feat(landing): '기설계교량 라이브러리' 카드를 '설계 DATA 아카이브'·'둘러보기'로 변경

카드 제목·버튼 문구와 팝업/닫기 접근성 이름을 함께 변경.

Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>

.gitignore

@@ -12,3 +12,6 @@ __pycache__/
 *.zip
 pierzainer_ground/data/cache/
 pierzainer_ground/data/output/**/cache/
+backup/
+verify/
+도면추출/output/

README.md

@@ -1,6 +1,14 @@
 # PIERZAINER · PIER & ABUT
 
-교각 Excel을 읽어 형상을 생성하고 원도면 기반 지반면·위성사진·2D 지도를 함께 표시하는 프로젝트입니다.
+교각·교대 Excel을 읽어 형상과 철근배근을 생성하고 원도면 기반 지반면·위성사진·2D 지도를 함께 표시하는 프로젝트입니다.
+
+## 현재 작업 상태 (2026-11-05 확인)
+
+- 현재 로컬 작업 브랜치는 `master`이며 제품 코드 기준 커밋은 `91c4a4a`입니다. 아래 11월 2일 복구 기록은 당시 이력입니다.
+- 교대 ② 형상계획 카드 6개와 ③ 철근배근 6개 부재(받침블럭·벽체·흉벽/브라켓·확대기초·날개벽·접속슬래브)가 구현되어 있습니다.
+- A1 표본으로 ③ 입력 재계산·삽도/3D 표시·철근 선택·파일 다운로드·새 페이지 저장 복원을 검증했습니다. 설계 미결 사항과 다른 입력의 동작은 별도 확인 대상입니다.
+- 최신 진행 기록은 `../../context-migration/컨텍스트_2026-11-03_교각_교대_진행상황.md`, 남은 항목은 `../../context-migration/OPEN_미해결목록.md`에서 관리합니다.
+- 로컬 `origin/master` 추적 정보 대비 89커밋 앞선 상태였습니다. 실제 원격은 조회하지 않았습니다. 브랜치 전환이나 이력 변경 전에 현재 상태를 확인하세요.
 
 ## 실행
 
@@ -11,19 +19,45 @@ npm run dev -- --host 127.0.0.1 --port 5173
 
 브라우저에서 http://127.0.0.1:5173/ 을 엽니다. 랜딩페이지의 Excel 가져오기와 실제 교량 샘플 선택을 사용합니다.
 
+랜딩페이지의 **도면 불러오기**를 누르면 프로그램 내부의 도면추출 팝업이 열립니다. DWG 폴더를 선택하고 자동 추출을 시작하면 진행 로그와 결과가 팝업에 표시됩니다. 결과의 **교각 불러오기**로 바로 Excel 인식·형상 생성 단계에 연결하거나 **Excel 저장**으로 파일을 받을 수 있습니다. 원래 추출 엔진은 화면 없이 실행하며 미확정 값은 검토 대상으로 유지합니다.
+
+결과는 프로젝트의 `도면추출/output/작업ID/`에 저장합니다. 선택한 원본 도면 폴더는 수정하지 않습니다. 팝업을 닫아도 추출은 계속되며 다시 열어 결과를 확인할 수 있습니다.
+
+배포 빌드를 로컬에서 실행하려면 `npm run build` 후 `npm run preview -- --host 127.0.0.1`을 사용합니다. 도면추출은 이 PC의 Windows 로컬 서버와 포함된 `도면추출/app` 엔진을 사용하므로, `dist`만 올린 정적 웹사이트에서는 추출을 실행할 수 없습니다.
+
 ## 유지하는 폴더
 
 - `src/`, `index.html`: 실제 교각 프로그램
 - `랜딩페이지/`: 랜딩 화면과 지도 포함 통합 샘플 12개
 - `pierzainer_ground/`: 지반 생성 프로그램, 원본 자료, 최종 지반 JSON 및 재현에 필요한 데이터
-- `도면추출_연동패키지_20261102/`: 도면 추출 프로그램과 교각 샘플 Excel
-- `public/`: 프로그램 리소스 및 기본 Excel 샘플
-- `tests/`, `scripts/`, `verify/`: 자동 검사와 유지보수 스크립트
+- `도면추출/`: 도면 추출 프로그램과 교각 샘플 Excel (기본 P1 샘플 포함)
+- `tests/`, `scripts/`, `verify/`: 현재 교각·Excel·지도 기능의 자동 검사와 유지보수 도구
 
 `node_modules/`, `dist/`, `.verify/`, 지반 `cache/`는 실행·검증 중 재생성되는 파일이며 Git에 추가하지 않습니다.
 
-## 2026-11-02 혼합 파일 복구
+## 검증
+
+```bash
+npm test -- --maxWorkers=2
+npm run build
+```
+
+A1 화면 검증 스크립트는 `scripts/verify-abut-workflow.cjs`입니다. 개발 서버와 별도 프로필 Chrome의 로컬 CDP 포트(기본 9444)가 필요합니다.
+
+현장타설 실배근의 현행 UI 검증은 `node scripts/verify-cast-rebar.cjs`를 사용합니다. Windows Chrome 사용 시 Windows Node로 실행합니다. 샘플 Excel에서 9개 교각·기초 조합을 생성하고 실제 주철근/횡철근/커플러 행·삽도·입력 재생성·불일치 경고·재료표·파일 저장/새 페이지 복원·헤더 3개 폭을 검사합니다. 결과는 `.verify/cast-rebar-20261106/`에 저장합니다. `verify-unified-input.cjs`는 실배근 연결 전 통합 입력 단계의 검증이고, `verify-cast-input.cjs`와 `verify-cast-detail.cjs`는 통합 전 분리 카드 선택자를 사용한 과거 검증 스크립트입니다.
+
+```text
+node scripts/verify-abut-workflow.cjs <input.xlsx> <output-directory> <download-directory>
+```
+
+Windows Chrome을 쓰면 Windows Node로 실행하고 입력·출력 경로도 Windows 경로 또는 WSL UNC 경로로 전달합니다. 결과 JSON·화면 캡처·SVG·프로젝트 표본은 `.verify/abut-workflow-20261105/`에 보관했습니다. `report.json`의 실행 결과와 범위를 확인하세요. 단순 재열기 검사는 같은 인자 뒤에 `--resume`을 붙일 수 있습니다.
+
+## 2026-11-02 혼합 파일 복구 (당시 기록)
 
 혼합 전 Pierzainer 커밋 `d6735a6`에서 로컬 브랜치 `recovery/pierzainer-20261102`를 만들었습니다. π형 Excel 인식, 전·후열 받침 수 불일치 허용, 랜딩페이지 샘플 연결을 포함합니다. 기존 ITAM 브랜치와 원격 기록은 변경하지 않았습니다.
 
-복구본과 분리한 파일은 상위 `_recovery/20261102_mixed_projects/`에 보관했습니다. 기존 `master`는 ITAM 코드이므로 그 브랜치로 전환하면 화면과 파일이 다시 바뀝니다. 현재 복구 브랜치에서 작업하세요. 이 작업에서는 원격 push를 수행하지 않았습니다.
+당시 복구 기록에는 분리 파일을 상위 `_recovery/20261102_mixed_projects/`에 보관하고, 당시 `master`가 ITAM 코드였다고 적혀 있습니다. 2026-11-05 현재 로컬 `master`는 Pierzainer 코드(`91c4a4a`)이므로 과거 안내에 따라 복구 브랜치로 전환하지 마세요. 당시 복구 보관 경로의 현존 여부는 이번 작업에서 재확인하지 않았습니다. 이번 검증·기록 정리에서도 원격 push와 브랜치 전환은 수행하지 않았습니다.
+
+## 정리 기준
+
+실행에 필요한 코드·원본 도면·샘플 Excel·최종 지반 JSON은 유지합니다. 과거 개발용 도구와 옛 좌표 기준의 검증 파일은 정리했으며 백업 목록은 상위 `_recovery/20261103_cleanup/`에 있습니다.

index.html

@@ -11,22 +11,27 @@
       <header class="top">
         <div class="brand">
           <strong>Pierzainer</strong>
-          <span>교각 설계</span>
           <span id="project-line" class="proj">프로젝트 미지정</span>
         </div>
         <nav class="steps" aria-label="단계">
-          <button id="nav-shape" class="step current" type="button" aria-current="step">① 형상 생성 <em id="step1-status">미생성</em></button>
-          <button id="nav-plan" class="step" type="button">② 형상계획 <em id="step2-status">예정</em></button>
-          <button id="nav-rebar" class="step" type="button">③ 철근배근 <em id="step3-status">예정</em></button>
-          <button id="nav-quantity" class="step" type="button">④ 재료표 <em id="step4-status">예정</em></button>
+          <button id="nav-shape" class="step current" data-label="① 형상 생성" aria-label="① 형상 생성" type="button" aria-current="step">① 형상 <em id="step1-status"></em></button>
+          <button id="nav-plan" class="step" data-label="② 형상계획" aria-label="② 형상계획" type="button">② 계획 <em id="step2-status"></em></button>
+          <button id="nav-rebar" class="step" data-label="③ 철근배근" aria-label="③ 철근배근" type="button">③ 배근 <em id="step3-status"></em></button>
+          <button id="nav-drawing" class="step" data-label="④ 도면작성" aria-label="④ 도면작성" type="button">④ 도면 <em id="step-drawing-status"></em></button>
+          <button id="nav-quantity" class="step" aria-label="⑤ 재료표·수량산출" type="button">⑤ 재료표·수량</button>
         </nav>
         <div class="actions">
           <span id="save-status" class="savest">저장 전</span>
-          <button id="home-from-app" class="btn-s" type="button" hidden>홈으로</button>
+          <button id="home-from-app" class="btn-s" type="button" hidden>홈</button>
           <button id="save-project" class="btn-s" type="button" disabled title="프로젝트 파일 저장 (Ctrl+S)">저장</button>
-          <button id="open-import" class="btn-s" type="button">엑셀 불러오기</button>
-          <button id="open-project" class="btn-s" type="button">프로젝트 열기</button>
-          <button id="regen" class="btn-p" type="button" disabled>선택 교각 형상 생성</button>
+          <details id="file-menu" class="file-menu">
+            <summary class="btn-s">불러오기</summary>
+            <div class="file-menu-items">
+              <button id="open-import" class="btn small" type="button">엑셀 불러오기</button>
+              <button id="open-project" class="btn small" type="button">프로젝트 열기</button>
+            </div>
+          </details>
+          <button id="regen" class="btn-p" type="button" disabled>생성</button>
           <input id="project-file" type="file" accept=".json" hidden />
         </div>
       </header>
@@ -43,7 +48,9 @@
 
       <main class="grid" id="view-shape">
         <aside class="panel piers" aria-labelledby="pier-title">
-          <p id="pier-title" class="lbl">교각 목록</p>
+          <button id="project-ground-open" class="btn-o" type="button">프로젝트 지반모델</button>
+          <p id="project-ground-status" class="pnote">모델 없음</p>
+          <p id="pier-title" class="lbl">교각·교대 목록</p>
           <div class="pier-tools">
             <label>형식
               <select id="type-filter"></select>
@@ -54,7 +61,7 @@
           <p id="pier-empty" class="muted">불러온 교각이 없습니다.</p>
           <p class="pnote">시트 1장 = 교각 1기입니다. 오류가 난 교각만 건너뛰고 나머지는 생성합니다.</p>
 
-          <section class="pier-input" aria-labelledby="input-title">
+          <section id="pier-info" class="pier-input" aria-labelledby="input-title">
             <p id="input-title" class="lbl">입력값</p>
             <div class="pier-table-wrap">
               <table id="inputs-all" class="grid-table compact">
@@ -71,6 +78,27 @@
               <button id="edit-regen" class="btn primary" type="button" disabled>다시 생성 · 변경 0</button>
             </section>
           </section>
+          <section id="abut-panel" class="pier-input" hidden aria-labelledby="abut-panel-title">
+            <p id="abut-panel-title" class="lbl"><span id="abut-panel-name"></span> 입력값 <span class="badge">입력</span>
+              <button id="abut-panel-edit-toggle" class="btn small" type="button" aria-expanded="false">편집</button></p>
+            <dl id="abut-panel-input" class="kv wide"></dl>
+            <div id="abut-panel-editor" hidden>
+              <div id="abut-panel-basic" class="edit-row"></div>
+              <details class="abut-group">
+                <summary>받침 값</summary>
+                <div id="abut-panel-bearings" class="edit-row"></div>
+              </details>
+              <details class="abut-group">
+                <summary>형상 (벽체·흉벽, 저판, 말뚝)</summary>
+                <div id="abut-panel-shape" class="edit-row"></div>
+              </details>
+              <p id="abut-panel-msg" class="muted" aria-live="polite"></p>
+            </div>
+            <details class="abut-group">
+              <summary>상세 (계산값)</summary>
+              <dl id="abut-panel-summary" class="kv wide"></dl>
+            </details>
+          </section>
         </aside>
 
         <section class="panel viewer" id="viewer-block" aria-labelledby="viewer-title">
@@ -159,15 +187,44 @@
 
       <main class="grid plan" id="view-plan" hidden>
         <aside class="panel piers" aria-labelledby="plan-pier-title">
-          <p id="plan-pier-title" class="lbl">교각 목록</p>
+          <p id="plan-pier-title" class="lbl">교각·교대 목록</p>
           <div class="phead" aria-hidden="true"><span>교각</span><span>변경</span></div>
           <ul id="plan-pier-items" class="pier-items"></ul>
+          <p class="lbl abut-members-title">부재 · 교대</p>
+          <ul id="abut-members" class="members abut-members" aria-label="교대 부재"></ul>
           <p class="lbl members-title">부재 · 5개</p>
           <ul id="members" class="members"></ul>
         </aside>
 
-        <div class="center-col">
+        <div class="center-col workspace" id="plan-workspace" data-stage="plan">
+          <div class="workspace-tools" aria-label="계획 화면 배치 조절">
+            <div class="layout-switch" role="group" aria-label="모델과 입력창 배치">
+              <button type="button" class="btn small" data-layout="stack" aria-pressed="true">상하</button>
+              <button type="button" class="btn small" data-layout="side" aria-pressed="false">좌우</button>
+            </div>
+            <label class="model-height-control" for="plan-model-height"><span data-size-label>모델 높이</span>
+              <input id="plan-model-height" type="range" min="180" max="560" step="20" value="400" />
+              <output id="plan-model-height-value" for="plan-model-height">400 px</output>
+            </label>
+            <button id="plan-model-toggle" class="btn small" type="button" aria-expanded="true" aria-controls="slot-plan">모델 접기</button>
+            <span class="layout-note muted small" aria-live="polite"></span>
+          </div>
           <div class="viewer-slot" id="slot-plan"></div>
+          <div class="workspace-splitter" role="separator" tabindex="0" aria-controls="slot-plan" aria-label="모델 크기 조절"></div>
+          <div class="workspace-pane">
+          <!-- ② 교대 부재 카드 (시안, 2026-11-03): the card of the row picked in 부재 · 교대, under the 3D view. -->
+          <section id="abut-panel-plan" class="panel viewer abut-card" hidden aria-labelledby="abut-panel-plan-title">
+            <div class="viewer-head">
+              <h2 id="abut-panel-plan-title"><span id="abut-panel-plan-member">교량받침 · 받침블럭 · 솔플레이트</span> <span class="muted small" id="abut-panel-plan-name"></span></h2>
+            </div>
+            <div id="abut-panel-plan-bearings" class="edit-row"></div>
+            <div id="abut-panel-plan-wing" class="edit-row"></div>
+            <div id="abut-panel-plan-slab" class="edit-row"></div>
+            <div id="abut-panel-plan-ground" class="edit-row"></div>
+            <div id="abut-panel-plan-shape" class="edit-row abut-shape-view"></div>
+            <div id="abut-panel-plan-footing" class="edit-row abut-shape-view"></div>
+            <p id="abut-panel-plan-msg" class="muted" aria-live="polite"></p>
+          </section>
         <section class="panel viewer" aria-labelledby="member-title">
           <div class="viewer-head">
             <h2 id="member-title">코핑</h2>
@@ -218,6 +275,7 @@
                   </section>
         </section>
           </div>
+        </div>
 
         <aside class="panel results" aria-labelledby="changes-title">
           <h2 id="changes-title">기본값 대비 변경</h2>
@@ -227,6 +285,8 @@
         </aside>
       </main>
 
+      <main id="view-drawing" hidden aria-label="교각 일반도 작성"></main>
+
       <main class="grid quantity" id="view-quantity" hidden>
         <aside class="panel piers" aria-labelledby="quantity-pier-title">
           <p id="quantity-pier-title" class="lbl">교각 목록</p>
@@ -236,6 +296,7 @@
         </aside>
         <section class="panel viewer" aria-labelledby="quantity-title">
           <div class="viewer-head">
+            <button id="quantity-back" class="btn-o" type="button">← ③ 철근배근</button>
             <h2 id="quantity-title">철근재료표</h2>
             <button id="quantity-export" class="btn-o" type="button">엑셀로 내보내기</button>
             <button id="quantity-print" class="btn-o" type="button">인쇄</button>
@@ -252,35 +313,54 @@
           <ul id="rebar-tabs" class="members"></ul>
           <p class="pnote">형상은 ② 형상계획 기준입니다. 형상이 바뀌면 "형상 바뀜"으로 표시합니다.</p>
         </aside>
-        <div class="center-col">
+        <div class="center-col workspace review-workspace" id="review-workspace" data-stage="rebar">
+          <div class="workspace-tools" aria-label="검토 공간 조절">
+            <div class="layout-switch" role="group" aria-label="모델과 철근표 배치">
+              <button type="button" class="btn small" data-layout="stack" aria-pressed="true">상하</button>
+              <button type="button" class="btn small" data-layout="side" aria-pressed="false">좌우</button>
+            </div>
+            <label class="model-height-control" for="review-model-height"><span data-size-label>모델 높이</span>
+              <input id="review-model-height" type="range" min="180" max="560" step="20" value="240" />
+              <output id="review-model-height-value" for="review-model-height">240 px</output>
+            </label>
+            <button id="review-model-toggle" class="btn small" type="button" aria-expanded="true" aria-controls="slot-rebar">모델 접기</button>
+            <button id="review-inputs" class="btn small" type="button">입력 보기</button>
+            <button id="review-table" class="btn small" type="button">철근표 보기</button>
+            <span class="layout-note muted small" aria-live="polite"></span>
+          </div>
           <div class="viewer-slot" id="slot-rebar"></div>
+          <div class="workspace-splitter" role="separator" tabindex="0" aria-controls="slot-rebar" aria-label="모델 크기 조절"></div>
+          <div class="workspace-pane">
         <section class="panel viewer" aria-labelledby="rebar-title">
-          <div class="viewer-head"><h2 id="rebar-title">철근표</h2></div>
+          <div class="viewer-head"><h2 id="rebar-title">철근표</h2><button id="rebar-materials" class="btn-o" type="button">재료표·수량산출 보기</button></div>
           <p id="rebar-note" class="num"></p>
           <div id="rebar-table"></div>
         </section>
           </div>
+        </div>
         <aside class="panel results" aria-labelledby="rebar-issues-title">
           <h2 id="rebar-issues-title">알림</h2>
           <ul id="rebar-issues" class="issues"></ul>
-          <h2>검토 필요 (결정 대기)</h2>
-          <ul class="issues">
-            <li>Q-B5 B1·B3·B5·B7 다리 길이 (제안값 사용)</li>
-            <li>Q-B6 B2·B6 이음 위치와 길이</li>
-            <li>Q-C9 P4–B11 간섭: 무시로 결정, 문서 반영 필요</li>
-          </ul>
+          <h2>부재 검토</h2>
+          <p id="review-summary" class="muted small" aria-live="polite"></p>
+          <ul id="review-tasks" class="issues review-tasks"></ul>
           <section class="common" aria-labelledby="common-title">
-            <p id="common-title" class="lbl">공통 설정</p>
+            <h3 id="common-title">공통 설정</h3>
+            <fieldset class="material-fields">
+            <legend>재료</legend>
             <label class="mat">fck (MPa) <input id="mat-fck" type="number" step="any" /></label>
             <label class="mat">D 규격 강도 <select id="mat-grade-d"><option value="300" selected>SD300</option><option value="400">SD400</option><option value="500">SD500</option></select></label>
             <label class="mat">H 규격 강도 <select id="mat-grade-h"><option value="300">SD300</option><option value="400" selected>SD400</option><option value="500">SD500</option></select></label>
             <label class="mat">S 규격 강도 <select id="mat-grade-s"><option value="300">SD300</option><option value="400">SD400</option><option value="500" selected>SD500</option></select></label>
             <label class="mat">재료표 할증 (%) · 기본 0 가정 <input id="mat-waste" type="number" step="0.5" min="0" /></label>
-            <p class="lbl">굽힘 내면반경 (× 철근 지름)</p>
+            </fieldset>
+            <fieldset class="material-fields">
+            <legend>굽힘 내면반경 (× 철근 지름)</legend>
             <label class="mat">D16 이하 <input id="bend-small16" type="number" step="0.5" min="0.5" /></label>
             <label class="mat">D19–D25 <input id="bend-main25" type="number" step="0.5" min="0.5" /></label>
             <label class="mat">D29–D35 <input id="bend-main35" type="number" step="0.5" min="0.5" /></label>
             <label class="mat">D38 이상 <input id="bend-main51" type="number" step="0.5" min="0.5" /></label>
+            </fieldset>
             <p id="mat-note" class="muted small"></p>
           </section>
         </aside>
@@ -353,20 +433,22 @@
         <div class="dlg-col">
           <section>
             <h3>미리보기</h3>
-            <p id="preview-title" class="muted"></p>
+            <p id="preview-title" class="muted" aria-live="polite"></p>
             <h4>교각 정보</h4>
             <div class="pv-scroll"><table id="pv-pier" class="grid-table"></table></div>
+            <h4>교대 정보</h4>
+            <div class="pv-scroll"><table id="pv-abuts" class="grid-table"></table></div>
             <h4>받침</h4>
             <div class="pv-scroll">
               <table id="pv-bearings" class="grid-table">
-                <thead><tr><th>교각</th><th>번호</th><th>x (m)</th><th>y (m)</th><th>z (m)</th><th>방위각</th><th>위치</th></tr></thead>
+                <thead><tr><th>구조물</th><th>번호</th><th>x (m)</th><th>y (m)</th><th>z (m)</th><th>방위각</th><th>위치</th></tr></thead>
                 <tbody></tbody>
               </table>
             </div>
             <h4>IP</h4>
             <div class="pv-scroll">
               <table id="pv-ips" class="grid-table">
-                <thead><tr><th>교각</th><th>점</th><th>x (m)</th><th>y (m)</th><th>꺾임각</th></tr></thead>
+                <thead><tr><th>구조물</th><th>점</th><th>x (m)</th><th>y (m)</th><th>꺾임각</th></tr></thead>
                 <tbody></tbody>
               </table>
             </div>
@@ -375,9 +457,9 @@
       </div>
 
       <footer class="dlg-foot">
-        <span id="dlg-selected" class="muted"></span>
+        <span id="dlg-selected" class="muted" aria-live="polite"></span>
         <button id="dlg-cancel" class="btn" type="button">취소</button>
-        <button id="dlg-apply" class="btn primary" type="button" disabled>선택한 교각 0기 형상 생성</button>
+        <button id="dlg-apply" class="btn primary" type="button" disabled>불러올 구조물을 선택하세요</button>
       </footer>
     </dialog>
 

package.json

@@ -4,6 +4,7 @@
   "description": "교각 3D 형상 생성 웹앱 (1단계: 형상 생성)",
   "scripts": {
     "dev": "vite",
+    "preview": "vite preview",
     "build": "tsc --noEmit && vite build",
     "typecheck": "tsc --noEmit",
     "test": "vitest run"

pierzainer_ground/build_sample_grounds.py

@@ -16,7 +16,7 @@ import traceback
 
 ROOT = Path(__file__).resolve().parent
 OUTPUT = ROOT / 'data/output/samples_20261102'
-PACKAGE = ROOT.parent / '도면추출_연동패키지_20261102'
+PACKAGE = ROOT.parent / '도면추출'
 
 
 def save(path, value):

pierzainer_ground/data/output/samples_20261102/01_산외교/generation_settings.json

@@ -5,7 +5,7 @@
   "terrain_crs": "EPSG:5183",
   "cad_axes": "YX",
   "terrain_block": "CSSAA14",
-  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플01_산외교_교각입력데이터.xlsx",
+  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플01_산외교_교각입력데이터.xlsx",
   "boreholes": "",
   "layers": "",
   "margin": 100.0,

pierzainer_ground/data/output/samples_20261102/01_산외교/result.json

@@ -1,7 +1,7 @@
 {
   "sample": 1,
   "bridge": "산외교",
-  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플01_산외교_교각입력데이터.xlsx",
+  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플01_산외교_교각입력데이터.xlsx",
   "drawing": "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample1)_π형교각_산외교\\02.종평면도(울산)_2017.0619-수정.dwg",
   "candidates": [
     "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample1)_π형교각_산외교\\02.종평면도(울산)_2017.0619-수정.dwg"

pierzainer_ground/data/output/samples_20261102/02_운곡교/generation_settings.json

@@ -5,7 +5,7 @@
   "terrain_crs": "EPSG:5186",
   "cad_axes": "YX",
   "terrain_block": "",
-  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플02_운곡교_교각입력데이터.xlsx",
+  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플02_운곡교_교각입력데이터.xlsx",
   "boreholes": "",
   "layers": "CA002,CA0021,CAA001,CAA002",
   "margin": 100.0,

pierzainer_ground/data/output/samples_20261102/02_운곡교/result.json

@@ -1,7 +1,7 @@
 {
   "sample": 2,
   "bridge": "운곡교",
-  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플02_운곡교_교각입력데이터.xlsx",
+  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플02_운곡교_교각입력데이터.xlsx",
   "drawing": "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample2)_T형교각_운곡교\\C0050202-001-운곡교 종평면도(완도방향).dwg",
   "candidates": [
     "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample2)_T형교각_운곡교\\C0050202-001-운곡교 종평면도(완도방향).dwg"

pierzainer_ground/data/output/samples_20261102/03_대호지교/generation_settings.json

@@ -5,7 +5,7 @@
   "terrain_crs": "EPSG:5186",
   "cad_axes": "YX",
   "terrain_block": "*Model_Space",
-  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플03_대호지교_교각입력데이터.xlsx",
+  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플03_대호지교_교각입력데이터.xlsx",
   "boreholes": "",
   "layers": "PDF_SOUNDING",
   "margin": 100.0,

pierzainer_ground/data/output/samples_20261102/03_대호지교/result.json

@@ -1,7 +1,7 @@
 {
   "sample": 3,
   "bridge": "대호지교",
-  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플03_대호지교_교각입력데이터.xlsx",
+  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플03_대호지교_교각입력데이터.xlsx",
   "drawing": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\pierzainer_ground\\data\\input\\samples_20261102\\recovered\\03_original_pdf_soundings.dxf",
   "candidates": [],
   "output": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\pierzainer_ground\\data\\output\\samples_20261102\\03_대호지교",

pierzainer_ground/data/output/samples_20261102/04_목동교/generation_settings.json

@@ -5,7 +5,7 @@
   "terrain_crs": "EPSG:5186",
   "cad_axes": "YX",
   "terrain_block": "",
-  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플04_목동교_교각입력데이터.xlsx",
+  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플04_목동교_교각입력데이터.xlsx",
   "boreholes": "",
   "layers": "CA002,CA0021,CAA001,CAA002",
   "margin": 100.0,

pierzainer_ground/data/output/samples_20261102/04_목동교/result.json

@@ -1,7 +1,7 @@
 {
   "sample": 4,
   "bridge": "목동교",
-  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플04_목동교_교각입력데이터.xlsx",
+  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플04_목동교_교각입력데이터.xlsx",
   "drawing": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\pierzainer_ground\\data\\input\\samples_20261102\\recovered\\04_@서울-세종 9공구 1000현황.dwg",
   "candidates": [
     "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample4)_π형교각_목동교\\01 공통사항(목동교 종평면도).dwg"

pierzainer_ground/data/output/samples_20261102/05_승천천교/generation_settings.json

@@ -5,7 +5,7 @@
   "terrain_crs": "EPSG:5186",
   "cad_axes": "YX",
   "terrain_block": "",
-  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플05_승천천교_교각입력데이터.xlsx",
+  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플05_승천천교_교각입력데이터.xlsx",
   "boreholes": "",
   "layers": "F0017111,F0017114,F0027217,F0027132",
   "margin": 100.0,

pierzainer_ground/data/output/samples_20261102/05_승천천교/result.json

@@ -1,7 +1,7 @@
 {
   "sample": 5,
   "bridge": "승천천교",
-  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플05_승천천교_교각입력데이터.xlsx",
+  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플05_승천천교_교각입력데이터.xlsx",
   "drawing": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\pierzainer_ground\\data\\input\\samples_20261102\\recovered\\05_project_topography_original.dwg",
   "candidates": [
     "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample5)_π형교각_승천천교\\01 승천천교(DR) 종평면도.dwg"

pierzainer_ground/data/output/samples_20261102/06_계문철교/generation_settings.json

@@ -5,7 +5,7 @@
   "terrain_crs": "EPSG:5186",
   "cad_axes": "YX",
   "terrain_block": "xref-현황(191219)",
-  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플06_계문철교_교각입력데이터.xlsx",
+  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플06_계문철교_교각입력데이터.xlsx",
   "boreholes": "",
   "layers": "",
   "margin": 100.0,

pierzainer_ground/data/output/samples_20261102/06_계문철교/result.json

@@ -1,7 +1,7 @@
 {
   "sample": 6,
   "bridge": "계문철교",
-  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플06_계문철교_교각입력데이터.xlsx",
+  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플06_계문철교_교각입력데이터.xlsx",
   "drawing": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\pierzainer_ground\\data\\input\\samples_20261102\\recovered\\06_서수평장1-현황+선형+노리-20200410.dwg",
   "candidates": [
     "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample6)_π형교각_계문철교\\01 계문철교 종평면도.dwg"

pierzainer_ground/data/output/samples_20261102/07_기양천교/generation_settings.json

@@ -5,7 +5,7 @@
   "terrain_crs": "EPSG:5186",
   "cad_axes": "YX",
   "terrain_block": "xref-현황(191219)",
-  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플07_기양천교_교각입력데이터.xlsx",
+  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플07_기양천교_교각입력데이터.xlsx",
   "boreholes": "",
   "layers": "",
   "margin": 100.0,

pierzainer_ground/data/output/samples_20261102/07_기양천교/result.json

@@ -1,7 +1,7 @@
 {
   "sample": 7,
   "bridge": "기양천교",
-  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플07_기양천교_교각입력데이터.xlsx",
+  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플07_기양천교_교각입력데이터.xlsx",
   "drawing": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\pierzainer_ground\\data\\input\\samples_20261102\\recovered\\06_서수평장1-현황+선형+노리-20200410.dwg",
   "candidates": [
     "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample7)_π형교각_기양천교\\01 기양천교종평면도.dwg"

pierzainer_ground/data/output/samples_20261102/08_옥성교/generation_settings.json

@@ -5,7 +5,7 @@
   "terrain_crs": "EPSG:5186",
   "cad_axes": "YX",
   "terrain_block": "XR_현황",
-  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플08_옥성교_교각입력데이터.xlsx",
+  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플08_옥성교_교각입력데이터.xlsx",
   "boreholes": "",
   "layers": "",
   "margin": 100.0,

pierzainer_ground/data/output/samples_20261102/08_옥성교/result.json

@@ -1,7 +1,7 @@
 {
   "sample": 8,
   "bridge": "옥성교",
-  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플08_옥성교_교각입력데이터.xlsx",
+  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플08_옥성교_교각입력데이터.xlsx",
   "drawing": "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample8)_T형교각_옥성교\\01 옥성교 종평면도.dwg",
   "candidates": [
     "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample8)_T형교각_옥성교\\01 옥성교 종평면도.dwg"

pierzainer_ground/data/output/samples_20261102/09_새재1교/generation_settings.json

@@ -5,7 +5,7 @@
   "terrain_crs": "EPSG:5186",
   "cad_axes": "YX",
   "terrain_block": "*Model_Space",
-  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플09_새재1교_교각입력데이터.xlsx",
+  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플09_새재1교_교각입력데이터.xlsx",
   "boreholes": "",
   "layers": "XR_현황-수정$0$Point",
   "margin": 100.0,

pierzainer_ground/data/output/samples_20261102/09_새재1교/result.json

@@ -1,7 +1,7 @@
 {
   "sample": 9,
   "bridge": "새재1교",
-  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플09_새재1교_교각입력데이터.xlsx",
+  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플09_새재1교_교각입력데이터.xlsx",
   "drawing": "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample9)_T형교각_새재1교\\01 새재1교 종평면도.dwg",
   "candidates": [
     "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample9)_T형교각_새재1교\\01 새재1교 종평면도.dwg"

pierzainer_ground/data/output/samples_20261102/10_도하4교/generation_settings.json

@@ -5,7 +5,7 @@
   "terrain_crs": "EPSG:5186",
   "cad_axes": "YX",
   "terrain_block": "*Model_Space",
-  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플10_도하4교_교각입력데이터.xlsx",
+  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플10_도하4교_교각입력데이터.xlsx",
   "boreholes": "",
   "layers": "CA002,CA0021,CAA001,CAA002",
   "margin": 100.0,

pierzainer_ground/data/output/samples_20261102/10_도하4교/result.json

@@ -1,7 +1,7 @@
 {
   "sample": 10,
   "bridge": "도하4교",
-  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플10_도하4교_교각입력데이터.xlsx",
+  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플10_도하4교_교각입력데이터.xlsx",
   "drawing": "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample10)_T형교각_도하4교\\01.종평면도.dwg",
   "candidates": [
     "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample10)_T형교각_도하4교\\01.종평면도.dwg"

pierzainer_ground/data/output/samples_20261102/11_곡천교/generation_settings.json

@@ -5,7 +5,7 @@
   "terrain_crs": "EPSG:5186",
   "cad_axes": "YX",
   "terrain_block": "*Model_Space",
-  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플11_곡천교_교각입력데이터.xlsx",
+  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플11_곡천교_교각입력데이터.xlsx",
   "boreholes": "",
   "layers": "CA002,CA0021,CAA001,CAA002",
   "margin": 100.0,

pierzainer_ground/data/output/samples_20261102/11_곡천교/result.json

@@ -1,7 +1,7 @@
 {
   "sample": 11,
   "bridge": "곡천교",
-  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플11_곡천교_교각입력데이터.xlsx",
+  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플11_곡천교_교각입력데이터.xlsx",
   "drawing": "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample11)_π형교각_곡천교\\01 종평면도_곡천교.dwg",
   "candidates": [
     "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample11)_π형교각_곡천교\\01 종평면도_곡천교.dwg"

pierzainer_ground/data/output/samples_20261102/12_감북교/generation_settings.json

@@ -5,7 +5,7 @@
   "terrain_crs": "EPSG:5181",
   "cad_axes": "YX",
   "terrain_block": "",
-  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플12_감북교_교각입력데이터.xlsx",
+  "piers": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플12_감북교_교각입력데이터.xlsx",
   "boreholes": "",
   "layers": "CAA001,CAA002",
   "margin": 100.0,

pierzainer_ground/data/output/samples_20261102/12_감북교/result.json

@@ -1,7 +1,7 @@
 {
   "sample": 12,
   "bridge": "감북교",
-  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플12_감북교_교각입력데이터.xlsx",
+  "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플12_감북교_교각입력데이터.xlsx",
   "drawing": "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample12)_π형교각_감북교\\01 감북교 종평면도.dwg",
   "candidates": [
     "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample12)_π형교각_감북교\\01 감북교 종평면도.dwg"

pierzainer_ground/data/output/samples_20261102/inputs.json

@@ -2,7 +2,7 @@
   {
     "sample": 1,
     "bridge": "산외교",
-    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플01_산외교_교각입력데이터.xlsx",
+    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플01_산외교_교각입력데이터.xlsx",
     "drawing": "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample1)_π형교각_산외교\\02.종평면도(울산)_2017.0619-수정.dwg",
     "candidates": [
       "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample1)_π형교각_산외교\\02.종평면도(울산)_2017.0619-수정.dwg"
@@ -12,7 +12,7 @@
   {
     "sample": 2,
     "bridge": "운곡교",
-    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플02_운곡교_교각입력데이터.xlsx",
+    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플02_운곡교_교각입력데이터.xlsx",
     "drawing": "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample2)_T형교각_운곡교\\C0050202-001-운곡교 종평면도(완도방향).dwg",
     "candidates": [
       "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample2)_T형교각_운곡교\\C0050202-001-운곡교 종평면도(완도방향).dwg"
@@ -22,7 +22,7 @@
   {
     "sample": 3,
     "bridge": "대호지교",
-    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플03_대호지교_교각입력데이터.xlsx",
+    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플03_대호지교_교각입력데이터.xlsx",
     "drawing": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\pierzainer_ground\\data\\input\\samples_20261102\\recovered\\03_original_pdf_soundings.dxf",
     "candidates": [],
     "output": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\pierzainer_ground\\data\\output\\samples_20261102\\03_대호지교",
@@ -930,7 +930,7 @@
   {
     "sample": 4,
     "bridge": "목동교",
-    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플04_목동교_교각입력데이터.xlsx",
+    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플04_목동교_교각입력데이터.xlsx",
     "drawing": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\pierzainer_ground\\data\\input\\samples_20261102\\recovered\\04_@서울-세종 9공구 1000현황.dwg",
     "candidates": [
       "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample4)_π형교각_목동교\\01 공통사항(목동교 종평면도).dwg"
@@ -956,7 +956,7 @@
   {
     "sample": 5,
     "bridge": "승천천교",
-    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플05_승천천교_교각입력데이터.xlsx",
+    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플05_승천천교_교각입력데이터.xlsx",
     "drawing": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\pierzainer_ground\\data\\input\\samples_20261102\\recovered\\05_project_topography_original.dwg",
     "candidates": [
       "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample5)_π형교각_승천천교\\01 승천천교(DR) 종평면도.dwg"
@@ -984,7 +984,7 @@
   {
     "sample": 6,
     "bridge": "계문철교",
-    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플06_계문철교_교각입력데이터.xlsx",
+    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플06_계문철교_교각입력데이터.xlsx",
     "drawing": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\pierzainer_ground\\data\\input\\samples_20261102\\recovered\\06_서수평장1-현황+선형+노리-20200410.dwg",
     "candidates": [
       "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample6)_π형교각_계문철교\\01 계문철교 종평면도.dwg"
@@ -1011,7 +1011,7 @@
   {
     "sample": 7,
     "bridge": "기양천교",
-    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플07_기양천교_교각입력데이터.xlsx",
+    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플07_기양천교_교각입력데이터.xlsx",
     "drawing": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\pierzainer_ground\\data\\input\\samples_20261102\\recovered\\06_서수평장1-현황+선형+노리-20200410.dwg",
     "candidates": [
       "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample7)_π형교각_기양천교\\01 기양천교종평면도.dwg"
@@ -1038,7 +1038,7 @@
   {
     "sample": 8,
     "bridge": "옥성교",
-    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플08_옥성교_교각입력데이터.xlsx",
+    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플08_옥성교_교각입력데이터.xlsx",
     "drawing": "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample8)_T형교각_옥성교\\01 옥성교 종평면도.dwg",
     "candidates": [
       "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample8)_T형교각_옥성교\\01 옥성교 종평면도.dwg"
@@ -1048,7 +1048,7 @@
   {
     "sample": 9,
     "bridge": "새재1교",
-    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플09_새재1교_교각입력데이터.xlsx",
+    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플09_새재1교_교각입력데이터.xlsx",
     "drawing": "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample9)_T형교각_새재1교\\01 새재1교 종평면도.dwg",
     "candidates": [
       "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample9)_T형교각_새재1교\\01 새재1교 종평면도.dwg"
@@ -1058,7 +1058,7 @@
   {
     "sample": 10,
     "bridge": "도하4교",
-    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플10_도하4교_교각입력데이터.xlsx",
+    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플10_도하4교_교각입력데이터.xlsx",
     "drawing": "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample10)_T형교각_도하4교\\01.종평면도.dwg",
     "candidates": [
       "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample10)_T형교각_도하4교\\01.종평면도.dwg"
@@ -1068,7 +1068,7 @@
   {
     "sample": 11,
     "bridge": "곡천교",
-    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플11_곡천교_교각입력데이터.xlsx",
+    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플11_곡천교_교각입력데이터.xlsx",
     "drawing": "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample11)_π형교각_곡천교\\01 종평면도_곡천교.dwg",
     "candidates": [
       "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample11)_π형교각_곡천교\\01 종평면도_곡천교.dwg"
@@ -1078,7 +1078,7 @@
   {
     "sample": 12,
     "bridge": "감북교",
-    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플12_감북교_교각입력데이터.xlsx",
+    "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플12_감북교_교각입력데이터.xlsx",
     "drawing": "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample12)_π형교각_감북교\\01 감북교 종평면도.dwg",
     "candidates": [
       "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample12)_π형교각_감북교\\01 감북교 종평면도.dwg"

pierzainer_ground/data/output/samples_20261102/summary.json

@@ -7,7 +7,7 @@
     {
       "sample": 1,
       "bridge": "산외교",
-      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플01_산외교_교각입력데이터.xlsx",
+      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플01_산외교_교각입력데이터.xlsx",
       "drawing": "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample1)_π형교각_산외교\\02.종평면도(울산)_2017.0619-수정.dwg",
       "candidates": [
         "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample1)_π형교각_산외교\\02.종평면도(울산)_2017.0619-수정.dwg"
@@ -41,7 +41,7 @@
     {
       "sample": 2,
       "bridge": "운곡교",
-      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플02_운곡교_교각입력데이터.xlsx",
+      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플02_운곡교_교각입력데이터.xlsx",
       "drawing": "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample2)_T형교각_운곡교\\C0050202-001-운곡교 종평면도(완도방향).dwg",
       "candidates": [
         "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample2)_T형교각_운곡교\\C0050202-001-운곡교 종평면도(완도방향).dwg"
@@ -75,7 +75,7 @@
     {
       "sample": 3,
       "bridge": "대호지교",
-      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플03_대호지교_교각입력데이터.xlsx",
+      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플03_대호지교_교각입력데이터.xlsx",
       "drawing": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\pierzainer_ground\\data\\input\\samples_20261102\\recovered\\03_original_pdf_soundings.dxf",
       "candidates": [],
       "output": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\pierzainer_ground\\data\\output\\samples_20261102\\03_대호지교",
@@ -1007,7 +1007,7 @@
     {
       "sample": 4,
       "bridge": "목동교",
-      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플04_목동교_교각입력데이터.xlsx",
+      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플04_목동교_교각입력데이터.xlsx",
       "drawing": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\pierzainer_ground\\data\\input\\samples_20261102\\recovered\\04_@서울-세종 9공구 1000현황.dwg",
       "candidates": [
         "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample4)_π형교각_목동교\\01 공통사항(목동교 종평면도).dwg"
@@ -1057,7 +1057,7 @@
     {
       "sample": 5,
       "bridge": "승천천교",
-      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플05_승천천교_교각입력데이터.xlsx",
+      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플05_승천천교_교각입력데이터.xlsx",
       "drawing": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\pierzainer_ground\\data\\input\\samples_20261102\\recovered\\05_project_topography_original.dwg",
       "candidates": [
         "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample5)_π형교각_승천천교\\01 승천천교(DR) 종평면도.dwg"
@@ -1109,7 +1109,7 @@
     {
       "sample": 6,
       "bridge": "계문철교",
-      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플06_계문철교_교각입력데이터.xlsx",
+      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플06_계문철교_교각입력데이터.xlsx",
       "drawing": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\pierzainer_ground\\data\\input\\samples_20261102\\recovered\\06_서수평장1-현황+선형+노리-20200410.dwg",
       "candidates": [
         "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample6)_π형교각_계문철교\\01 계문철교 종평면도.dwg"
@@ -1160,7 +1160,7 @@
     {
       "sample": 7,
       "bridge": "기양천교",
-      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플07_기양천교_교각입력데이터.xlsx",
+      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플07_기양천교_교각입력데이터.xlsx",
       "drawing": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\pierzainer_ground\\data\\input\\samples_20261102\\recovered\\06_서수평장1-현황+선형+노리-20200410.dwg",
       "candidates": [
         "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample7)_π형교각_기양천교\\01 기양천교종평면도.dwg"
@@ -1211,7 +1211,7 @@
     {
       "sample": 8,
       "bridge": "옥성교",
-      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플08_옥성교_교각입력데이터.xlsx",
+      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플08_옥성교_교각입력데이터.xlsx",
       "drawing": "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample8)_T형교각_옥성교\\01 옥성교 종평면도.dwg",
       "candidates": [
         "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample8)_T형교각_옥성교\\01 옥성교 종평면도.dwg"
@@ -1245,7 +1245,7 @@
     {
       "sample": 9,
       "bridge": "새재1교",
-      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플09_새재1교_교각입력데이터.xlsx",
+      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플09_새재1교_교각입력데이터.xlsx",
       "drawing": "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample9)_T형교각_새재1교\\01 새재1교 종평면도.dwg",
       "candidates": [
         "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample9)_T형교각_새재1교\\01 새재1교 종평면도.dwg"
@@ -1279,7 +1279,7 @@
     {
       "sample": 10,
       "bridge": "도하4교",
-      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플10_도하4교_교각입력데이터.xlsx",
+      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플10_도하4교_교각입력데이터.xlsx",
       "drawing": "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample10)_T형교각_도하4교\\01.종평면도.dwg",
       "candidates": [
         "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample10)_T형교각_도하4교\\01.종평면도.dwg"
@@ -1313,7 +1313,7 @@
     {
       "sample": 11,
       "bridge": "곡천교",
-      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플11_곡천교_교각입력데이터.xlsx",
+      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플11_곡천교_교각입력데이터.xlsx",
       "drawing": "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample11)_π형교각_곡천교\\01 종평면도_곡천교.dwg",
       "candidates": [
         "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample11)_π형교각_곡천교\\01 종평면도_곡천교.dwg"
@@ -1347,7 +1347,7 @@
     {
       "sample": 12,
       "bridge": "감북교",
-      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출_연동패키지_20261102\\samples\\샘플12_감북교_교각입력데이터.xlsx",
+      "workbook": "C:\\Users\\User\\Desktop\\Pier_v1-main\\Pier_v1\\도면추출\\samples\\샘플12_감북교_교각입력데이터.xlsx",
       "drawing": "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample12)_π형교각_감북교\\01 감북교 종평면도.dwg",
       "candidates": [
         "C:\\Users\\User\\Desktop\\도면추출\\엔지니어(sample12)_π형교각_감북교\\01 감북교 종평면도.dwg"

pierzainer_ground/docs/APP_LINK.md

@@ -0,0 +1,15 @@
+# 프로그램 내부 지반 생성 팝업
+
+현재 지반 생성 버튼은 별도 Windows 창 대신 프로그램 내부 dialog를 연다.
+- Excel 시작: 현재 Excel이 연결되며 종평면도 DWG/DXF를 선택한 뒤 지반 생성을 누른다.
+- 도면 시작: 추출 폴더의 종평면도 원본과 Excel이 연결되며 지반 생성을 누른다.
+- 입력을 바꾸려면 팝업의 파일 선택을 사용한다. Excel 연결 정보가 없는 프로젝트는 Excel도 선택한다.
+- 기존 Python build_from_files 엔진을 창 없이 실행한다. BAT를 브라우저 안에 직접 삽입하는 방식이 아니며, 독립 실행용 BAT는 유지한다.
+- 진행 로그와 오류를 팝업에 표시한다. 닫아도 작업은 계속되며 다시 열 수 있다.
+- 완료 결과는 기존 JSON 로더에 전달한다. 지반·지층 패널을 벗어나면 복귀 후 반영한다.
+- 결과는 data/output/app_<작업 ID>에 저장한다. 원본 자료는 변경하지 않는다.
+- Windows 로컬 Vite 서버가 필요하다. 정적 호스팅에서는 실행할 수 없다.
+
+검증: TypeScript 검사 및 기존 후보 선택 테스트 3건 통과. 브라우저에서 실제 prepare API, 팝업 표시, 입력 누락 오류, 닫기 및 즉시 재열기 확인. 이번 팝업 수정에서 새 도면 전체 생성은 실행하지 않았다.
+
+주요 파일: ground-link.ts, ground-link-server.ts, ground-popup.css, pierzainer_ground/web_job.py. 기존 main/landing 입력 연결을 재사용한다.

pierzainer_ground/ground-link-server.ts

@@ -0,0 +1,60 @@
+import { spawn } from 'node:child_process';
+import { mkdir,writeFile,readFile,readdir } from 'node:fs/promises';
+import { existsSync } from 'node:fs';
+import path from 'node:path';
+import { randomUUID } from 'node:crypto';
+import type { Plugin } from 'vite';
+import { resolvePython,describeSpawnError } from './python-runtime.ts';
+export const GROUND_LINK_API='/__pierzainer/ground-link';
+export function startGroundBat(bat:string,context:string,cwd:string){
+ return spawn(process.env.ComSpec??'cmd.exe',['/d','/s','/c',`""${bat}""`],{cwd,windowsHide:true,windowsVerbatimArguments:true,env:{...process.env,PIERZAINER_GROUND_CONTEXT:context},stdio:'ignore'});
+}
+
+export async function findGroundDrawing(folder:string):Promise<string|undefined>{
+ const matches:string[]=[];
+ const walk=async(dir:string,depth:number)=>{for(const entry of await readdir(dir,{withFileTypes:true})){const file=path.join(dir,entry.name);if(entry.isDirectory()&&depth<2)await walk(file,depth+1);else if(entry.isFile()&&/\.(dwg|dxf)$/i.test(entry.name)&&/종평면|종평|종단|평종면/.test(entry.name))matches.push(file);}};
+ if(folder)await walk(folder,0);const originals=matches.filter(file=>/\.dwg$/i.test(file));return originals.length===1?originals[0]:matches.length===1?matches[0]:undefined;
+}
+export function groundLinkPlugin(root:string):Plugin{
+ const base=path.join(root,'pierzainer_ground'),cache=path.join(base,'data/cache/app-link'),stages=new Map<string,{excel:string;folder:string;name:string}>(),jobs=new Map<string,{output:string;logs:string;state:string}>();
+ const handler=async(req:any,res:any,next:()=>void)=>{
+  const pathname=new URL(req.url??'/','http://localhost').pathname;if(!pathname.startsWith(GROUND_LINK_API+'/'))return next();
+  const reply=(code:number,value:unknown)=>{res.writeHead(code,{'Content-Type':'application/json; charset=utf-8','Cache-Control':'no-store'});res.end(JSON.stringify(value));};
+  const host=req.headers.host??'',address=req.socket.remoteAddress??'';
+  if(req.method!=='POST'||! /^(localhost|127\.0\.0\.1|\[::1\])(?::\d+)?$/i.test(host)||!['127.0.0.1','::1','::ffff:127.0.0.1'].includes(address)||req.headers['x-pierzainer-action']!=='ground-link'||req.headers.origin&&req.headers.origin!==`http://${host}`&&req.headers.origin!==`https://${host}`){reply(403,{error:'이 PC의 Pierzainer에서 실행하세요.'});return;}
+  try{
+   let raw='';for await(const part of req){raw+=part;if(raw.length>280*1024*1024)throw new Error('Excel 파일이 너무 큽니다(최대 20MB).');}const body=JSON.parse(raw||'{}'),action=pathname.slice(GROUND_LINK_API.length+1);
+   if(action==='stage'){
+    if(typeof body.name!=='string'||!body.name.toLowerCase().endsWith('.xlsx')||typeof body.base64!=='string'||!/^[A-Za-z0-9+/]*={0,2}$/.test(body.base64))throw new Error('교각 Excel(.xlsx) 파일을 선택하세요.');
+    const bytes=Buffer.from(body.base64,'base64');if(bytes.length>20*1024*1024||bytes[0]!==80||bytes[1]!==75)throw new Error('유효한 xlsx 파일이 아닙니다.');
+    const id=randomUUID(),dir=path.join(cache,id);await mkdir(dir,{recursive:true});const excel=path.join(dir,'piers.xlsx');await writeFile(excel,bytes);stages.set(id,{excel,name:body.name,folder:typeof body.folder==='string'?body.folder:''});reply(200,{id});return;
+   }
+   if(action==='prepare'){
+    const stage=stages.get(body.stageId);const drawing=stage?.folder?await findGroundDrawing(stage.folder):undefined;reply(200,{drawing:drawing??'',excelSelected:!!stage,excelName:stage?.name??''});return;
+   }
+   if(action==='upload'){
+    if(typeof body.name!=='string'||!/\.(dwg|dxf|xlsx)$/i.test(body.name)||typeof body.base64!=='string'||! /^[A-Za-z0-9+/]*={0,2}$/.test(body.base64))throw new Error('DWG/DXF 또는 Excel을 선택하세요.');
+    const bytes=Buffer.from(body.base64,'base64');if(bytes.length>200*1024*1024)throw new Error('최대 200MB입니다.');const dir=path.join(cache,randomUUID());await mkdir(dir,{recursive:true});const file=path.join(dir,path.basename(body.name));await writeFile(file,bytes);reply(200,{file});return;
+   }
+   if(action==='launch'){
+    const stage=stages.get(body.stageId),drawing=String(body.drawing??''),piers=String(body.excel??stage?.excel??'');
+    const original=stage?.folder?await findGroundDrawing(stage.folder):undefined;
+    const cached=(file:string)=>{const r=path.relative(cache,path.resolve(file));return !!r&&!r.startsWith('..')&&!path.isAbsolute(r);};
+    if(!existsSync(drawing)||!/\.(dwg|dxf)$/i.test(drawing)||drawing!==original&&!cached(drawing))throw new Error('종평면도를 선택하세요.');
+    if(!existsSync(piers)||!/\.xlsx$/i.test(piers)||!cached(piers))throw new Error('교각 Excel을 선택하세요.');
+    const id=randomUUID(),output=path.join(base,'data/output',`app_${id}`),job={output,logs:'',state:'running'};jobs.set(id,job);
+    const python=resolvePython(root);
+    const child=spawn(python,['-B','-u','-X','utf8','-m','pierzainer_ground.web_job',drawing,piers,output],{cwd:base,windowsHide:true,stdio:['ignore','pipe','pipe']});
+    const append=(data:Buffer)=>{job.logs=(job.logs+data.toString('utf8')).slice(-200000);};child.stdout.on('data',append);child.stderr.on('data',append);
+    child.once('error',error=>{job.state='error';job.logs+='\n'+describeSpawnError(error,python);});child.once('close',code=>{job.state=code===0?'done':'error';});reply(200,{id});return;
+   }
+   if(action==='result'){
+    const job=jobs.get(body.id);if(!job)throw new Error('지반 생성 작업을 찾을 수 없습니다.');
+    if(job.state!=='done'){reply(200,{ready:false,state:job.state,logs:job.logs});return;}
+    for(const filename of ['ground_model_3d_with_maps.json','ground_model.json']){const file=path.join(job.output,filename);if(existsSync(file)){const text=await readFile(file,'utf8');JSON.parse(text);reply(200,{ready:true,filename,text,state:job.state,logs:job.logs});return;}}
+    reply(200,{ready:false});return;
+   }reply(404,{error:'지원하지 않는 지반 연동 요청입니다.'});
+  }catch(error){reply(400,{error:(error as Error).message});}
+ };
+ return{name:'pierzainer-ground-link',configureServer(server){server.middlewares.use((req,res,next)=>void handler(req,res,next));},configurePreviewServer(server){server.middlewares.use((req,res,next)=>void handler(req,res,next));}};
+}

pierzainer_ground/ground-link.test.ts

@@ -0,0 +1,11 @@
+import { describe,it,expect } from 'vitest';
+import { mkdir,writeFile } from 'node:fs/promises';
+import path from 'node:path';
+import { randomUUID } from 'node:crypto';
+import { findGroundDrawing } from './ground-link-server';
+const base=path.join(import.meta.dirname,'data/cache/link-tests');
+describe('지반 프로그램 원본 종평면도 연결',()=>{
+ it('Excel 시작은 도면을 임의로 지정하지 않는다',async()=>expect(await findGroundDrawing('')).toBeUndefined());
+ it('폴더의 종평면도 원본 DWG를 선택하고 변환 DXF와 중복하지 않는다',async()=>{const dir=path.join(base,randomUUID());await mkdir(dir,{recursive:true});await writeFile(path.join(dir,'산외교 종평면도.dwg'),'');await writeFile(path.join(dir,'종평면도.dxf'),'');await writeFile(path.join(dir,'받침배치도.dwg'),'');expect(await findGroundDrawing(dir)).toBe(path.join(dir,'산외교 종평면도.dwg'));});
+ it('서로 다른 종평면도 원본이 여럿이면 사용자 선택으로 남긴다',async()=>{const dir=path.join(base,randomUUID());await mkdir(dir,{recursive:true});await writeFile(path.join(dir,'A교 종평면도.dwg'),'');await writeFile(path.join(dir,'B교 종평면도.dwg'),'');expect(await findGroundDrawing(dir)).toBeUndefined();});
+});

pierzainer_ground/ground-link.ts

@@ -0,0 +1,75 @@
+import './ground-popup.css';
+const API='/__pierzainer/ground-link';
+let importGround: ((text: string, name: string) => Promise<void>) | undefined;
+export function registerGroundImporter(importer: (text: string, name: string) => Promise<void>) { importGround = importer; }
+let pending:{file:File;folder?:string}|undefined,staged:Promise<string|undefined>=Promise.resolve(undefined),version=0;
+const request=async(action:string,body:object)=>{const r=await fetch(`${API}/${action}`,{method:'POST',headers:{'Content-Type':'application/json','X-Pierzainer-Action':'ground-link'},body:JSON.stringify(body)});const value=await r.json();if(!r.ok)throw new Error(value.error??'지반 프로그램 연동 실패');return value;};
+const base64=(file:File)=>new Promise<string>((resolve,reject)=>{const reader=new FileReader();reader.onerror=()=>reject(new Error('Excel 파일을 읽지 못했습니다.'));reader.onload=()=>resolve(String(reader.result).split(',')[1]);reader.readAsDataURL(file);});
+document.addEventListener('change',event=>{const input=event.target as HTMLInputElement;if(input.id==='file'&&input.files?.[0])pending={file:input.files[0]};if(input.id==='project-file'){pending=undefined;version++;staged=Promise.resolve(undefined);}},true);
+window.addEventListener('pierzainer:ground-source',(event:Event)=>{const d=(event as CustomEvent).detail;pending={file:new File([d.bytes],d.name,{type:'application/vnd.openxmlformats-officedocument.spreadsheetml.sheet'}),folder:d.folder};});
+document.addEventListener('click',event=>{if(!(event.target as Element).closest('#dlg-apply')||!pending)return;const source=pending;pending=undefined;version++;staged=(async()=>{const data=await request('stage',{name:source.file.name,base64:await base64(source.file),folder:source.folder});return data.id as string;})();staged.catch(()=>{});},true);
+
+let opening=false,running=false,launchSerial=0;
+let popup:HTMLDialogElement;
+window.addEventListener('pierzainer:project-changed',()=>{
+ version++;launchSerial++;running=false;opening=false;
+ if(popup){popup.close();popup.querySelector<HTMLElement>('[data-status]')!.textContent='프로젝트가 변경되어 이전 작업의 결과를 연결하지 않습니다.';}
+});
+function getPopup(){
+ if(popup)return popup;
+ popup=document.createElement('dialog');popup.className='ground-popup';popup.setAttribute('aria-labelledby','ground-popup-title');
+ popup.innerHTML=`<header><div><small>GROUND MODEL</small><h2 id="ground-popup-title">지반 모델 생성</h2></div><button type="button" data-close aria-label="닫기">×</button></header>
+ <p>종평면도와 교각 Excel로 지반면·위성사진·2D 지도 JSON을 생성합니다.</p>
+ <label for="ground-drawing-file">종평면도 DXF / DWG</label><div class="ground-file-row"><span data-drawing-name></span><button type="button" data-pick="drawing">종평면도 선택</button><input id="ground-drawing-file" data-drawing type="file" accept=".dwg,.dxf" hidden></div>
+ <label for="ground-excel-file">교각 Excel</label><div class="ground-file-row"><span data-excel-name></span><button type="button" data-pick="excel">Excel 선택</button><input id="ground-excel-file" data-excel type="file" accept=".xlsx" hidden></div>
+ <p class="ground-popup-note">기존 생성 엔진을 사용합니다. 지도 다운로드에는 인터넷 연결이 필요합니다.</p>
+ <button type="button" data-run>지반 생성</button><p data-status role="status" aria-live="polite"></p><pre data-logs tabindex="0" aria-label="생성 진행 로그"></pre><footer><button type="button" data-close>닫기</button></footer>`;
+ popup.querySelectorAll<HTMLButtonElement>('[data-pick]').forEach(button=>button.addEventListener('click',()=>popup.querySelector<HTMLInputElement>(`[data-${button.dataset.pick}]`)!.click()));
+ popup.querySelectorAll('[data-close]').forEach(button=>button.addEventListener('click',()=>popup.close()));document.body.append(popup);return popup;
+}
+window.addEventListener('pierzainer:open-ground',async()=>{
+ if(opening&&popup?.open)return;if(running&&popup){popup.showModal();opening=true;return;}opening=true;
+ const dialog=getPopup(),ticket=++launchSerial,snapshot=version;
+ const status=dialog.querySelector<HTMLElement>('[data-status]')!,logs=dialog.querySelector<HTMLElement>('[data-logs]')!,run=dialog.querySelector<HTMLButtonElement>('[data-run]')!;
+ const drawingInput=dialog.querySelector<HTMLInputElement>('[data-drawing]')!,excelInput=dialog.querySelector<HTMLInputElement>('[data-excel]')!;
+ drawingInput.value='';excelInput.value='';drawingInput.disabled=excelInput.disabled=false;dialog.querySelector('[data-drawing-name]')!.textContent='파일 확인 중…';dialog.querySelector('[data-excel-name]')!.textContent='파일 확인 중…';run.disabled=true;status.textContent='입력 파일 확인 중…';logs.textContent='';dialog.showModal();
+ let stageId:string|undefined,drawing='';
+ try{stageId=await staged;const prepared=await request('prepare',{stageId});if(snapshot!==version||ticket!==launchSerial)return;drawing=prepared.drawing;
+ const display=(kind:string,name:string,connected:boolean)=>{dialog.querySelector(`[data-${kind}-name]`)!.textContent=name;dialog.querySelector(`[data-pick="${kind}"]`)!.textContent=connected?'파일 변경':kind==='drawing'?'종평면도 선택':'Excel 선택';};
+ const drawingName=drawing.split(/[\\/]/).pop()||'종평면도를 선택하세요.';const excelName=prepared.excelName||'교각 Excel을 선택하세요.';
+ display('drawing',drawingName,!!drawing);display('excel',excelName,prepared.excelSelected);
+ drawingInput.onchange=()=>display('drawing',drawingInput.files?.[0]?.name||drawingName,!!drawingInput.files?.[0]||!!drawing);
+ excelInput.onchange=()=>display('excel',excelInput.files?.[0]?.name||excelName,!!excelInput.files?.[0]||prepared.excelSelected);status.textContent='입력을 확인하고 지반 생성을 누르세요.';run.disabled=false;
+ }catch(error){if(snapshot!==version||ticket!==launchSerial)return;status.textContent=(error as Error).message;opening=false;return;}
+ run.onclick=async()=>{
+  if(snapshot!==version){status.textContent='프로젝트가 변경되었습니다. 닫고 다시 열어 주세요.';return;}
+  run.disabled=true;drawingInput.disabled=excelInput.disabled=true;
+  try{
+   const upload=async(file:File)=>(await request('upload',{name:file.name,base64:await base64(file)})).file as string;
+   status.textContent='입력 파일 전달 중…';const chosen=drawingInput.files?.[0],excel=excelInput.files?.[0];
+   if(chosen)drawing=await upload(chosen);if(!drawing)throw new Error('종평면도를 선택하세요.');
+   const excelPath=excel?await upload(excel):undefined;
+   if(snapshot!==version||ticket!==launchSerial)return;
+   if(!excelPath&&!stageId)throw new Error('교각 Excel을 선택하세요.');
+   const job=await request('launch',{stageId,drawing,excel:excelPath});if(snapshot!==version||ticket!==launchSerial)return;running=true;status.textContent='지반·지도 생성 중… 닫아도 생성은 계속됩니다.';
+   const deadline=Date.now()+30*60*1000;
+   const poll=async()=>{
+    if(snapshot!==version||ticket!==launchSerial)return;
+    try{
+     const result=await request('result',{id:job.id});logs.textContent=result.logs??'';logs.scrollTop=logs.scrollHeight;
+     if(snapshot!==version||ticket!==launchSerial)return;
+     if(result.state==='error')throw new Error('지반 생성 실패. 진행 로그를 확인하세요.');
+     if(result.ready){
+      if(!importGround)throw new Error('프로젝트 지반모델 불러오기를 사용할 수 없습니다.');
+      await importGround(result.text,result.filename);
+      status.textContent='지반 생성 완료. 프로젝트 공통 모델로 불러왔습니다. 관리창에서 비교 후 적용하세요.';
+      running=false;run.disabled=false;drawingInput.disabled=excelInput.disabled=false;return;
+     }
+     if(Date.now()>deadline)throw new Error('응답 대기 시간이 지났습니다. 결과 폴더를 확인하세요.');setTimeout(poll,2000);
+    }catch(error){if(snapshot!==version||ticket!==launchSerial)return;status.textContent=(error as Error).message;running=false;run.disabled=false;drawingInput.disabled=excelInput.disabled=false;}
+   };setTimeout(poll,1000);
+  }catch(error){if(snapshot!==version||ticket!==launchSerial)return;status.textContent=(error as Error).message;running=false;run.disabled=false;drawingInput.disabled=excelInput.disabled=false;}
+ };
+});
+// Closing hides the panel; the current job and its polling continue.
+document.addEventListener('close',event=>{if(event.target===popup)opening=false;},true);

pierzainer_ground/ground-popup.css

@@ -0,0 +1,5 @@
+.ground-popup{box-sizing:border-box;width:min(860px,94vw);max-height:90dvh;overflow:auto;border:1px solid #d2dfed;border-radius:16px;padding:26px;background:#fff;color:#14263d;box-shadow:0 24px 90px #10263f40;font-family:inherit}
+.ground-popup::backdrop{background:#10263f70;backdrop-filter:blur(3px)}
+.ground-popup header{display:flex;align-items:center;justify-content:space-between}.ground-popup h2{margin:6px 0 16px;font-size:23px}.ground-popup small{color:#087fcb;letter-spacing:.14em}
+.ground-popup button{font:inherit;cursor:pointer;padding:9px 18px;border-radius:7px;border:1px solid #cbd9e8;background:#f2f7fc;color:#14263d}.ground-popup button:disabled{opacity:.5;cursor:wait}.ground-popup [data-run]{background:#087fcb;color:white;border-color:#087fcb;margin-top:18px}.ground-popup label{display:block;font-weight:600;margin-top:20px}.ground-popup input{display:block;margin-top:9px;max-width:100%;font:inherit}.ground-popup [data-drawing-name],.ground-popup [data-excel-name]{overflow-wrap:anywhere;font-size:12px;color:#64748b;margin-top:7px}.ground-popup-note{font-size:12px;color:#64748b}.ground-popup pre{height:210px;overflow:auto;white-space:pre-wrap;overflow-wrap:anywhere;background:#f5f8fc;border:1px solid #dce6f0;border-radius:8px;padding:12px;font-size:12px}.ground-popup footer{text-align:right}.ground-popup [data-status]{font-size:13px}
+.ground-popup .ground-file-row{display:flex;align-items:center;gap:14px;margin-top:10px;padding:12px 14px;border:1px solid #dce6f0;border-radius:8px;background:#f8fafc}.ground-popup .ground-file-row span{flex:1;min-width:0;overflow-wrap:anywhere;font-size:14px;color:#14263d;margin:0}.ground-popup .ground-file-row button{flex-shrink:0}.ground-popup input[hidden]{display:none}

pierzainer_ground/pierzainer_ground/app.py

@@ -1,6 +1,7 @@
 """Two-file, AI-free ground-model generator."""
 from pathlib import Path
 import os
+import json
 import queue
 import re
 import threading
@@ -10,16 +11,34 @@ from tkinter import filedialog, messagebox, scrolledtext, ttk
 from .drawing_job import ROOT, build_from_files
 
 
+def read_launch_context():
+    filename=os.environ.get('PIERZAINER_GROUND_CONTEXT')
+    if not filename:return {}
+    file=Path(filename).resolve()
+    if not file.is_relative_to((ROOT/'data/cache').resolve()):raise ValueError('지반 연동 설정 경로가 올바르지 않습니다.')
+    data=json.loads(file.read_text(encoding='utf-8'))
+    for key,extensions in [('drawing',('.dwg','.dxf')),('piers',('.xlsx',))]:
+        value=data.get(key,'')
+        if value and (not Path(value).is_file() or Path(value).suffix.lower() not in extensions):raise ValueError(f'{key} 입력 파일이 없습니다.')
+    if data.get('output') and not Path(data['output']).resolve().is_relative_to((ROOT/'data/output').resolve()):raise ValueError('결과 폴더는 지반 프로젝트 내부여야 합니다.')
+    if data.get('ready_file') and not Path(data['ready_file']).resolve().is_relative_to((ROOT/'data/cache').resolve()):raise ValueError('실행 확인 경로가 올바르지 않습니다.')
+    return data
+
+
 class GroundModelApp(tk.Tk):
-    def __init__(self):
+    def __init__(self,context=None):
         super().__init__()
         self.title('Pierzainer 지반모델링 · 도면 + Excel 자동 생성 v2')
         self.geometry('1000x640');self.minsize(850,540)
-        self.drawing=tk.StringVar();self.piers=tk.StringVar()
+        context=context or {};self._linked_output=context.get('output')
+        self.drawing=tk.StringVar(value=context.get('drawing',''));self.piers=tk.StringVar(value=context.get('piers',''))
         self.output=tk.StringVar(value=str(ROOT/'data/output'))
         self.status=tk.StringVar(value='종평면도와 교각 Excel을 선택하세요')
         self.messages=queue.Queue();self.busy=False
         self._build();self.after(100,self._poll)
+        if self._linked_output or self.drawing.get():self._output_folder()
+        if context.get('message'):self.status.set(context['message'])
+        if context.get('ready_file'):Path(context['ready_file']).write_text('ready',encoding='utf-8')
 
     def _build(self):
         main=ttk.Frame(self,padding=16);main.pack(fill='both',expand=True)
@@ -28,12 +47,12 @@ class GroundModelApp(tk.Tk):
         for row,key,label in ((1,'drawing','① 종평면도 DXF/DWG'),(2,'piers','② 교각 Excel')):
             ttk.Label(main,text=label).grid(row=row,column=0,sticky='w',pady=6)
             ttk.Entry(main,textvariable=getattr(self,key)).grid(row=row,column=1,sticky='ew',padx=10)
-            ttk.Button(main,text='찾기',command=lambda k=key:self._browse(k)).grid(row=row,column=2)
+            ttk.Button(main,text='종평면도 선택하기' if key=='drawing' else 'Excel 선택하기',command=lambda k=key:self._browse(k)).grid(row=row,column=2)
         ttk.Label(main,text='결과 저장 위치').grid(row=3,column=0,sticky='w',pady=6)
         ttk.Entry(main,textvariable=self.output,state='readonly').grid(row=3,column=1,columnspan=2,sticky='ew',padx=(10,0))
         ttk.Label(main,text='두 파일만 선택하면 지반면 + 위성사진 + 2D 지도를 생성합니다. AI 연결 없이 OSM/Esri 인터넷 지도를 사용합니다.\n원본에 좌표계 표기가 없으면 프로젝트 기본 EPSG:5186을 적용하고, 좌표계 가정으로 표시합니다.',foreground='#4f6070',wraplength=920).grid(row=4,column=0,columnspan=3,sticky='w',pady=12)
         buttons=ttk.Frame(main);buttons.grid(row=5,column=0,columnspan=3,sticky='ew',pady=6)
-        self.run_button=ttk.Button(buttons,text='지반 모델 자동 생성',command=self._start_run);self.run_button.pack(side='left')
+        self.run_button=ttk.Button(buttons,text='지반 생성',command=self._start_run);self.run_button.pack(side='left')
         ttk.Button(buttons,text='결과 폴더 열기',command=self._open_out).pack(side='left',padx=10)
         ttk.Label(main,textvariable=self.status).grid(row=6,column=0,columnspan=3,sticky='w',pady=6)
         self.log=scrolledtext.ScrolledText(main,height=18,font=('Consolas',10))
@@ -52,7 +71,7 @@ class GroundModelApp(tk.Tk):
 
     def _output_folder(self):
         name=re.sub(r'[^\w.-]+','_',Path(self.drawing.get()).stem).strip('.') or 'new_drawing'
-        self.output.set(str(ROOT/'data/output'/('drawing_'+name)))
+        self.output.set(self._linked_output or str(ROOT/'data/output'/('drawing_'+name)))
 
     def _open_out(self):
         path=Path(self.output.get())
@@ -93,7 +112,7 @@ class GroundModelApp(tk.Tk):
 
 
 def main():
-    app=GroundModelApp();app.mainloop();return 0
+    app=GroundModelApp(read_launch_context());app.mainloop();return 0
 
 
 if __name__=='__main__':raise SystemExit(main())

pierzainer_ground/pierzainer_ground/dxf_terrain.py

@@ -29,6 +29,18 @@ class TerrainData:
     stats: dict = field(default_factory=dict)
 
 
+def _exe_path_arg(exe: str, file: Path) -> str:
+    """Windows .exe를 WSL/Linux에서 부를 때 경로를 Windows 형식으로 바꾼다."""
+    import os
+    if os.name == "nt" or not exe.lower().endswith(".exe"):
+        return str(file)
+    wslpath = shutil.which("wslpath")
+    if not wslpath:
+        return str(file)
+    result = subprocess.run([wslpath, "-w", str(Path(file).resolve())], check=False, capture_output=True, text=True)
+    return result.stdout.strip() if result.returncode == 0 and result.stdout.strip() else str(file)
+
+
 def convert_dwg_to_dxf(dwg: str | Path, out_dir: str | Path) -> Path:
     """LibreDWG의 dwg2dxf 로 DWG를 DXF로 바꾼다."""
     exe = shutil.which("dwg2dxf")
@@ -55,7 +67,7 @@ def convert_dwg_to_dxf(dwg: str | Path, out_dir: str | Path) -> Path:
     temporary=out.with_name(out.stem+'.converting.dxf')
     try:
         temporary.unlink(missing_ok=True)
-        result=subprocess.run([exe, "-y", "-o", str(temporary), str(dwg)], check=False, capture_output=True, timeout=300)
+        result=subprocess.run([exe, "-y", "-o", _exe_path_arg(exe,temporary), _exe_path_arg(exe,dwg)], check=False, capture_output=True, timeout=300)
         if result.returncode!=0 or not temporary.is_file() or temporary.stat().st_size==0:
             raise RuntimeError(f"DWG 변환에 실패했습니다: {dwg}")
         temporary.replace(out)

pierzainer_ground/pierzainer_ground/survey_terrain.py

@@ -17,6 +17,45 @@ from pierzainer_ground.dtm import DTM
 ROOT=Path(__file__).resolve().parent.parent
 
 
+def reject_height_outliers(entities, radius=15.0, max_dz=10.0, min_levels=3, same=1e-3):
+    """Drop height entities that disagree with the surrounding surveyed surface.
+
+    Drawings often keep plan symbols, hatching or design outlines at a stray
+    constant elevation (e.g. EL 5.624 or -112.719 among 20-40 m contours).
+    Each entity's height is compared with the median of the *distinct* nearby
+    height levels (each level votes once, so a dense stray group of short
+    ticks cannot outvote real contours); the worst height level is removed
+    first and the test is repeated, so a large stray group cannot mask itself.
+    Sparse areas fall back to a 3x search radius.
+    Heights within `same` (1 mm) form one level, absorbing CAD float noise.
+    Returns (keep flags, [(index, z, deviation)]).
+    """
+    from scipy.spatial import cKDTree
+    n=len(entities)
+    keep=np.ones(n,bool)
+    if n<3:return keep.tolist(),[]
+    xy=np.vstack([e[0] for e in entities]);owner=np.concatenate([np.full(len(e[0]),i) for i,e in enumerate(entities)])
+    zs=np.array([float(e[1]) for e in entities]);sample_z=zs[owner]
+    tree=cKDTree(xy);rejected=[]
+    near=lambda e,r:np.unique(np.concatenate(tree.query_ball_point(e[0],r)) if len(e[0]) else np.array([],int)).astype(int)
+    neighbours=[near(e,radius) for e in entities];wide=[near(e,3*radius) for e in entities]
+    for _ in range(64):
+        alive=keep[owner];dev=np.zeros(n)
+        for i in np.flatnonzero(keep):
+            nb=neighbours[i];nb=nb[alive[nb]&(np.abs(sample_z[nb]-zs[i])>same)]
+            if len(np.unique(np.round(sample_z[nb]/same)))<min_levels:nb=wide[i];nb=nb[alive[nb]&(np.abs(sample_z[nb]-zs[i])>same)]
+            levels=np.unique(np.round(sample_z[nb]/same))*same
+            # Peaks/pits legitimately exceed the median; require the height to
+            # lie clearly outside the whole local range as well.
+            outside=max(levels[0]-zs[i],zs[i]-levels[-1]) if len(levels) else 0.0
+            if len(levels)>=min_levels and outside>max_dz/2:dev[i]=zs[i]-float(np.median(levels))
+        worst=int(np.argmax(np.abs(dev)))
+        if abs(dev[worst])<=max_dz:break
+        group=np.flatnonzero(keep&(np.abs(zs-zs[worst])<=same)&(np.abs(dev)>max_dz))
+        keep[group]=False;rejected.extend((int(i),float(zs[i]),float(dev[i])) for i in group)
+    return keep.tolist(),rejected
+
+
 def read_survey_block(source, project, doc=None):
     """Read actual height geometry in an explicitly selected survey block."""
     if doc is None:
@@ -54,9 +93,11 @@ def read_survey_block(source, project, doc=None):
                 if e.is_closed: xy.append(xy[0])
                 contours.append((xy,float(a[0,2]),e.dxf.handle)); types['constant_height_polylines']+=1
     # POINT entities have priority over densified contour vertices.
-    for xy,z,handle in contours:
-        samples=_densify(xy,project['contour_step_m'])
-        points.extend((x,y,z) for x,y in samples)
+    sampled=[(np.asarray(_densify(xy,project['contour_step_m']),dtype=float).reshape(-1,2),z) for xy,z,handle in contours]
+    sampled=[(np.array([[x,y]]),z) for x,y,z in points]+sampled
+    keep,rejected=reject_height_outliers(sampled,project.get('outlier_radius_m',15.0),project.get('outlier_dz_m',10.0)) if project.get('reject_outliers',True) else ([True]*len(sampled),[])
+    if rejected:types['rejected_height_outliers']=len(rejected)
+    points=[(x,y,z) for (xy,z),ok in zip(sampled,keep) if ok for x,y in xy]
     a=np.array(points,dtype=float)
     if len(a)<3:
         raise ValueError('선택한 블록에서 실제 표고점·등고선을 3점 이상 읽지 못했습니다.')

pierzainer_ground/pierzainer_ground/web_job.py

@@ -0,0 +1,10 @@
+"""Run the existing generator for the in-app dialog, without a native window."""
+import sys
+from .drawing_job import build_from_files
+
+if __name__ == '__main__':
+    try:
+        build_from_files(sys.argv[1], sys.argv[2], lambda message: print(message, flush=True), output=sys.argv[3])
+    except Exception as error:
+        print(str(error), file=sys.stderr, flush=True)
+        sys.exit(1)

pierzainer_ground/python-runtime.test.ts

@@ -0,0 +1,26 @@
+import { describe,it,expect } from 'vitest';
+import path from 'node:path';
+import { resolvePython,describeSpawnError } from './python-runtime';
+
+const root='/repo',venv=path.join(root,'pierzainer_ground','.venv');
+const has=(...files:string[])=>(file:string)=>files.includes(file);
+
+describe('resolvePython',()=>{
+ it('uses the Windows venv on win32',()=>{
+  const exe=path.join(venv,'Scripts','python.exe');
+  expect(resolvePython(root,'win32',has(exe),{})).toBe(exe);
+ });
+ it('uses the POSIX venv on Linux/WSL',()=>{
+  const bin=path.join(venv,'bin','python');
+  expect(resolvePython(root,'linux',has(bin),{})).toBe(bin);
+ });
+ it('falls back to PIERZAINER_PYTHON, then python3 / python',()=>{
+  expect(resolvePython(root,'linux',has(),{PIERZAINER_PYTHON:'/opt/py'})).toBe('/opt/py');
+  expect(resolvePython(root,'linux',has(),{})).toBe('python3');
+  expect(resolvePython(root,'win32',has(),{})).toBe('python');
+ });
+ it('explains ENOENT instead of the raw spawn message',()=>{
+  const error=Object.assign(new Error('spawn python ENOENT'),{code:'ENOENT'});
+  expect(describeSpawnError(error,'python')).toContain('Python 실행 파일을 찾지 못했습니다');
+ });
+});

pierzainer_ground/python-runtime.ts

@@ -0,0 +1,20 @@
+import { existsSync } from 'node:fs';
+import path from 'node:path';
+
+/**
+ * Python used by the local dev-server tools (ground engine, quantity workbook, DWG export).
+ * Order: Windows venv → POSIX venv (WSL/Linux) → PIERZAINER_PYTHON → python3/python on PATH.
+ */
+export function resolvePython(root:string,platform:NodeJS.Platform=process.platform,exists:(file:string)=>boolean=existsSync,env:NodeJS.ProcessEnv=process.env):string{
+ const venv=path.join(root,'pierzainer_ground','.venv');
+ const candidates=platform==='win32'?[path.join(venv,'Scripts','python.exe')]:[path.join(venv,'bin','python'),path.join(venv,'Scripts','python.exe')];
+ const found=candidates.find(file=>exists(file));if(found)return found;
+ if(env.PIERZAINER_PYTHON)return env.PIERZAINER_PYTHON;
+ return platform==='win32'?'python':'python3';
+}
+
+/** Human-readable reason for a failed spawn (ENOENT otherwise shows only "spawn python ENOENT"). */
+export function describeSpawnError(error:NodeJS.ErrnoException,python:string):string{
+ if(error.code==='ENOENT')return `Python 실행 파일을 찾지 못했습니다(${python}). pierzainer_ground/.venv를 만들고 requirements.txt를 설치하거나 PIERZAINER_PYTHON을 지정하세요.`;
+ return error.message;
+}

pierzainer_ground/tests/test_app_link.py

@@ -0,0 +1,29 @@
+import os,json,unittest,uuid
+from pathlib import Path
+from unittest.mock import patch
+from pierzainer_ground.app import read_launch_context,GroundModelApp,ROOT
+
+class AppLinkTest(unittest.TestCase):
+    def setUp(self):
+        self.cache=ROOT/'data/cache'/('gui_link_test_'+uuid.uuid4().hex);self.cache.mkdir(parents=True)
+        self.excel=ROOT.parent/'도면추출/samples/샘플01_산외교_교각입력데이터.xlsx'
+        self.drawing=ROOT/'data/input/sanwoe/02.종평면도(울산)_2017.0619-수정.dwg'
+    def config(self,drawing=''):
+        return dict(piers=str(self.excel),drawing=drawing,output=str(ROOT/'data/output'/self.cache.name),ready_file=str(self.cache/'ready'))
+    def test_excel_has_empty_drawing_and_keeps_workbook(self):
+        file=self.cache/'context.json';file.write_text(json.dumps(self.config()),encoding='utf-8')
+        with patch.dict(os.environ,PIERZAINER_GROUND_CONTEXT=str(file)):
+            context=read_launch_context();self.assertEqual(context['drawing'],'');self.assertEqual(context['piers'],str(self.excel))
+    def test_native_gui_prefills_both_and_calls_existing_pipeline(self):
+        context=self.config(str(self.drawing));app=GroundModelApp(context);app.withdraw()
+        try:
+            self.assertEqual(app.drawing.get(),str(self.drawing));self.assertEqual(app.piers.get(),str(self.excel));self.assertEqual(app.output.get(),context['output']);self.assertEqual(app.run_button['text'],'지반 생성')
+            with patch('pierzainer_ground.app.build_from_files',return_value={'map_status':{'status':'mapped'}}) as run:
+                app._start_run();kind,message=app.messages.get(timeout=3);self.assertEqual(kind,'done');self.assertEqual(run.call_args.args[:2],(str(self.drawing),str(self.excel)));self.assertEqual(run.call_args.kwargs['output'],context['output'])
+        finally:
+            for token in app.tk.call('after','info'):app.after_cancel(token)
+            app.destroy()
+    def test_bad_output_is_rejected(self):
+        context=self.config();context['output']=str(ROOT.parent);file=self.cache/'context.json';file.write_text(json.dumps(context),encoding='utf-8')
+        with patch.dict(os.environ,PIERZAINER_GROUND_CONTEXT=str(file)),self.assertRaises(ValueError):read_launch_context()
+if __name__=='__main__':unittest.main()

pierzainer_ground/tests/test_survey_polyline.py

@@ -25,4 +25,23 @@ class SurveyPolylineTests(unittest.TestCase):
         doc=ezdxf.new();doc.modelspace().add_polyline3d([(1,1,20),(2,2,30),(3,3,40)])
         with self.assertRaises(ValueError):read_survey_block(Path('unused.dxf'),self.options(),doc=doc)
 
+    def contours(self,msp,levels):
+        for k,z in enumerate(levels):
+            msp.add_lwpolyline([(0,10*k),(200,10*k)],dxfattribs={'elevation':z})
+
+    def test_stray_constant_height_symbols_are_rejected(self):
+        # Ungok case: dense short ticks at EL 5.624 and a few at -112.719 among 20-40 m contours.
+        doc=ezdxf.new();msp=doc.modelspace();self.contours(msp,[28,29,30,31,32,33])
+        for i in range(60):msp.add_lwpolyline([(40+2*i,20),(40+2*i,22)],dxfattribs={'elevation':5.624})
+        for i in range(4):msp.add_lwpolyline([(100+i,25),(100+i,27)],dxfattribs={'elevation':-112.719})
+        points,counts,_=read_survey_block(Path('unused.dxf'),self.options(),doc=doc)
+        self.assertEqual(counts['rejected_height_outliers'],64)
+        self.assertGreaterEqual(points[:,2].min(),28)
+
+    def test_real_peak_above_contours_is_kept(self):
+        doc=ezdxf.new();msp=doc.modelspace();self.contours(msp,[70,72,74,76,78,80])
+        msp.add_lwpolyline([(100,25),(100,27)],dxfattribs={'elevation':84})
+        points,counts,_=read_survey_block(Path('unused.dxf'),self.options(),doc=doc)
+        self.assertNotIn('rejected_height_outliers',counts);self.assertEqual(points[:,2].max(),84)
+
 if __name__=='__main__':unittest.main()

project_data/03_prj_json/sample01.pzr.json

@@ -0,0 +1 @@
+{"schemaVersion":1,"project":{"name":"샘플 01 · 산외교","bridge":"산외교","client":"","author":"","crs":"EPSG:5187","memo":"도면추출 연동 샘플 + 원도면 지반. 설계 지반고 유지. 지도 CRS는 원자료 확인이 필요한 가정(inferred_location_checked)."},"source":{"fileName":"샘플01_산외교_교각입력데이터.xlsx","sheets":["Pier","IP","Bearing"]},"piers":[{"id":"P1","input":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"T형","copingTopEl":71.0632,"footingBottomEl":42.763,"groundEl":52.099,"foundationType":"직접기초","pileLengthMm":0,"copingWidthMm":4000,"copingLengthMm":12500,"columnCount":1,"ips":[{"name":"IP1","x":180993.7987,"y":324479.775,"angleDeg":0},{"name":"IP2","x":180993.0547,"y":324478.3023,"angleDeg":0},{"name":"IP3","x":180988.2522,"y":324468.7966,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":180991.8227,"y":324477.5242,"z":71.4178,"azimuthDeg":296.79913888888893,"row":"전열"},{"no":2,"x":180988.9134,"y":324471.7116,"z":71.2882,"azimuthDeg":296.7994166666667,"row":"전열"},{"no":3,"x":180993.2484,"y":324476.8038,"z":71.4401,"azimuthDeg":296.81624999999997,"row":"후열"},{"no":4,"x":180990.2925,"y":324471.0147,"z":71.3096,"azimuthDeg":296.81597222222223,"row":"후열"}],"bearingAzimuthFrame":"model-xy"},"defaults":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"T형","copingTopEl":71.0632,"footingBottomEl":42.763,"groundEl":52.099,"foundationType":"직접기초","pileLengthMm":0,"copingWidthMm":4000,"copingLengthMm":12500,"columnCount":1,"ips":[{"name":"IP1","x":180993.7987,"y":324479.775,"angleDeg":0},{"name":"IP2","x":180993.0547,"y":324478.3023,"angleDeg":0},{"name":"IP3","x":180988.2522,"y":324468.7966,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":180991.8227,"y":324477.5242,"z":71.4178,"azimuthDeg":296.79913888888893,"row":"전열"},{"no":2,"x":180988.9134,"y":324471.7116,"z":71.2882,"azimuthDeg":296.7994166666667,"row":"전열"},{"no":3,"x":180993.2484,"y":324476.8038,"z":71.4401,"azimuthDeg":296.81624999999997,"row":"후열"},{"no":4,"x":180990.2925,"y":324471.0147,"z":71.3096,"azimuthDeg":296.81597222222223,"row":"후열"}],"bearingAzimuthFrame":"model-xy"},"draft":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"T형","copingTopEl":71.0632,"footingBottomEl":42.763,"groundEl":52.099,"foundationType":"직접기초","pileLengthMm":0,"copingWidthMm":4000,"copingLengthMm":12500,"columnCount":1,"ips":[{"name":"IP1","x":180993.7987,"y":324479.775,"angleDeg":0},{"name":"IP2","x":180993.0547,"y":324478.3023,"angleDeg":0},{"name":"IP3","x":180988.2522,"y":324468.7966,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":180991.8227,"y":324477.5242,"z":71.4178,"azimuthDeg":296.79913888888893,"row":"전열"},{"no":2,"x":180988.9134,"y":324471.7116,"z":71.2882,"azimuthDeg":296.7994166666667,"row":"전열"},{"no":3,"x":180993.2484,"y":324476.8038,"z":71.4401,"azimuthDeg":296.81624999999997,"row":"후열"},{"no":4,"x":180990.2925,"y":324471.0147,"z":71.3096,"azimuthDeg":296.81597222222223,"row":"후열"}],"bearingAzimuthFrame":"model-xy"}},{"id":"P2","input":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P2","sheet":"Pier","type":"T형","copingTopEl":71.9164,"footingBottomEl":38.916,"groundEl":41.319,"foundationType":"말뚝기초","pileLengthMm":7000,"copingWidthMm":4000,"copingLengthMm":12500,"columnCount":1,"ips":[{"name":"IP1","x":181033.8891,"y":324459.3055,"angleDeg":0},{"name":"IP2","x":181033.1327,"y":324457.8391,"angleDeg":0},{"name":"IP3","x":181028.2505,"y":324448.3741,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":181031.8943,"y":324457.0714,"z":72.2629,"azimuthDeg":297.2810833333333,"row":"전열"},{"no":2,"x":181028.9384,"y":324451.2823,"z":72.1334,"azimuthDeg":297.2813611111111,"row":"전열"},{"no":3,"x":181033.3136,"y":324456.3392,"z":72.2932,"azimuthDeg":297.29819444444445,"row":"후열"},{"no":4,"x":181030.3037,"y":324450.578,"z":72.1626,"azimuthDeg":297.29783333333336,Line truncated

project_data/03_prj_json/sample02.pzr.json

@@ -0,0 +1 @@
+{"schemaVersion":1,"project":{"name":"샘플 02 · 운곡교","bridge":"운곡교","client":"","author":"","crs":"EPSG:5186","memo":"도면추출 연동 샘플 + 원도면 지반. 설계 지반고 유지. 지도 CRS는 원자료 확인이 필요한 가정(project_default_not_source_verified)."},"source":{"fileName":"샘플02_운곡교_교각입력데이터.xlsx","sheets":["Pier","IP","Bearing"]},"piers":[{"id":"P1","input":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"T형","copingTopEl":43.411,"footingBottomEl":26.208,"groundEl":28.931,"foundationType":"말뚝기초","pileLengthMm":24400,"copingWidthMm":3500,"copingLengthMm":12500,"columnCount":1,"ips":[{"name":"IP1","x":179132.091213,"y":259866.694501,"angleDeg":0},{"name":"IP2","x":179144.095968,"y":259864.658395,"angleDeg":0},{"name":"IP3","x":179144.086088,"y":259864.66007,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":179132.9863,"y":259865.8348,"z":43.625,"azimuthDeg":14.051138888888886,"row":"전열"},{"no":2,"x":179135.4565,"y":259865.4158,"z":43.697,"azimuthDeg":14.046083333333343,"row":"전열"},{"no":3,"x":179137.9267,"y":259864.9969,"z":43.768,"azimuthDeg":14.041055555555545,"row":"전열"},{"no":4,"x":179140.3968,"y":259864.578,"z":43.84,"azimuthDeg":14.036000000000001,"row":"전열"},{"no":5,"x":179142.867,"y":259864.1591,"z":43.912,"azimuthDeg":14.031000000000006,"row":"전열"},{"no":6,"x":179133.2876,"y":259867.0998,"z":43.6,"azimuthDeg":12.74124999999998,"row":"후열"},{"no":7,"x":179135.7577,"y":259866.6809,"z":43.672,"azimuthDeg":12.737694444444458,"row":"후열"},{"no":8,"x":179138.2278,"y":259866.262,"z":43.744,"azimuthDeg":12.734138888888879,"row":"후열"},{"no":9,"x":179140.6978,"y":259865.8431,"z":43.816,"azimuthDeg":12.730611111111102,"row":"후열"},{"no":10,"x":179143.1679,"y":259865.4242,"z":43.887,"azimuthDeg":12.72705555555558,"row":"후열"}],"bearingAzimuthFrame":"model-xy"},"defaults":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"T형","copingTopEl":43.411,"footingBottomEl":26.208,"groundEl":28.931,"foundationType":"말뚝기초","pileLengthMm":24400,"copingWidthMm":3500,"copingLengthMm":12500,"columnCount":1,"ips":[{"name":"IP1","x":179132.091213,"y":259866.694501,"angleDeg":0},{"name":"IP2","x":179144.095968,"y":259864.658395,"angleDeg":0},{"name":"IP3","x":179144.086088,"y":259864.66007,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":179132.9863,"y":259865.8348,"z":43.625,"azimuthDeg":14.051138888888886,"row":"전열"},{"no":2,"x":179135.4565,"y":259865.4158,"z":43.697,"azimuthDeg":14.046083333333343,"row":"전열"},{"no":3,"x":179137.9267,"y":259864.9969,"z":43.768,"azimuthDeg":14.041055555555545,"row":"전열"},{"no":4,"x":179140.3968,"y":259864.578,"z":43.84,"azimuthDeg":14.036000000000001,"row":"전열"},{"no":5,"x":179142.867,"y":259864.1591,"z":43.912,"azimuthDeg":14.031000000000006,"row":"전열"},{"no":6,"x":179133.2876,"y":259867.0998,"z":43.6,"azimuthDeg":12.74124999999998,"row":"후열"},{"no":7,"x":179135.7577,"y":259866.6809,"z":43.672,"azimuthDeg":12.737694444444458,"row":"후열"},{"no":8,"x":179138.2278,"y":259866.262,"z":43.744,"azimuthDeg":12.734138888888879,"row":"후열"},{"no":9,"x":179140.6978,"y":259865.8431,"z":43.816,"azimuthDeg":12.730611111111102,"row":"후열"},{"no":10,"x":179143.1679,"y":259865.4242,"z":43.887,"azimuthDeg":12.72705555555558,"row":"후열"}],"bearingAzimuthFrame":"model-xy"},"draft":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"T형","copingTopEl":43.411,"footingBottomEl":26.208,"groundEl":28.931,"foundationType":"말뚝기초","pileLengthMm":24400,"copingWidthMm":3500,"copingLengthMm":12500,"columnCount":1,"ips":[{"name":"IP1","x":179132.091213,"y":259866.694501,"angleDeg":0},{"name":"IP2","x":179144.095968,"y":259864.658395,"angleDeg":0},{"name":"IP3","x":179144.086088,"y":259864.66007,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":179132.9863,"y":259865.8348,"z":43.625,"azimuthDeg":14.051138888888886,"row":"전열"},{"no":2,"x":179135.4565,"y":259865.4158,"z":43.697,"azimuthDeg":14.046083333333343,"row":"전열"},{"no":3,"x":179137.9267,"y":259864.9969,"z":43.768,"azimuthDeg":14.041055555555545,"row":"전열"},{"no":4,"x":179140.3968,"y":25986Line truncated

project_data/03_prj_json/sample03.pzr.json

@@ -0,0 +1 @@
+{"schemaVersion":1,"project":{"name":"샘플 03 · 대호지교","bridge":"대호지교","client":"","author":"","crs":"EPSG:5186","memo":"도면추출 연동 샘플 + 원도면 지반. 설계 지반고 유지. 지도 CRS는 원자료 확인이 필요한 가정(project_default_not_source_verified)."},"source":{"fileName":"샘플03_대호지교_교각입력데이터.xlsx","sheets":["Pier","IP","Bearing"]},"piers":[{"id":"P1","input":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"2주형","copingTopEl":7.738,"footingBottomEl":1.4,"groundEl":-0.342,"foundationType":"현장타설말뚝","pileLengthMm":29802,"copingWidthMm":3500,"copingLengthMm":24500,"columnCount":2,"ips":[{"name":"IP1","x":153837.294388,"y":480726.410803,"angleDeg":0},{"name":"IP2","x":153833.31775,"y":480714.93,"angleDeg":0},{"name":"IP3","x":153829.341111,"y":480703.449196,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":153836.266,"y":480725.3912,"z":7.8178,"azimuthDeg":109.10472222222222,"row":"전열"},{"no":2,"x":153835.2514,"y":480722.462,"z":7.8798,"azimuthDeg":109.10472222222222,"row":"전열"},{"no":3,"x":153834.2368,"y":480719.5327,"z":7.9418,"azimuthDeg":109.10472222222222,"row":"전열"},{"no":4,"x":153833.2222,"y":480716.6034,"z":8.0038,"azimuthDeg":109.10472222222222,"row":"전열"},{"no":5,"x":153832.2076,"y":480713.6742,"z":8.0038,"azimuthDeg":109.10472222222222,"row":"전열"},{"no":6,"x":153831.193,"y":480710.7449,"z":7.9418,"azimuthDeg":109.10472222222222,"row":"전열"},{"no":7,"x":153830.1783,"y":480707.8157,"z":7.8798,"azimuthDeg":109.10472222222222,"row":"전열"},{"no":8,"x":153829.1637,"y":480704.8864,"z":7.8178,"azimuthDeg":109.10472222222222,"row":"전열"},{"no":9,"x":153837.4944,"y":480724.9657,"z":7.8243,"azimuthDeg":109.10472222222222,"row":"후열"},{"no":10,"x":153836.4798,"y":480722.0365,"z":7.8863,"azimuthDeg":109.10472222222222,"row":"후열"},{"no":11,"x":153835.4652,"y":480719.1072,"z":7.9483,"azimuthDeg":109.10472222222222,"row":"후열"},{"no":12,"x":153834.4506,"y":480716.178,"z":8.0103,"azimuthDeg":109.10472222222222,"row":"후열"},{"no":13,"x":153833.436,"y":480713.2487,"z":8.0103,"azimuthDeg":109.10472222222222,"row":"후열"},{"no":14,"x":153832.4213,"y":480710.3195,"z":7.9483,"azimuthDeg":109.10472222222222,"row":"후열"},{"no":15,"x":153831.4067,"y":480707.3902,"z":7.8863,"azimuthDeg":109.10472222222222,"row":"후열"},{"no":16,"x":153830.3921,"y":480704.4609,"z":7.8243,"azimuthDeg":109.10472222222222,"row":"후열"}],"bearingAzimuthFrame":"model-xy"},"defaults":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"2주형","copingTopEl":7.738,"footingBottomEl":1.4,"groundEl":-0.342,"foundationType":"현장타설말뚝","pileLengthMm":29802,"copingWidthMm":3500,"copingLengthMm":24500,"columnCount":2,"ips":[{"name":"IP1","x":153837.294388,"y":480726.410803,"angleDeg":0},{"name":"IP2","x":153833.31775,"y":480714.93,"angleDeg":0},{"name":"IP3","x":153829.341111,"y":480703.449196,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":153836.266,"y":480725.3912,"z":7.8178,"azimuthDeg":109.10472222222222,"row":"전열"},{"no":2,"x":153835.2514,"y":480722.462,"z":7.8798,"azimuthDeg":109.10472222222222,"row":"전열"},{"no":3,"x":153834.2368,"y":480719.5327,"z":7.9418,"azimuthDeg":109.10472222222222,"row":"전열"},{"no":4,"x":153833.2222,"y":480716.6034,"z":8.0038,"azimuthDeg":109.10472222222222,"row":"전열"},{"no":5,"x":153832.2076,"y":480713.6742,"z":8.0038,"azimuthDeg":109.10472222222222,"row":"전열"},{"no":6,"x":153831.193,"y":480710.7449,"z":7.9418,"azimuthDeg":109.10472222222222,"row":"전열"},{"no":7,"x":153830.1783,"y":480707.8157,"z":7.8798,"azimuthDeg":109.10472222222222,"row":"전열"},{"no":8,"x":153829.1637,"y":480704.8864,"z":7.8178,"azimuthDeg":109.10472222222222,"row":"전열"},{"no":9,"x":153837.4944,"y":480724.9657,"z":7.8243,"azimuthDeg":109.10472222222222,"row":"후열"},{"no":10,"x":153836.4798,"y":480722.0365,"z":7.8863,"azimuthDeg":109.10472222222222,"row":"후열"},{"no":11,"x":153835.4652,"y":480719.1072,"z":7.9483,"azimuthDeg":109.10472222222222,"row":"후열"},{"no":12,"x":153834.4506,"y":480716.178,"z":8.0103,"azimuthDeg":109.10472222222222,"row":"후열"},{"no":13,"x":153833.436,"y":480713.2487,"z":8.0103,"azimuthDeg":109.10472222222222,"row":"후열"},{"no":14,"x":153832.4213,"y":480710.3195,"z":7.9483,"azimuthDeg":109.10472222222222,"row":"후열"},{"no":15,"x":153831.4067,"y":480707.3902,"z":7.8863,"azimuthDeg":109.10472222222222,"Line truncated

project_data/03_prj_json/sample04.pzr.json

@@ -0,0 +1 @@
+{"schemaVersion":1,"project":{"name":"샘플 04 · 목동교","bridge":"목동교","client":"","author":"","crs":"EPSG:5186","memo":"도면추출 연동 샘플 + 원도면 지반. 설계 지반고 유지. 지도 CRS는 원자료 확인이 필요한 가정(project_default_not_source_verified)."},"source":{"fileName":"샘플04_목동교_교각입력데이터.xlsx","sheets":["Pier","IP","Bearing"]},"piers":[{"id":"P1","input":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"2주형","copingTopEl":133.8541,"footingBottomEl":110.854,"groundEl":118.79,"foundationType":"직접기초","pileLengthMm":0,"copingWidthMm":3500,"copingLengthMm":16500,"columnCount":2,"ips":[{"name":"IP1","x":218127.628104,"y":531065.25932,"angleDeg":0},{"name":"IP2","x":218138.896901,"y":531074.320997,"angleDeg":0},{"name":"IP3","x":218140.182759,"y":531075.355006,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":218129.3712,"y":531065.8269,"z":133.9411,"azimuthDeg":321.06191666666666,"row":"전열"},{"no":2,"x":218131.265,"y":531067.3497,"z":133.9896,"azimuthDeg":321.0619722222222,"row":"전열"},{"no":3,"x":218133.3535,"y":531069.0291,"z":134.043,"azimuthDeg":321.06202777777776,"row":"전열"},{"no":4,"x":218135.4421,"y":531070.7086,"z":134.0965,"azimuthDeg":321.06208333333336,"row":"전열"},{"no":5,"x":218137.5306,"y":531072.3881,"z":134.15,"azimuthDeg":321.06213888888885,"row":"전열"},{"no":6,"x":218139.4243,"y":531073.9109,"z":134.1985,"azimuthDeg":321.06219444444446,"row":"전열"},{"no":7,"x":218128.5503,"y":531066.8348,"z":133.953,"azimuthDeg":320.60875,"row":"후열"},{"no":8,"x":218130.4438,"y":531068.3578,"z":134.0015,"azimuthDeg":320.60897222222223,"row":"후열"},{"no":9,"x":218132.5324,"y":531070.0373,"z":134.055,"azimuthDeg":320.60922222222223,"row":"후열"},{"no":10,"x":218134.6209,"y":531071.7168,"z":134.1084,"azimuthDeg":320.6094444444444,"row":"후열"},{"no":11,"x":218136.7095,"y":531073.3962,"z":134.1619,"azimuthDeg":320.60966666666667,"row":"후열"},{"no":12,"x":218138.6034,"y":531074.9188,"z":134.2103,"azimuthDeg":320.6098888888889,"row":"후열"}],"bearingAzimuthFrame":"model-xy"},"defaults":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"2주형","copingTopEl":133.8541,"footingBottomEl":110.854,"groundEl":118.79,"foundationType":"직접기초","pileLengthMm":0,"copingWidthMm":3500,"copingLengthMm":16500,"columnCount":2,"ips":[{"name":"IP1","x":218127.628104,"y":531065.25932,"angleDeg":0},{"name":"IP2","x":218138.896901,"y":531074.320997,"angleDeg":0},{"name":"IP3","x":218140.182759,"y":531075.355006,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":218129.3712,"y":531065.8269,"z":133.9411,"azimuthDeg":321.06191666666666,"row":"전열"},{"no":2,"x":218131.265,"y":531067.3497,"z":133.9896,"azimuthDeg":321.0619722222222,"row":"전열"},{"no":3,"x":218133.3535,"y":531069.0291,"z":134.043,"azimuthDeg":321.06202777777776,"row":"전열"},{"no":4,"x":218135.4421,"y":531070.7086,"z":134.0965,"azimuthDeg":321.06208333333336,"row":"전열"},{"no":5,"x":218137.5306,"y":531072.3881,"z":134.15,"azimuthDeg":321.06213888888885,"row":"전열"},{"no":6,"x":218139.4243,"y":531073.9109,"z":134.1985,"azimuthDeg":321.06219444444446,"row":"전열"},{"no":7,"x":218128.5503,"y":531066.8348,"z":133.953,"azimuthDeg":320.60875,"row":"후열"},{"no":8,"x":218130.4438,"y":531068.3578,"z":134.0015,"azimuthDeg":320.60897222222223,"row":"후열"},{"no":9,"x":218132.5324,"y":531070.0373,"z":134.055,"azimuthDeg":320.60922222222223,"row":"후열"},{"no":10,"x":218134.6209,"y":531071.7168,"z":134.1084,"azimuthDeg":320.6094444444444,"row":"후열"},{"no":11,"x":218136.7095,"y":531073.3962,"z":134.1619,"azimuthDeg":320.60966666666667,"row":"후열"},{"no":12,"x":218138.6034,"y":531074.9188,"z":134.2103,"azimuthDeg":320.6098888888889,"row":"후열"}],"bearingAzimuthFrame":"model-xy"},"draft":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"2주형","copingTopEl":133.8541,"footingBottomEl":110.854,"groundEl":118.79,"foundationType":"직접기초","pileLengthMm":0,"copingWidthMm":3500,"copingLengthMm":16500,"columnCount":2,"ips":[{"name":"IP1","x":218127.628104,"y":531065.25932,"angleDeg":0},{"name":"IP2","x":218138.896901,"y":531074.320997,"angleDeg":0},{"name":"IP3"Line truncated

project_data/03_prj_json/sample05.pzr.json

@@ -0,0 +1 @@
+{"schemaVersion":1,"project":{"name":"샘플 05 · 승천천교","bridge":"승천천교","client":"","author":"","crs":"EPSG:5186","memo":"도면추출 연동 샘플 + 원도면 지반. 설계 지반고 유지. 지도 CRS는 원자료 확인이 필요한 가정(project_default_not_source_verified)."},"source":{"fileName":"샘플05_승천천교_교각입력데이터.xlsx","sheets":["Pier","IP","Bearing"]},"piers":[],"history":[{"version":"sample-20261102","note":"교각 Excel과 원도면 지반·위성사진·2D 지도 통합. 좌표·스키마·형상 검증.","at":"2026-11-02T14:34:50.364983"}],"bearingBasis":"excel","groundModel":{"schema":2,"generated":"2026-11-02","piers":[{"id":"P1","centerEl":55,"excelEl":null}],"terrainGrid":{"origin":[458809.512,224222.818],"step":5,"nx":41,"ny":41,"z":[null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55.322,55.896,55.661,55.11,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55.689,56.161,55.677,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55.78,55.857,55.371,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55.009,55.119,55.196,55.273,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,55,null,null,null,nullLine truncated

project_data/03_prj_json/sample06.pzr.json

@@ -0,0 +1 @@
+{"schemaVersion":1,"project":{"name":"샘플 06 · 계문철교","bridge":"계문철교","client":"","author":"","crs":"EPSG:5186","memo":"도면추출 연동 샘플 + 원도면 지반. 설계 지반고 유지. 지도 CRS는 원자료 확인이 필요한 가정(project_default_not_source_verified)."},"source":{"fileName":"샘플06_계문철교_교각입력데이터.xlsx","sheets":["Pier","IP","Bearing"]},"piers":[{"id":"P1","input":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"2주형","copingTopEl":18.5041,"footingBottomEl":4.804,"groundEl":7.06,"foundationType":"말뚝기초","pileLengthMm":21000,"copingWidthMm":3500,"copingLengthMm":21000,"columnCount":2,"ips":[{"name":"IP1","x":194908.7711,"y":376920.628019,"angleDeg":0},{"name":"IP2","x":194909.621705,"y":376910.212695,"angleDeg":0},{"name":"IP3","x":194910.472309,"y":376899.797371,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":194908.2982,"y":376919.5055,"z":19.6384,"azimuthDeg":83.45638888888891,"row":"전열"},{"no":2,"x":194908.5459,"y":376916.4756,"z":19.4854,"azimuthDeg":83.447,"row":"전열"},{"no":3,"x":194908.7936,"y":376913.4458,"z":19.3333,"azimuthDeg":83.43755555555555,"row":"전열"},{"no":4,"x":194909.0413,"y":376910.4159,"z":19.1822,"azimuthDeg":83.42797222222225,"row":"전열"},{"no":5,"x":194909.2891,"y":376907.386,"z":19.0292,"azimuthDeg":83.41830555555555,"row":"전열"},{"no":6,"x":194909.5368,"y":376904.3561,"z":18.8771,"azimuthDeg":83.40855555555555,"row":"전열"},{"no":7,"x":194909.7845,"y":376901.3262,"z":18.7251,"azimuthDeg":83.39869444444446,"row":"전열"},{"no":8,"x":194909.4601,"y":376919.6004,"z":19.6539,"azimuthDeg":87.6826388888889,"row":"후열"},{"no":9,"x":194909.7075,"y":376916.5705,"z":19.5019,"azimuthDeg":87.69441666666665,"row":"후열"},{"no":10,"x":194909.9548,"y":376913.5406,"z":19.3499,"azimuthDeg":87.7063333333333,"row":"후열"},{"no":11,"x":194910.2022,"y":376910.5106,"z":19.1979,"azimuthDeg":87.71836111111111,"row":"후열"},{"no":12,"x":194910.4496,"y":376907.4807,"z":19.0459,"azimuthDeg":87.7305,"row":"후열"},{"no":13,"x":194910.6969,"y":376904.4508,"z":18.8939,"azimuthDeg":87.74277777777775,"row":"후열"},{"no":14,"x":194910.9443,"y":376901.4209,"z":18.7419,"azimuthDeg":87.7551666666667,"row":"후열"}],"bearingAzimuthFrame":"model-xy"},"defaults":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"2주형","copingTopEl":18.5041,"footingBottomEl":4.804,"groundEl":7.06,"foundationType":"말뚝기초","pileLengthMm":21000,"copingWidthMm":3500,"copingLengthMm":21000,"columnCount":2,"ips":[{"name":"IP1","x":194908.7711,"y":376920.628019,"angleDeg":0},{"name":"IP2","x":194909.621705,"y":376910.212695,"angleDeg":0},{"name":"IP3","x":194910.472309,"y":376899.797371,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":194908.2982,"y":376919.5055,"z":19.6384,"azimuthDeg":83.45638888888891,"row":"전열"},{"no":2,"x":194908.5459,"y":376916.4756,"z":19.4854,"azimuthDeg":83.447,"row":"전열"},{"no":3,"x":194908.7936,"y":376913.4458,"z":19.3333,"azimuthDeg":83.43755555555555,"row":"전열"},{"no":4,"x":194909.0413,"y":376910.4159,"z":19.1822,"azimuthDeg":83.42797222222225,"row":"전열"},{"no":5,"x":194909.2891,"y":376907.386,"z":19.0292,"azimuthDeg":83.41830555555555,"row":"전열"},{"no":6,"x":194909.5368,"y":376904.3561,"z":18.8771,"azimuthDeg":83.40855555555555,"row":"전열"},{"no":7,"x":194909.7845,"y":376901.3262,"z":18.7251,"azimuthDeg":83.39869444444446,"row":"전열"},{"no":8,"x":194909.4601,"y":376919.6004,"z":19.6539,"azimuthDeg":87.6826388888889,"row":"후열"},{"no":9,"x":194909.7075,"y":376916.5705,"z":19.5019,"azimuthDeg":87.69441666666665,"row":"후열"},{"no":10,"x":194909.9548,"y":376913.5406,"z":19.3499,"azimuthDeg":87.7063333333333,"row":"후열"},{"no":11,"x":194910.2022,"y":376910.5106,"z":19.1979,"azimuthDeg":87.71836111111111,"row":"후열"},{"no":12,"x":194910.4496,"y":376907.4807,"z":19.0459,"azimuthDeg":87.7305,"row":"후열"},{"no":13,"x":194910.6969,"y":376904.4508,"z":18.8939,"azimuthDeg":87.74277777777775,"row":"후열"},{"no":14,"x":194910.9443,"y":376901.4209,"z":18.7419,"azimuthDeg":87.7551666666667,"row":"후열"}],"bearingAzimuthFrame":"model-xy"},"draft":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"PieLine truncated

project_data/03_prj_json/sample07.pzr.json

@@ -0,0 +1 @@
+{"schemaVersion":1,"project":{"name":"샘플 07 · 기양천교","bridge":"기양천교","client":"","author":"","crs":"EPSG:5186","memo":"도면추출 연동 샘플 + 원도면 지반. 설계 지반고 유지. 지도 CRS는 원자료 확인이 필요한 가정(project_default_not_source_verified)."},"source":{"fileName":"샘플07_기양천교_교각입력데이터.xlsx","sheets":["Pier","IP","Bearing"]},"piers":[{"id":"P1","input":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"2주형","copingTopEl":15.7665,"footingBottomEl":0.966,"groundEl":5.97,"foundationType":"말뚝기초","pileLengthMm":13600,"copingWidthMm":3500,"copingLengthMm":22500,"columnCount":2,"ips":[{"name":"IP1","x":195901.933872,"y":376676.684353,"angleDeg":0},{"name":"IP2","x":195904.750042,"y":376666.017388,"angleDeg":0},{"name":"IP3","x":195907.564243,"y":376655.357883,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":195901.7932,"y":376675.2306,"z":15.9498,"azimuthDeg":94.7138333333333,"row":"전열"},{"no":2,"x":195902.6065,"y":376672.1472,"z":16.0318,"azimuthDeg":94.67783333333335,"row":"전열"},{"no":3,"x":195903.4195,"y":376669.0643,"z":16.1134,"azimuthDeg":94.642,"row":"전열"},{"no":4,"x":195904.2324,"y":376665.9822,"z":16.1956,"azimuthDeg":94.60630555555554,"row":"전열"},{"no":5,"x":195905.045,"y":376662.9006,"z":16.2764,"azimuthDeg":94.57072222222223,"row":"전열"},{"no":6,"x":195905.8574,"y":376659.8197,"z":16.3568,"azimuthDeg":94.53527777777776,"row":"전열"},{"no":7,"x":195906.6696,"y":376656.7394,"z":16.4367,"azimuthDeg":94.4999722222222,"row":"전열"},{"no":8,"x":195902.9584,"y":376675.1501,"z":15.9811,"azimuthDeg":93.19136111111112,"row":"후열"},{"no":9,"x":195903.7717,"y":376672.0673,"z":16.0627,"azimuthDeg":93.15808333333337,"row":"후열"},{"no":10,"x":195904.5848,"y":376668.9852,"z":16.1438,"azimuthDeg":93.12494444444445,"row":"후열"},{"no":11,"x":195905.3977,"y":376665.9037,"z":16.2256,"azimuthDeg":93.09191666666669,"row":"후열"},{"no":12,"x":195906.2105,"y":376662.8229,"z":16.3059,"azimuthDeg":93.05902777777777,"row":"후열"},{"no":13,"x":195907.0231,"y":376659.7426,"z":16.3859,"azimuthDeg":93.02625,"row":"후열"},{"no":14,"x":195907.8355,"y":376656.663,"z":16.4654,"azimuthDeg":92.99358333333333,"row":"후열"}],"bearingAzimuthFrame":"model-xy"},"defaults":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"2주형","copingTopEl":15.7665,"footingBottomEl":0.966,"groundEl":5.97,"foundationType":"말뚝기초","pileLengthMm":13600,"copingWidthMm":3500,"copingLengthMm":22500,"columnCount":2,"ips":[{"name":"IP1","x":195901.933872,"y":376676.684353,"angleDeg":0},{"name":"IP2","x":195904.750042,"y":376666.017388,"angleDeg":0},{"name":"IP3","x":195907.564243,"y":376655.357883,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":195901.7932,"y":376675.2306,"z":15.9498,"azimuthDeg":94.7138333333333,"row":"전열"},{"no":2,"x":195902.6065,"y":376672.1472,"z":16.0318,"azimuthDeg":94.67783333333335,"row":"전열"},{"no":3,"x":195903.4195,"y":376669.0643,"z":16.1134,"azimuthDeg":94.642,"row":"전열"},{"no":4,"x":195904.2324,"y":376665.9822,"z":16.1956,"azimuthDeg":94.60630555555554,"row":"전열"},{"no":5,"x":195905.045,"y":376662.9006,"z":16.2764,"azimuthDeg":94.57072222222223,"row":"전열"},{"no":6,"x":195905.8574,"y":376659.8197,"z":16.3568,"azimuthDeg":94.53527777777776,"row":"전열"},{"no":7,"x":195906.6696,"y":376656.7394,"z":16.4367,"azimuthDeg":94.4999722222222,"row":"전열"},{"no":8,"x":195902.9584,"y":376675.1501,"z":15.9811,"azimuthDeg":93.19136111111112,"row":"후열"},{"no":9,"x":195903.7717,"y":376672.0673,"z":16.0627,"azimuthDeg":93.15808333333337,"row":"후열"},{"no":10,"x":195904.5848,"y":376668.9852,"z":16.1438,"azimuthDeg":93.12494444444445,"row":"후열"},{"no":11,"x":195905.3977,"y":376665.9037,"z":16.2256,"azimuthDeg":93.09191666666669,"row":"후열"},{"no":12,"x":195906.2105,"y":376662.8229,"z":16.3059,"azimuthDeg":93.05902777777777,"row":"후열"},{"no":13,"x":195907.0231,"y":376659.7426,"z":16.3859,"azimuthDeg":93.02625,"row":"후열"},{"no":14,"x":195907.8355,"y":376656.663,"z":16.4654,"azimuthDeg":92.99358333333333,"row":"후열"}],"bearingAzimuthFrame":"model-xy"},"draft":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheetLine truncated

project_data/03_prj_json/sample08.pzr.json

@@ -0,0 +1 @@
+{"schemaVersion":1,"project":{"name":"샘플 08 · 옥성교","bridge":"옥성교","client":"","author":"","crs":"EPSG:5186","memo":"도면추출 연동 샘플 + 원도면 지반. 설계 지반고 유지. 지도 CRS는 원자료 확인이 필요한 가정(project_default_not_source_verified)."},"source":{"fileName":"샘플08_옥성교_교각입력데이터.xlsx","sheets":["Pier","IP","Bearing"]},"piers":[{"id":"P1","input":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"T형","copingTopEl":21.1279,"footingBottomEl":12.175,"groundEl":18.09,"foundationType":"말뚝기초","pileLengthMm":22000,"copingWidthMm":3500,"copingLengthMm":13500,"columnCount":1,"ips":[{"name":"IP1","x":207605.780013,"y":429978.461366,"angleDeg":0},{"name":"IP2","x":207599.646855,"y":429976.251707,"angleDeg":0},{"name":"IP3","x":207593.513698,"y":429974.042048,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":207604.1324,"y":429978.4314,"z":21.3981,"azimuthDeg":142.18688888888886,"row":"전열"},{"no":2,"x":207601.8028,"y":429977.5921,"z":21.4317,"azimuthDeg":142.18688888888886,"row":"전열"},{"no":3,"x":207599.4732,"y":429976.7528,"z":21.4653,"azimuthDeg":142.18688888888886,"row":"전열"},{"no":4,"x":207597.1436,"y":429975.9134,"z":21.4115,"azimuthDeg":142.18688888888886,"row":"전열"},{"no":5,"x":207594.814,"y":429975.0741,"z":21.3509,"azimuthDeg":142.18688888888886,"row":"전열"},{"no":6,"x":207604.868,"y":429977.4835,"z":21.4193,"azimuthDeg":142.18688888888886,"row":"후열"},{"no":7,"x":207602.5384,"y":429976.6442,"z":21.4529,"azimuthDeg":142.18688888888886,"row":"후열"},{"no":8,"x":207600.2088,"y":429975.8048,"z":21.4865,"azimuthDeg":142.18688888888886,"row":"후열"},{"no":9,"x":207597.8792,"y":429974.9655,"z":21.4326,"azimuthDeg":142.18688888888886,"row":"후열"},{"no":10,"x":207595.5496,"y":429974.1262,"z":21.372,"azimuthDeg":142.18688888888886,"row":"후열"}],"bearingAzimuthFrame":"model-xy"},"defaults":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"T형","copingTopEl":21.1279,"footingBottomEl":12.175,"groundEl":18.09,"foundationType":"말뚝기초","pileLengthMm":22000,"copingWidthMm":3500,"copingLengthMm":13500,"columnCount":1,"ips":[{"name":"IP1","x":207605.780013,"y":429978.461366,"angleDeg":0},{"name":"IP2","x":207599.646855,"y":429976.251707,"angleDeg":0},{"name":"IP3","x":207593.513698,"y":429974.042048,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":207604.1324,"y":429978.4314,"z":21.3981,"azimuthDeg":142.18688888888886,"row":"전열"},{"no":2,"x":207601.8028,"y":429977.5921,"z":21.4317,"azimuthDeg":142.18688888888886,"row":"전열"},{"no":3,"x":207599.4732,"y":429976.7528,"z":21.4653,"azimuthDeg":142.18688888888886,"row":"전열"},{"no":4,"x":207597.1436,"y":429975.9134,"z":21.4115,"azimuthDeg":142.18688888888886,"row":"전열"},{"no":5,"x":207594.814,"y":429975.0741,"z":21.3509,"azimuthDeg":142.18688888888886,"row":"전열"},{"no":6,"x":207604.868,"y":429977.4835,"z":21.4193,"azimuthDeg":142.18688888888886,"row":"후열"},{"no":7,"x":207602.5384,"y":429976.6442,"z":21.4529,"azimuthDeg":142.18688888888886,"row":"후열"},{"no":8,"x":207600.2088,"y":429975.8048,"z":21.4865,"azimuthDeg":142.18688888888886,"row":"후열"},{"no":9,"x":207597.8792,"y":429974.9655,"z":21.4326,"azimuthDeg":142.18688888888886,"row":"후열"},{"no":10,"x":207595.5496,"y":429974.1262,"z":21.372,"azimuthDeg":142.18688888888886,"row":"후열"}],"bearingAzimuthFrame":"model-xy"},"draft":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"T형","copingTopEl":21.1279,"footingBottomEl":12.175,"groundEl":18.09,"foundationType":"말뚝기초","pileLengthMm":22000,"copingWidthMm":3500,"copingLengthMm":13500,"columnCount":1,"ips":[{"name":"IP1","x":207605.780013,"y":429978.461366,"angleDeg":0},{"name":"IP2","x":207599.646855,"y":429976.251707,"angleDeg":0},{"name":"IP3","x":207593.513698,"y":429974.042048,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":207604.1324,"y":429978.4314,"z":21.3981,"azimuthDeg":142.18688888888886,"row":"전열"},{"no":2,"x":207601.8028,"y":429977.5921,"z":21.4317,"azimuthDeg":142.18688888888886,"row":"전열"},{"no":3,"x":207599.4732,"y":429976.7528,"z":21.4653,"azimuthDeg":142.18688888888886,"row":"전열Line truncated

project_data/03_prj_json/sample09.pzr.json

@@ -0,0 +1 @@
+{"schemaVersion":1,"project":{"name":"샘플 09 · 새재1교","bridge":"새재1교","client":"","author":"","crs":"EPSG:5186","memo":"도면추출 연동 샘플 + 원도면 지반. 설계 지반고 유지. 지도 CRS는 원자료 확인이 필요한 가정(project_default_not_source_verified)."},"source":{"fileName":"샘플09_새재1교_교각입력데이터.xlsx","sheets":["Pier","IP","Bearing"]},"piers":[{"id":"P1","input":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"T형","copingTopEl":32.5316,"footingBottomEl":10.032,"groundEl":16.95,"foundationType":"직접기초","pileLengthMm":0,"copingWidthMm":3000,"copingLengthMm":12500,"columnCount":1,"ips":[{"name":"IP1","x":208547.804218,"y":428110.699674,"angleDeg":0},{"name":"IP2","x":208542.956234,"y":428106.806474,"angleDeg":0},{"name":"IP3","x":208538.108532,"y":428102.913503,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":208546.25,"y":428110.0923,"z":32.7901,"azimuthDeg":139.06241666666665,"row":"전열"},{"no":2,"x":208544.2952,"y":428108.5226,"z":32.8911,"azimuthDeg":139.07152777777776,"row":"전열"},{"no":3,"x":208542.3406,"y":428106.9529,"z":32.9921,"azimuthDeg":139.08055555555552,"row":"전열"},{"no":4,"x":208540.3859,"y":428105.3832,"z":33.0931,"azimuthDeg":139.0895277777778,"row":"전열"},{"no":5,"x":208538.4314,"y":428103.8136,"z":33.1941,"azimuthDeg":139.0984166666667,"row":"전열"},{"no":6,"x":208546.9329,"y":428109.3626,"z":32.7757,"azimuthDeg":134.73080555555555,"row":"후열"},{"no":7,"x":208544.978,"y":428107.7926,"z":32.8767,"azimuthDeg":134.75805555555553,"row":"후열"},{"no":8,"x":208543.0231,"y":428106.2227,"z":32.9777,"azimuthDeg":134.78505555555557,"row":"후열"},{"no":9,"x":208541.0682,"y":428104.6528,"z":33.0787,"azimuthDeg":134.8118333333333,"row":"후열"},{"no":10,"x":208539.1134,"y":428103.083,"z":33.1797,"azimuthDeg":134.83838888888891,"row":"후열"}],"bearingAzimuthFrame":"model-xy"},"defaults":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"T형","copingTopEl":32.5316,"footingBottomEl":10.032,"groundEl":16.95,"foundationType":"직접기초","pileLengthMm":0,"copingWidthMm":3000,"copingLengthMm":12500,"columnCount":1,"ips":[{"name":"IP1","x":208547.804218,"y":428110.699674,"angleDeg":0},{"name":"IP2","x":208542.956234,"y":428106.806474,"angleDeg":0},{"name":"IP3","x":208538.108532,"y":428102.913503,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":208546.25,"y":428110.0923,"z":32.7901,"azimuthDeg":139.06241666666665,"row":"전열"},{"no":2,"x":208544.2952,"y":428108.5226,"z":32.8911,"azimuthDeg":139.07152777777776,"row":"전열"},{"no":3,"x":208542.3406,"y":428106.9529,"z":32.9921,"azimuthDeg":139.08055555555552,"row":"전열"},{"no":4,"x":208540.3859,"y":428105.3832,"z":33.0931,"azimuthDeg":139.0895277777778,"row":"전열"},{"no":5,"x":208538.4314,"y":428103.8136,"z":33.1941,"azimuthDeg":139.0984166666667,"row":"전열"},{"no":6,"x":208546.9329,"y":428109.3626,"z":32.7757,"azimuthDeg":134.73080555555555,"row":"후열"},{"no":7,"x":208544.978,"y":428107.7926,"z":32.8767,"azimuthDeg":134.75805555555553,"row":"후열"},{"no":8,"x":208543.0231,"y":428106.2227,"z":32.9777,"azimuthDeg":134.78505555555557,"row":"후열"},{"no":9,"x":208541.0682,"y":428104.6528,"z":33.0787,"azimuthDeg":134.8118333333333,"row":"후열"},{"no":10,"x":208539.1134,"y":428103.083,"z":33.1797,"azimuthDeg":134.83838888888891,"row":"후열"}],"bearingAzimuthFrame":"model-xy"},"draft":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"T형","copingTopEl":32.5316,"footingBottomEl":10.032,"groundEl":16.95,"foundationType":"직접기초","pileLengthMm":0,"copingWidthMm":3000,"copingLengthMm":12500,"columnCount":1,"ips":[{"name":"IP1","x":208547.804218,"y":428110.699674,"angleDeg":0},{"name":"IP2","x":208542.956234,"y":428106.806474,"angleDeg":0},{"name":"IP3","x":208538.108532,"y":428102.913503,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":208546.25,"y":428110.0923,"z":32.7901,"azimuthDeg":139.06241666666665,"row":"전열"},{"no":2,"x":208544.2952,"y":428108.5226,"z":32.8911,"azimuthDeg":139.07152777777776,"row":"전열"},{"no":3,"x":208542.3406,"y":428106.9529,"z":32.9921,"azimuthDeg":139.08055555555552,"row":"전열"},{"no":4,"x":2085Line truncated

project_data/03_prj_json/sample10.pzr.json

@@ -0,0 +1 @@
+{"schemaVersion":1,"project":{"name":"샘플 10 · 도하4교","bridge":"도하4교","client":"","author":"","crs":"EPSG:5186","memo":"도면추출 연동 샘플 + 원도면 지반. 설계 지반고 유지. 지도 CRS는 원자료 확인이 필요한 가정(project_default_not_source_verified)."},"source":{"fileName":"샘플10_도하4교_교각입력데이터.xlsx","sheets":["Pier","IP","Bearing"]},"piers":[{"id":"P1","input":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"T형","copingTopEl":98.552,"footingBottomEl":78.852,"groundEl":85.365,"foundationType":"직접기초","pileLengthMm":0,"copingWidthMm":4000,"copingLengthMm":12500,"columnCount":1,"ips":[{"name":"IP1","x":200987.223238,"y":583704.910196,"angleDeg":0},{"name":"IP2","x":200987.580804,"y":583703.299406,"angleDeg":0},{"name":"IP3","x":200989.888734,"y":583692.902485,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":200987.095,"y":583702.013,"z":98.859,"azimuthDeg":77.47163888888889,"row":"전열"},{"no":2,"x":200988.549,"y":583695.473,"z":98.725,"azimuthDeg":77.47163888888889,"row":"전열"},{"no":3,"x":200988.565,"y":583702.34,"z":98.847,"azimuthDeg":77.49702777777776,"row":"후열"},{"no":4,"x":200990.015,"y":583695.798,"z":98.713,"azimuthDeg":77.49700000000001,"row":"후열"}],"bearingAzimuthFrame":"model-xy"},"defaults":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"T형","copingTopEl":98.552,"footingBottomEl":78.852,"groundEl":85.365,"foundationType":"직접기초","pileLengthMm":0,"copingWidthMm":4000,"copingLengthMm":12500,"columnCount":1,"ips":[{"name":"IP1","x":200987.223238,"y":583704.910196,"angleDeg":0},{"name":"IP2","x":200987.580804,"y":583703.299406,"angleDeg":0},{"name":"IP3","x":200989.888734,"y":583692.902485,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":200987.095,"y":583702.013,"z":98.859,"azimuthDeg":77.47163888888889,"row":"전열"},{"no":2,"x":200988.549,"y":583695.473,"z":98.725,"azimuthDeg":77.47163888888889,"row":"전열"},{"no":3,"x":200988.565,"y":583702.34,"z":98.847,"azimuthDeg":77.49702777777776,"row":"후열"},{"no":4,"x":200990.015,"y":583695.798,"z":98.713,"azimuthDeg":77.49700000000001,"row":"후열"}],"bearingAzimuthFrame":"model-xy"},"draft":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"T형","copingTopEl":98.552,"footingBottomEl":78.852,"groundEl":85.365,"foundationType":"직접기초","pileLengthMm":0,"copingWidthMm":4000,"copingLengthMm":12500,"columnCount":1,"ips":[{"name":"IP1","x":200987.223238,"y":583704.910196,"angleDeg":0},{"name":"IP2","x":200987.580804,"y":583703.299406,"angleDeg":0},{"name":"IP3","x":200989.888734,"y":583692.902485,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":200987.095,"y":583702.013,"z":98.859,"azimuthDeg":77.47163888888889,"row":"전열"},{"no":2,"x":200988.549,"y":583695.473,"z":98.725,"azimuthDeg":77.47163888888889,"row":"전열"},{"no":3,"x":200988.565,"y":583702.34,"z":98.847,"azimuthDeg":77.49702777777776,"row":"후열"},{"no":4,"x":200990.015,"y":583695.798,"z":98.713,"azimuthDeg":77.49700000000001,"row":"후열"}],"bearingAzimuthFrame":"model-xy"}},{"id":"P2","input":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P2","sheet":"Pier","type":"T형","copingTopEl":98.108,"footingBottomEl":78.408,"groundEl":85.754,"foundationType":"직접기초","pileLengthMm":0,"copingWidthMm":4000,"copingLengthMm":12500,"columnCount":1,"ips":[{"name":"IP1","x":201041.036417,"y":583716.399861,"angleDeg":0},{"name":"IP2","x":201041.367881,"y":583714.783498,"angleDeg":0},{"name":"IP3","x":201043.507331,"y":583704.350605,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":201040.861,"y":583713.505,"z":98.415,"azimuthDeg":78.39847222222221,"row":"전열"},{"no":2,"x":201042.209,"y":583706.942,"z":98.281,"azimuthDeg":78.39847222222221,"row":"전열"},{"no":3,"x":201042.336,"y":583713.808,"z":98.402,"azimuthDeg":78.42386111111114,"row":"후열"},{"no":4,"x":201043.68,"y":583707.244,"z":98.268,"azimuthDeg":78.42383333333333,"row"Line truncated

project_data/03_prj_json/sample11.pzr.json

@@ -0,0 +1 @@
+{"schemaVersion":1,"project":{"name":"샘플 11 · 곡천교","bridge":"곡천교","client":"","author":"","crs":"EPSG:5186","memo":"도면추출 연동 샘플 + 원도면 지반. 설계 지반고 유지. 지도 CRS는 원자료 확인이 필요한 가정(project_default_not_source_verified)."},"source":{"fileName":"샘플11_곡천교_교각입력데이터.xlsx","sheets":["Pier","IP","Bearing"]},"piers":[{"id":"P1","input":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"2주형","copingTopEl":86.8393,"footingBottomEl":61.44,"groundEl":64.692,"foundationType":"직접기초","pileLengthMm":0,"copingWidthMm":3500,"copingLengthMm":17000,"columnCount":2,"ips":[{"name":"IP1","x":226998.64978,"y":492646.179517,"angleDeg":0},{"name":"IP2","x":226998.640605,"y":492646.174649,"angleDeg":0},{"name":"IP3","x":227013.515037,"y":492654.066886,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":226999.795,"y":492646.0899,"z":87.3778,"azimuthDeg":347.36733333333336,"row":"전열"},{"no":2,"x":227002.2906,"y":492647.414,"z":87.2989,"azimuthDeg":347.3780277777778,"row":"전열"},{"no":3,"x":227004.7862,"y":492648.7381,"z":87.2201,"azimuthDeg":347.38875,"row":"전열"},{"no":4,"x":227007.282,"y":492650.0623,"z":87.1413,"azimuthDeg":347.39947222222224,"row":"전열"},{"no":5,"x":227009.7779,"y":492651.3866,"z":87.0623,"azimuthDeg":347.4102222222222,"row":"전열"},{"no":6,"x":227012.2739,"y":492652.7109,"z":86.9834,"azimuthDeg":347.421,"row":"전열"},{"no":7,"x":226999.5196,"y":492647.3558,"z":87.3832,"azimuthDeg":348.11983333333336,"row":"후열"},{"no":8,"x":227002.0154,"y":492648.6799,"z":87.3043,"azimuthDeg":348.1310555555556,"row":"후열"},{"no":9,"x":227004.5113,"y":492650.0041,"z":87.2254,"azimuthDeg":348.1422777777778,"row":"후열"},{"no":10,"x":227007.0073,"y":492651.3283,"z":87.1466,"azimuthDeg":348.15352777777775,"row":"후열"},{"no":11,"x":227009.5035,"y":492652.6527,"z":87.0676,"azimuthDeg":348.1647777777778,"row":"후열"},{"no":12,"x":227011.9998,"y":492653.9771,"z":86.9886,"azimuthDeg":348.17605555555554,"row":"후열"}],"bearingAzimuthFrame":"model-xy"},"defaults":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"2주형","copingTopEl":86.8393,"footingBottomEl":61.44,"groundEl":64.692,"foundationType":"직접기초","pileLengthMm":0,"copingWidthMm":3500,"copingLengthMm":17000,"columnCount":2,"ips":[{"name":"IP1","x":226998.64978,"y":492646.179517,"angleDeg":0},{"name":"IP2","x":226998.640605,"y":492646.174649,"angleDeg":0},{"name":"IP3","x":227013.515037,"y":492654.066886,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":226999.795,"y":492646.0899,"z":87.3778,"azimuthDeg":347.36733333333336,"row":"전열"},{"no":2,"x":227002.2906,"y":492647.414,"z":87.2989,"azimuthDeg":347.3780277777778,"row":"전열"},{"no":3,"x":227004.7862,"y":492648.7381,"z":87.2201,"azimuthDeg":347.38875,"row":"전열"},{"no":4,"x":227007.282,"y":492650.0623,"z":87.1413,"azimuthDeg":347.39947222222224,"row":"전열"},{"no":5,"x":227009.7779,"y":492651.3866,"z":87.0623,"azimuthDeg":347.4102222222222,"row":"전열"},{"no":6,"x":227012.2739,"y":492652.7109,"z":86.9834,"azimuthDeg":347.421,"row":"전열"},{"no":7,"x":226999.5196,"y":492647.3558,"z":87.3832,"azimuthDeg":348.11983333333336,"row":"후열"},{"no":8,"x":227002.0154,"y":492648.6799,"z":87.3043,"azimuthDeg":348.1310555555556,"row":"후열"},{"no":9,"x":227004.5113,"y":492650.0041,"z":87.2254,"azimuthDeg":348.1422777777778,"row":"후열"},{"no":10,"x":227007.0073,"y":492651.3283,"z":87.1466,"azimuthDeg":348.15352777777775,"row":"후열"},{"no":11,"x":227009.5035,"y":492652.6527,"z":87.0676,"azimuthDeg":348.1647777777778,"row":"후열"},{"no":12,"x":227011.9998,"y":492653.9771,"z":86.9886,"azimuthDeg":348.17605555555554,"row":"후열"}],"bearingAzimuthFrame":"model-xy"},"draft":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"2주형","copingTopEl":86.8393,"footingBottomEl":61.44,"groundEl":64.692,"foundationType":"직접기초","pileLengthMm":0,"copingWidthMm":3500,"copingLengthMm":17000,"columnCount":2,"ips":[{"name":"IP1","x":226998.64978,"y":492646.179517,"angleDeg":0},{"name":"IP2","x":226998.640605,"y":492646.174649,"angleDeg":0},{"name":"IP3","x":227013.515037,"y":492654.066886,"angleDeg":0},{"Line truncated

project_data/03_prj_json/sample12.pzr.json

@@ -0,0 +1 @@
+{"schemaVersion":1,"project":{"name":"샘플 12 · 감북교","bridge":"감북교","client":"","author":"","crs":"EPSG:5186","memo":"도면추출 연동 샘플 + 원도면 지반. 설계 지반고 유지. 지도 CRS는 원자료 확인이 필요한 가정(inferred_false_northing_convention_not_source_verified)."},"source":{"fileName":"샘플12_감북교_교각입력데이터.xlsx","sheets":["Pier","IP","Bearing"]},"piers":[{"id":"P1","input":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"2주형","copingTopEl":56.5998,"footingBottomEl":43.604,"groundEl":44.64,"foundationType":"현장타설말뚝","pileLengthMm":17566,"copingWidthMm":3000,"copingLengthMm":20000,"columnCount":2,"ips":[{"name":"IP1","x":214529.86606,"y":547194.678176,"angleDeg":0},{"name":"IP2","x":214548.146791,"y":547202.413639,"angleDeg":0},{"name":"IP3","x":214548.137582,"y":547202.409742,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":214531.1568,"y":547194.6814,"z":56.8196,"azimuthDeg":337.06444444444446,"row":"전열"},{"no":2,"x":214533.8276,"y":547195.8116,"z":56.8776,"azimuthDeg":337.06444444444446,"row":"전열"},{"no":3,"x":214536.4983,"y":547196.9417,"z":56.9356,"azimuthDeg":337.06444444444446,"row":"전열"},{"no":4,"x":214539.169,"y":547198.0718,"z":56.9936,"azimuthDeg":337.06444444444446,"row":"전열"},{"no":5,"x":214541.8398,"y":547199.2019,"z":57.0516,"azimuthDeg":337.06444444444446,"row":"전열"},{"no":6,"x":214544.5105,"y":547200.332,"z":57.1096,"azimuthDeg":337.06444444444446,"row":"전열"},{"no":7,"x":214547.1812,"y":547201.4622,"z":57.1676,"azimuthDeg":337.06444444444446,"row":"전열"},{"no":8,"x":214530.7671,"y":547195.6024,"z":56.7998,"azimuthDeg":337.06444444444446,"row":"후열"},{"no":9,"x":214533.4379,"y":547196.7325,"z":56.8578,"azimuthDeg":337.06444444444446,"row":"후열"},{"no":10,"x":214536.1086,"y":547197.8626,"z":56.9158,"azimuthDeg":337.06444444444446,"row":"후열"},{"no":11,"x":214538.7793,"y":547198.9927,"z":56.9738,"azimuthDeg":337.06444444444446,"row":"후열"},{"no":12,"x":214541.4501,"y":547200.1229,"z":57.0318,"azimuthDeg":337.06444444444446,"row":"후열"},{"no":13,"x":214544.1208,"y":547201.253,"z":57.0898,"azimuthDeg":337.06444444444446,"row":"후열"},{"no":14,"x":214546.7916,"y":547202.3831,"z":57.1478,"azimuthDeg":337.06444444444446,"row":"후열"}],"bearingAzimuthFrame":"model-xy"},"defaults":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"pileThicknessMm":12,"copingH1Mm":1000,"copingH2Mm":1500,"levelWidthMm":2100,"name":"P1","sheet":"Pier","type":"2주형","copingTopEl":56.5998,"footingBottomEl":43.604,"groundEl":44.64,"foundationType":"현장타설말뚝","pileLengthMm":17566,"copingWidthMm":3000,"copingLengthMm":20000,"columnCount":2,"ips":[{"name":"IP1","x":214529.86606,"y":547194.678176,"angleDeg":0},{"name":"IP2","x":214548.146791,"y":547202.413639,"angleDeg":0},{"name":"IP3","x":214548.137582,"y":547202.409742,"angleDeg":0},{"name":"IP4","x":0,"y":0,"angleDeg":0}],"bearings":[{"no":1,"x":214531.1568,"y":547194.6814,"z":56.8196,"azimuthDeg":337.06444444444446,"row":"전열"},{"no":2,"x":214533.8276,"y":547195.8116,"z":56.8776,"azimuthDeg":337.06444444444446,"row":"전열"},{"no":3,"x":214536.4983,"y":547196.9417,"z":56.9356,"azimuthDeg":337.06444444444446,"row":"전열"},{"no":4,"x":214539.169,"y":547198.0718,"z":56.9936,"azimuthDeg":337.06444444444446,"row":"전열"},{"no":5,"x":214541.8398,"y":547199.2019,"z":57.0516,"azimuthDeg":337.06444444444446,"row":"전열"},{"no":6,"x":214544.5105,"y":547200.332,"z":57.1096,"azimuthDeg":337.06444444444446,"row":"전열"},{"no":7,"x":214547.1812,"y":547201.4622,"z":57.1676,"azimuthDeg":337.06444444444446,"row":"전열"},{"no":8,"x":214530.7671,"y":547195.6024,"z":56.7998,"azimuthDeg":337.06444444444446,"row":"후열"},{"no":9,"x":214533.4379,"y":547196.7325,"z":56.8578,"azimuthDeg":337.06444444444446,"row":"후열"},{"no":10,"x":214536.1086,"y":547197.8626,"z":56.9158,"azimuthDeg":337.06444444444446,"row":"후열"},{"no":11,"x":214538.7793,"y":547198.9927,"z":56.9738,"azimuthDeg":337.06444444444446,"row":"후열"},{"no":12,"x":214541.4501,"y":547200.1229,"z":57.0318,"azimuthDeg":337.06444444444446,"row":"후열"},{"no":13,"x":214544.1208,"y":547201.253,"z":57.0898,"azimuthDeg":337.06444444444446,"row":"후열"},{"no":14,"x":214546.7916,"y":547202.3831,"z":57.1478,"azimuthDeg":337.06444444444446,"row":"후열"}],"bearingAzimuthFrame":"model-xy"},"draft":{"columnDiameterMm":2000,"footingLengthMm":10400,"footingWidthMm":8150,"footingHeightMm":2000,"blindingMarginMm":100,"blindingThicknessMm":100,"pileKind":"강관","pileOuterMm":609.6,"Line truncated

scripts/capture-landing-hero.cjs

@@ -0,0 +1,64 @@
+// Run with Windows Node and an isolated Chrome on CDP 9444; Vite must be on 5173.
+const fs = require('node:fs'), path = require('node:path'), assert = require('node:assert/strict');
+const preview=process.argv.includes('--horizontal-preview');
+const lowerPreview=process.argv.includes('--lower-preview');
+const out = path.resolve(__dirname, lowerPreview?'../.verify/landing-lower-20261109':process.argv.includes('--all')?'../.verify/landing-hero-20261109':'../.verify/landing-horizontal-20261109');
+fs.mkdirSync(out, { recursive: true });
+const report = { checks: [], errors: [] };
+let ws, send;
+const delay = ms => new Promise(r => setTimeout(r, ms));
+(async () => {
+  const target = await (await fetch('http://127.0.0.1:9444/json/new?about:blank', { method: 'PUT' })).json();
+  ws = new WebSocket(target.webSocketDebuggerUrl);
+  await new Promise((r, j) => { ws.onopen = r; ws.onerror = j; });
+  let seq = 0; const pending = new Map();
+  ws.onmessage = ({ data }) => {
+    const m = JSON.parse(data), p = pending.get(m.id);
+    if (p) { clearTimeout(p.timer); pending.delete(m.id); m.error ? p.reject(new Error(JSON.stringify(m.error))) : p.resolve(m.result); }
+    if (m.method === 'Runtime.exceptionThrown') report.errors.push(m.params.exceptionDetails.exception?.description || m.params.exceptionDetails.text);
+  };
+  send = (method, params = {}) => new Promise((resolve, reject) => {
+    const id = ++seq, timer = setTimeout(() => reject(new Error('Timeout ' + method)), 30000);
+    pending.set(id, { resolve, reject, timer }); ws.send(JSON.stringify({ id, method, params }));
+  });
+  const ev = async expression => {
+    const r = await send('Runtime.evaluate', { expression, awaitPromise: true, returnByValue: true });
+    if (r.exceptionDetails) throw new Error(r.exceptionDetails.exception?.description || r.exceptionDetails.text);
+    return r.result.value;
+  };
+  const until = async expression => {
+    for (let i = 0; i < 120; i++) { if (await ev(expression)) return; await delay(150); }
+    throw new Error('Wait ' + expression);
+  };
+  const check = (name, value) => { assert.ok(value, name); report.checks.push(name); console.log('PASS', name); };
+  const click = expression => ev(`(()=>{const e=${expression};if(!e||e.disabled)throw new Error('Missing target');e.click();})()`);
+  const shot = async name => {
+    const r = await send('Page.captureScreenshot', { format: 'png' });
+    fs.writeFileSync(path.join(out, name + '.png'), Buffer.from(r.data, 'base64'));
+  };
+  await send('Page.enable'); await send('Runtime.enable'); await send('DOM.enable');
+  await send('Emulation.setDeviceMetricsOverride', { width: 1600, height: 1000, deviceScaleFactor: 1, mobile: false });
+  await send('Page.navigate', { url: process.env.PIERZAINER_URL || 'http://127.0.0.1:5173/' });
+  await until(`typeof window.openSampleProject==='function'`);
+  const projectPath=process.env.OKSEONG_PROJECT||path.resolve(__dirname,'../.verify/ground-abutments-20261109/saved.pzr.json');
+  const projectText=fs.readFileSync(projectPath,'utf8');
+  const hash=require('node:crypto').createHash('sha256').update(projectText).digest('hex');
+  await ev(`window.__heroProject=JSON.parse(${JSON.stringify(projectText)})`);
+  const variants=lowerPreview ? [['lower-33',.65,0,30,true,true],['lower-27',.5,0,30,true,true],['lower-19',.35,0,30,true,true],['lower-27-cutaway',.5,0,30,true,true,8]] : preview ? [['horizontal',.85,0,30,true],['horizontal-smooth',.85,0,30,true,true]] : process.argv.includes('--all') ? [['low',.35,0],['balanced',.55,.12],['high',.8,-.12],['trim30',.55,.12,30],['trim20',.55,.12,20],['refined',.85,.12,30,true]] : [['horizontal-smooth',.85,0,30,true,true]];
+  for(const [name,elevation,along,margin,refined,smooth,cutaway] of variants){
+    const result=await ev(`(async()=>{const {renderLandingHero}=await import('/scripts/render-landing-hero.ts');return renderLandingHero(window.__heroProject,${elevation},${along},${margin},${refined},${smooth},${cutaway});})()`);
+    for(const type of ['png','webp'])fs.writeFileSync(path.join(out,name+'.'+type),Buffer.from(result[type].split(',')[1],'base64'));
+    fs.writeFileSync(path.join(out,name+'.json'),JSON.stringify({...result.metadata,sourceSha256:hash},null,2));
+    check(name+' includes six piers and two abutments',result.metadata.piers===6&&result.metadata.abutments===2&&result.metadata.points.length===8);
+    check(name+' all projected markers stay inside image',result.metadata.points.every(p=>p.x>0&&p.x<result.metadata.width&&p.y>0&&p.y<result.metadata.height));
+    check(name+' light samples actual terrain densely',result.metadata.terrainFlow.filter(Boolean).length>100&&result.metadata.terrainFlow.every(p=>!p||Math.abs(p.world[1]-p.el-.12)<.0001));
+    if(refined)check('both road extensions contain continuous terrain-supported sections',result.metadata.roads.length===2&&result.metadata.roads.every(r=>r.missingSections===0&&r.validSections===81&&r.triangles>0));
+    if(smooth){
+      check('outline trims real pixels without filling missing terrain',result.metadata.outline.addedOutsideSourcePixels===0&&result.metadata.outline.retainedTerrainRatio>.8&&result.metadata.outline.retainedTerrainRatio<.99);
+      check('smooth outline preserves all eight structure tops',await ev(`(()=>{const c=document.createElement('canvas');c.width=${result.metadata.width*2};c.height=${result.metadata.height*2};return new Promise(resolve=>{const i=new Image();i.onload=()=>{const ctx=c.getContext('2d');ctx.drawImage(i,0,0);resolve(${JSON.stringify(result.metadata.points)}.every(p=>{let n=0;for(let x=-8;x<=8;x++)for(let y=0;y<30;y++)n+=ctx.getImageData(Math.round(p.x*2+x),Math.round(p.y*2+y),1,1).data[3]>0;return n>15;}));};i.src=${JSON.stringify(result.png)};});})()`));
+    }
+  }
+  check('no runtime exceptions',report.errors.length===0);report.result='PASS';
+})().catch(e=>{report.result='FAIL';report.failure=e.stack;process.exitCode=1;}).finally(()=>{
+  fs.writeFileSync(path.join(out,'report.json'),JSON.stringify(report,null,2));console.log(JSON.stringify(report));ws?.close();
+});

scripts/capture-sample.sh

@@ -1,12 +0,0 @@
-#!/usr/bin/env bash
-# Headless Chrome screenshot of the sample page (WSL2 → Windows Chrome).
-# Usage: scripts/capture-sample.sh <output.png> [url]
-# Requires the dev server: npm run dev -- --host 127.0.0.1 --port 5173
-set -euo pipefail
-OUT_WSL="${1:?output png path (WSL path)}"
-URL="${2:-http://127.0.0.1:5173/?sample=1}"
-CHROME="/mnt/c/Program Files/Google/Chrome/Application/chrome.exe"
-mkdir -p "$(dirname "$OUT_WSL")"
-timeout 200 "$CHROME" --headless=new --no-sandbox --use-gl=angle --use-angle=swiftshader \
-  --enable-unsafe-swiftshader --enable-logging=stderr --v=0 --window-size=1600,1000 \
-  --timeout=45000 --screenshot="$(wslpath -w "$OUT_WSL")" "$URL"

scripts/create-landing-outline-review.py

@@ -0,0 +1,42 @@
+"""Create a review sheet from native Three.js captures; validate local structure crops."""
+import json
+from pathlib import Path
+from PIL import Image, ImageChops, ImageDraw, ImageFont
+
+root = Path(__file__).resolve().parents[1]
+out = root / '.verify/landing-horizontal-20261109'
+metadata = json.loads((out / 'horizontal-smooth.json').read_text())
+raw = Image.open(out / 'horizontal.png').convert('RGBA')
+smooth = Image.open(out / 'horizontal-smooth.png').convert('RGBA')
+checks = []
+for point in metadata['points']:
+    x, y = point['x'] * 2, point['y'] * 2
+    box = (int(x - 48), int(y - 8), int(x + 48), int(y + 120))
+    assert ImageChops.difference(raw.crop(box), smooth.crop(box)).getbbox() is None, point['name']
+    checks.append(point['name'] + ' local structure pixels unchanged')
+assert metadata['along'] == 0
+assert metadata['outline']['addedOutsideSourcePixels'] == 0
+checks.extend(['horizontal camera has zero along-axis component', 'no pixels added outside source'])
+
+sheet = Image.new('RGB', (1600, 1050), '#f5f8fb')
+draw = ImageDraw.Draw(sheet)
+font = ImageFont.truetype('/usr/share/fonts/truetype/dejavu/DejaVuSans.ttf', 23)
+small = ImageFont.truetype('/usr/share/fonts/truetype/dejavu/DejaVuSans.ttf', 17)
+previous = out / 'before-horizontal/okseong-model-hero.png'
+panels = [
+    ('PREVIOUS / diagonal view, rough survey boundary', previous if previous.exists() else root / '랜딩페이지/assets/okseong-model-hero.png'),
+    ('PROPOSAL / horizontal orthographic view, inward curved boundary', out / 'horizontal-smooth.png'),
+]
+for i, (label, path) in enumerate(panels):
+    y = 25 + i * 510
+    draw.rounded_rectangle((20, y, 1580, y + 480), radius=20, fill='white', outline='#dce4ed')
+    draw.text((45, y + 20), label, font=font, fill='#19334d')
+    image = Image.open(path).convert('RGBA')
+    image = image.crop(image.getbbox())
+    image.thumbnail((1500, 380), Image.Resampling.LANCZOS)
+    sheet.paste(image, ((1600 - image.width) // 2, y + 80 + (380 - image.height) // 2), image)
+    if i == 1:
+        draw.text((45, y + 445), '6 piers + 2 abutments preserved / original survey unchanged / preview only', font=small, fill='#52667a')
+sheet.save(out / 'comparison.png')
+(out / 'review-report.json').write_text(json.dumps({'result': 'PASS', 'checks': checks}, indent=2))
+print(f'PASS {len(checks)} review checks; {out / "comparison.png"}')

scripts/diagnose-cast-in-place.mjs

@@ -0,0 +1,26 @@
+// Read-only diagnosis: concrete scene vs rebar paths for every pier/foundation combination.
+import { createServer } from 'vite';
+import { mkdir, writeFile } from 'node:fs/promises';
+const server = await createServer({ configFile: false, server: { middlewareMode: true, hmr: false, watch: null }, appType: 'custom' });
+try {
+  const { loadP1 } = await server.ssrLoadModule('/tests/helpers.ts');
+  const { buildPier } = await server.ssrLoadModule('/src/core/geometry.ts');
+  const { buildPierScene } = await server.ssrLoadModule('/src/view/scene.ts');
+  const { buildRebar3D } = await server.ssrLoadModule('/src/view/rebar3d.ts');
+  const { rebarSummary } = await server.ssrLoadModule('/src/core/rebar/summary.ts');
+  const result = [];
+  for (const [type, columnCount] of [['T형', 1], ['2주형', 2], ['3주형', 3]]) {
+    for (const foundationType of ['직접기초', '말뚝기초', '현장타설말뚝']) {
+      const model = buildPier({ ...loadP1(), type, columnCount, foundationType });
+      const record = { type, foundationType, columns: model.columns.length, footings: model.footings.length, piles: model.piles.length };
+      for (const [name, run] of Object.entries({ concrete: () => buildPierScene(model), rebar3d: () => buildRebar3D(model), summary: () => rebarSummary(model) })) {
+        try { run(); record[name] = { ok: true }; }
+        catch (error) { record[name] = { ok: false, message: error.message, stack: error.stack.split('\n').slice(0, 5) }; }
+      }
+      result.push(record);
+    }
+  }
+  await mkdir('.verify/cast-in-place-20261105', { recursive: true });
+  await writeFile('.verify/cast-in-place-20261105/diagnosis.json', JSON.stringify(result, null, 2));
+  console.table(result.map(({ type, foundationType, concrete, rebar3d, summary }) => ({ type, foundationType, concrete: concrete.ok, rebar3d: rebar3d.ok, summary: summary.ok })));
+} finally { await server.close(); }

scripts/diagnose-merge-drawing.mjs

@@ -0,0 +1,22 @@
+import { createServer } from 'vite';
+import { readFileSync } from 'node:fs';
+const server = await createServer({ server: { middlewareMode: true, hmr: false } });
+try {
+  const { buildPier } = await server.ssrLoadModule('/src/core/geometry.ts');
+  const { generateDrawing, DEFAULT_SETTINGS } = await server.ssrLoadModule('/도면작성/drawing.ts');
+  const {presentationEntities} = await server.ssrLoadModule('/도면작성/presentation.ts');
+  const {entityBox,viewCollisions,occupiedBounds} = await server.ssrLoadModule('/도면작성/occupancy.ts');
+  const {bearingDetail} = await server.ssrLoadModule('/도면작성/bearing-detail.ts');
+  const sample = JSON.parse(readFileSync('랜딩페이지/assets/samples/'+(process.argv[2]||'sample01.pzr.json'), 'utf8'));
+  const input = sample.piers[0].input;
+  const doc = generateDrawing(buildPier(input), input, sample.project, DEFAULT_SETTINGS);
+  console.log(JSON.stringify(doc.quality.issues.map(q => ({q, a:doc.views.find(v=>v.id===q.view)?.entities[q.first], b:doc.views.find(v=>v.id===q.view)?.entities[q.second]})), null, 2));
+  console.log(JSON.stringify(doc.views.map(v=>({id:v.id,scale:v.scale,slot:v.slot}))));
+  for(const q of doc.quality.issues.filter(q=>q.kind==='text-text'))console.log(JSON.stringify(presentationEntities(doc.views.find(v=>v.id===q.view)).filter(p=>p.entity.kind==='text'&&[q.first,q.second].includes(p.index)).map(p=>({entity:p.entity,box:entityBox(p.entity)}))));
+  for(const scale of [50,75,100,125,150,200,250,300]){
+    const {entities}=bearingDetail(buildPier(input),scale);
+    for(const e of entities){if(e.kind==='dimension')e.height=3*scale;if(e.kind==='text')e.height=Math.max(e.height,2.5*scale);}
+    const v={id:'detail',entities,scale},b=occupiedBounds(v);
+    console.log(JSON.stringify({scale,width:(b.maxX-b.minX)/scale,issues:viewCollisions(v).map(q=>({a:entities[q.first],b:entities[q.second]}))}));
+  }
+} finally { await server.close(); }

scripts/inspect-design-system-artifact.cjs

@@ -0,0 +1,52 @@
+// Read the user's linked artifact in an isolated browser profile, without changing its content.
+const fs = require('node:fs');
+const path = require('node:path');
+const out = path.resolve(__dirname, '../.verify/design-system-artifact-20261105');
+fs.mkdirSync(out, { recursive: true });
+async function inspect(target, name, screenshot) {
+  const ws = new WebSocket(target.webSocketDebuggerUrl);
+  await new Promise((resolve, reject) => { ws.onopen = resolve; ws.onerror = reject; });
+  let seq = 0;
+  const pending = new Map();
+  ws.onmessage = ({ data }) => {
+    const message = JSON.parse(data);
+    const wait = pending.get(message.id);
+    if (!wait) return;
+    clearTimeout(wait.timer); pending.delete(message.id);
+    if (message.error) wait.reject(new Error(JSON.stringify(message.error))); else wait.resolve(message.result);
+  };
+  const send = (method, params = {}) => new Promise((resolve, reject) => {
+    const id = ++seq;
+    const timer = setTimeout(() => { pending.delete(id); reject(new Error(`Timeout ${method}`)); }, 15000);
+    pending.set(id, { resolve, reject, timer });
+    ws.send(JSON.stringify({ id, method, params }));
+  });
+  try {
+    await send('Runtime.enable');
+    if (screenshot) {
+      await send('Page.enable');
+      await send('Emulation.setDeviceMetricsOverride', { width: 1600, height: 1000, deviceScaleFactor: 1, mobile: false });
+      await new Promise((resolve) => setTimeout(resolve, 6000));
+    }
+    const text = await send('Runtime.evaluate', { expression: 'document.body.innerText', returnByValue: true });
+    const html = await send('Runtime.evaluate', { expression: 'document.documentElement.outerHTML', returnByValue: true });
+    const frames = await send('Runtime.evaluate', { expression: '[...document.querySelectorAll("iframe")].map(f=>({src:f.src,title:f.title,srcdocLength:f.srcdoc.length}))', returnByValue: true });
+    fs.writeFileSync(path.join(out, `${name}.txt`), text.result?.value || '');
+    fs.writeFileSync(path.join(out, `${name}.html`), html.result?.value || '');
+    fs.writeFileSync(path.join(out, `${name}-frames.json`), JSON.stringify(frames.result?.value, null, 2));
+    console.log(JSON.stringify({ name, title: target.title, url: target.url, text: (text.result?.value || '').slice(0, 10000), frames: frames.result?.value }));
+    if (screenshot) {
+      const shot = await send('Page.captureScreenshot', { format: 'png' });
+      fs.writeFileSync(path.join(out, 'overview.png'), Buffer.from(shot.data, 'base64'));
+    }
+  } finally { ws.close(); }
+}
+(async () => {
+  let targets = await (await fetch('http://127.0.0.1:9444/json')).json();
+  const page = targets.find((target) => target.type === 'page' && target.url.includes('9LPwY9MMugHfvF5auhpVW2'));
+  if (!page) throw new Error('Linked artifact page not found');
+  await inspect(page, 'page', true);
+  targets = await (await fetch('http://127.0.0.1:9444/json')).json();
+  let index = 0;
+  for (const target of targets.filter((target) => target.type === 'iframe')) await inspect(target, `frame-${++index}`, false);
+})().catch((error) => { console.error(error); process.exitCode = 1; });

scripts/inspect-unified-ui.cjs

@@ -0,0 +1,21 @@
+// Read focused-control and native-menu behaviour in the last verification tab.
+const fs = require('node:fs');
+const path = require('node:path');
+(async () => {
+  const pages = await (await fetch('http://127.0.0.1:9444/json/list')).json();
+  const page = pages.find(p=>p.url==='http://127.0.0.1:5173/');
+  const ws = new WebSocket(page.webSocketDebuggerUrl);
+  await new Promise(r=>ws.onopen=r);
+  let seq=0; const pending=new Map();
+  ws.onmessage=({data})=>{const m=JSON.parse(data);if(pending.has(m.id)){pending.get(m.id)(m.result);pending.delete(m.id);}};
+  const send=(method,params={})=>new Promise(r=>{const id=++seq;pending.set(id,r);ws.send(JSON.stringify({id,method,params}));});
+  const ev=async expression=>(await send('Runtime.evaluate',{expression,returnByValue:true})).result.value;
+  const inspect=`({open:document.getElementById('file-menu').open,active:document.activeElement.outerHTML,summaryTab:document.querySelector('#file-menu summary').tabIndex})`;
+  const result={before:await ev(inspect)};
+  await ev(`document.querySelector('#file-menu summary').focus()`);
+  await send('Input.dispatchKeyEvent',{type:'keyDown',key:'Enter',code:'Enter',text:'\r',windowsVirtualKeyCode:13});
+  await send('Input.dispatchKeyEvent',{type:'keyUp',key:'Enter',code:'Enter',windowsVirtualKeyCode:13});
+  result.after=await ev(inspect);
+  fs.writeFileSync(path.resolve(__dirname,'../.verify/unified-input-20261106/keyboard-diagnosis.json'),JSON.stringify(result,null,2));
+  console.log(result);ws.close();
+})().catch(e=>{console.error(e);process.exitCode=1;});

scripts/landing-ground-treatment.ts

@@ -0,0 +1,57 @@
+import * as THREE from 'three';
+
+/** Rounded capture footprint; the underlying survey grid remains untouched. */
+export function roundedTerrainPlanes(axis: THREE.Vector3, start: number, end: number, halfWidth: number, radius: number) {
+  const lateral = new THREE.Vector3(-axis.z, 0, axis.x);
+  const corners = [[end-radius,halfWidth-radius,0],[start+radius,halfWidth-radius,90],[start+radius,-halfWidth+radius,180],[end-radius,-halfWidth+radius,270]];
+  const points: [number,number][]=[];
+  for(const [s,t,angle] of corners) for(let i=0;i<=8;i++) {
+    const a=(angle+i*90/8)*Math.PI/180;
+    points.push([s+radius*Math.cos(a),t+radius*Math.sin(a)]);
+  }
+  return points.map((p,i)=>{
+    const q=points[(i+1)%points.length],ds=q[0]-p[0],dt=q[1]-p[1];
+    const normal=axis.clone().multiplyScalar(-dt).addScaledVector(lateral,ds).normalize();
+    const origin=axis.clone().multiplyScalar(p[0]).addScaledVector(lateral,p[1]);
+    return new THREE.Plane(normal,-normal.dot(origin));
+  });
+}
+
+/** Landing-only road ribbons, joining the photographed road to ground at each abutment. */
+export function buildRoadExtensions(terrain: THREE.Mesh, anchors: {name:string;kind:string;point:THREE.Vector3}[], axis: THREE.Vector3, top: number) {
+  const piers=anchors.filter(a=>a.kind==='pier').toSorted((a,b)=>a.point.dot(axis)-b.point.dot(axis));
+  const abuts=anchors.filter(a=>a.kind==='abutment').toSorted((a,b)=>a.point.dot(axis)-b.point.dot(axis));
+  if(piers.length<2||abuts.length!==2)throw new Error('Road extensions require two abutments and at least two piers');
+  const group=new THREE.Group();group.name='landing-road-extensions';
+  const ray=new THREE.Raycaster(),down=new THREE.Vector3(0,-1,0),widthM=8;
+  const sample=(x:number,z:number)=>{
+    ray.set(new THREE.Vector3(x,top+100,z),down);
+    return ray.intersectObject(terrain,false)[0]?.point;
+  };
+  const descriptions=[];
+  const ends=[{name:'A1–P1',points:[abuts[0].point,piers[0].point,piers[1].point],from:0,to:.58},
+    {name:'P6–A2',points:[piers.at(-2)!.point,piers.at(-1)!.point,abuts[1].point],from:.42,to:1}];
+  for(const end of ends){
+    const curve=new THREE.CatmullRomCurve3(end.points.map(p=>new THREE.Vector3(p.x,0,p.z)),false,'catmullrom',.2);
+    const steps=80,positions:number[]=[],colors:number[]=[],indices:number[]=[];
+    let previous=-1,validSections=0,missingSections=0;
+    for(let i=0;i<=steps;i++){
+      const t=i/steps,u=end.from+(end.to-end.from)*t,p=curve.getPoint(u),tangent=curve.getTangent(u).normalize();
+      const cross=new THREE.Vector3(-tangent.z,0,tangent.x);
+      const offsets=Array.from({length:17},(_,j)=>-widthM/2+widthM*j/16);
+      const hits=offsets.map(o=>sample(p.x+cross.x*o,p.z+cross.z*o));
+      if(hits.some(h=>!h)){previous=-1;missingSections++;continue;}
+      const first=positions.length/3;
+      const blend=end.from===0?1-THREE.MathUtils.smoothstep(t,.72,1):THREE.MathUtils.smoothstep(t,0,.28);
+      const color=new THREE.Color('#dcd8c7').multiplyScalar(1+Math.sin(i*2.33)*.018);
+      hits.forEach((hit,j)=>{positions.push(hit!.x,hit!.y+.15,hit!.z);colors.push(color.r,color.g,color.b,blend*(j===0||j===offsets.length-1?0:.96));});
+      if(previous>=0)for(let j=0;j<offsets.length-1;j++)indices.push(previous+j,first+j,previous+j+1,previous+j+1,first+j,first+j+1);
+      previous=first;validSections++;
+    }
+    const geometry=new THREE.BufferGeometry();geometry.setAttribute('position',new THREE.Float32BufferAttribute(positions,3));geometry.setAttribute('color',new THREE.Float32BufferAttribute(colors,4));geometry.setIndex(indices);geometry.computeVertexNormals();
+    const mesh=new THREE.Mesh(geometry,new THREE.MeshBasicMaterial({vertexColors:true,side:THREE.DoubleSide,transparent:true,depthWrite:false,polygonOffset:true,polygonOffsetFactor:-2,polygonOffsetUnits:-2}));
+    mesh.name=end.name;mesh.renderOrder=2;group.add(mesh);
+    descriptions.push({name:end.name,widthM,validSections,missingSections,triangles:indices.length/3,visualizationOnly:true});
+  }
+  return {group,descriptions};
+}

scripts/landing-smooth-outline.ts

@@ -0,0 +1,48 @@
+/** Capture-only silhouette trimming. Samples real alpha; never fills missing survey data. */
+export function smoothLandingOutline(source: HTMLCanvasElement, terrain: HTMLCanvasElement, preserveExposedStructures = false) {
+  const width=source.width,height=source.height,scale=width/2172;
+  const alpha=terrain.getContext('2d')!.getImageData(0,0,width,height).data;
+  const tops:number[]=[],bottoms:number[]=[];
+  for(let x=0;x<width;x++) {
+    let top=height,bottom=-1;
+    for(let y=0;y<height;y++)if(alpha[(y*width+x)*4+3]>240){top=Math.min(top,y);bottom=y;}
+    tops.push(top);bottoms.push(bottom);
+  }
+  const support=tops.map((top,x)=>bottoms[x]-top>60*scale?x:-1).filter(x=>x>=0);
+  if(!support.length)throw new Error('No continuous terrain silhouette');
+  const left=support[0]+Math.ceil(12*scale),right=support.at(-1)!-Math.ceil(12*scale);
+  const inset=Math.ceil(4*scale),radius=Math.ceil(18*scale),average=Math.ceil(8*scale);
+  const eroded=(values:number[],upper:boolean)=>values.map((_,x)=>{
+    const local=values.slice(Math.max(0,x-radius-average),Math.min(width,x+radius+average+1));
+    return (upper?Math.max(...local):Math.min(...local))+(upper?inset:-inset);
+  });
+  const upper=eroded(tops,true),lower=eroded(bottoms,false);
+  const mean=(values:number[],x:number)=>{
+    const samples=values.slice(Math.max(0,x-average),Math.min(width,x+average+1));
+    return samples.reduce((a,b)=>a+b,0)/samples.length;
+  };
+  const points:[number,number][]=[];
+  const cap=Math.ceil(24*scale),step=Math.ceil(12*scale);
+  for(let x=left+cap;x<=right-cap;x+=step)points.push([x,mean(upper,x)]);
+  points.push([right-cap,mean(upper,right-cap)],[right,mean(upper,right-cap)+cap],[right,mean(lower,right-cap)-cap],[right-cap,mean(lower,right-cap)]);
+  for(let x=right-cap-step;x>=left+cap;x-=step)points.push([x,mean(lower,x)]);
+  points.push([left+cap,mean(lower,left+cap)],[left,mean(lower,left+cap)-cap],[left,mean(upper,left+cap)+cap],[left+cap,mean(upper,left+cap)]);
+  const mid=(a:[number,number],b:[number,number])=>[(a[0]+b[0])/2,(a[1]+b[1])/2];
+  const first=mid(points.at(-1)!,points[0]);
+  let path=`M${first[0]} ${first[1]}`;
+  points.forEach((p,i)=>{const next=mid(p,points[(i+1)%points.length]);path+=`Q${p[0]} ${p[1]} ${next[0]} ${next[1]}`;});path+='Z';
+  const canvas=document.createElement('canvas');canvas.width=width;canvas.height=height;
+  const ctx=canvas.getContext('2d')!;ctx.drawImage(source,0,0);
+  const original=ctx.getImageData(0,0,width,height).data;
+  ctx.globalCompositeOperation='destination-in';ctx.fill(new Path2D(path));
+  const outputImage=ctx.getImageData(0,0,width,height),output=outputImage.data;
+  // A cutaway may expose piles beyond the terrain silhouette. Preserve their rendered pixels.
+  if(preserveExposedStructures){
+    for(let i=0;i<alpha.length;i+=4)if(alpha[i+3]===0&&original[i+3]>0)output.set(original.subarray(i,i+4),i);
+    ctx.putImageData(outputImage,0,0);
+  }
+  // Compare to terrain alpha only: smoothing should remove its rough border, not invent pixels.
+  let before=0,after=0,addedPixels=0;
+  for(let i=3;i<alpha.length;i+=4){if(alpha[i]>240){before++;if(output[i]>240)after++;}if(original[i]===0&&output[i]>0)addedPixels++;}
+  return {canvas,metadata:{method:'inward-alpha-envelope-quadratic',path,retainedTerrainRatio:after/before,addedOutsideSourcePixels:addedPixels}};
+}

scripts/promote-landing-hero.py

@@ -0,0 +1,30 @@
+"""Promote one rendered camera variant; preserve the previous landing image."""
+import json
+import shutil
+import sys
+from pathlib import Path
+
+root = Path(__file__).resolve().parents[1]
+assets = root / '랜딩페이지/assets'
+variant = sys.argv[1] if len(sys.argv) > 1 else 'horizontal-smooth'
+if variant not in ('balanced', 'low', 'high', 'trim30', 'trim20', 'refined', 'horizontal-smooth'):
+    raise SystemExit('Unknown camera variant')
+source = root / ('.verify/landing-horizontal-20261109' if variant == 'horizontal-smooth' else '.verify/landing-hero-20261109')
+metadata = json.loads((source / f'{variant}.json').read_text())
+if variant == 'horizontal-smooth':
+    assert metadata['along'] == 0 and metadata['outline']['addedOutsideSourcePixels'] == 0
+    assert metadata['piers'] == 6 and metadata['abutments'] == 2
+    # Full curve control points remain in the capture audit, outside the service bundle.
+    metadata['outline'].pop('path')
+backup = source / ('before-horizontal' if variant == 'horizontal-smooth' else 'before-refined' if variant == 'refined' else 'before-trim30')
+backup.mkdir(exist_ok=True)
+for name in ('okseong-model-hero.png', 'okseong-model-hero.webp', 'okseong-hero-capture.ts'):
+    if (assets / name).exists() and not (backup / name).exists():
+        shutil.copyfile(assets / name, backup / name)
+for kind in ('png', 'webp'):
+    shutil.copyfile(source / f'{variant}.{kind}', assets / f'okseong-model-hero.{kind}')
+metadata['terrainFlow'] = [None if p is None else {'x': p['x'], 'y': p['y']} for p in metadata['terrainFlow']]
+(assets / 'okseong-hero-capture.ts').write_text(
+    '// Generated by scripts/promote-landing-hero.py from actual model projection.\n'
+    'export const heroCapture = ' + json.dumps(metadata, ensure_ascii=False, indent=2) + ' as const;\n'
+)