ahnyongjooandClaude Sonnet 5.5
964a841de1
- Code\rebar_pipeline, review_pipeline, pier-program을 정션에서 실제 폴더로 전환 - Code\rhino_mcp 및 CLAUDE_rhino배경.md 추가, .mcp.json은 PYTHONPATH로 새 위치 사용 - pier-program 내부 .git 제거(이력은 backup\pier-program_20261028.bundle에 보관) - worktree 가이드 반영(CLAUDE.local.md, HANDOFF.md) - D:\Rhino-MCP 경로 참조를 새 위치로 치환 Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
38 lines
2.0 KiB
Python
38 lines
2.0 KiB
Python
"""Debug (2026-10-13): build the tapered coping pieces step by step and report validity / boolean results.
|
|
Run through the app runner: python -c "..." (see tools usage in the session log)."""
|
|
import json
|
|
import math
|
|
|
|
import Rhino.Geometry as rg
|
|
|
|
P = json.load(open(PARAMS_PATH, encoding="utf-8"))
|
|
c = P["coping"]
|
|
TOL = 0.01
|
|
out = {}
|
|
w, R, L0, z_tip = c["width_y"], c["plan_corner_radius"], c["plan_length"], c["z_tip"]
|
|
zmin = min(z for _, z in c["profile_xz"])
|
|
trap = [(-1250, zmin), (1250, zmin), (L0 / 2, z_tip), (-L0 / 2, z_tip)]
|
|
prof = rg.PolylineCurve([rg.Point3d(x, -w / 2, z) for x, z in trap + trap[:1]])
|
|
srf = rg.Surface.CreateExtrusion(prof, rg.Vector3d(0, w, 0))
|
|
low = srf.ToBrep().CapPlanarHoles(TOL)
|
|
out["lower"] = dict(valid=low.IsValid, solid=low.IsSolid, orient=str(low.SolidOrientation),
|
|
vol=rg.VolumeMassProperties.Compute(low).Volume if low.IsSolid else None)
|
|
if low.SolidOrientation == rg.BrepSolidOrientation.Inward:
|
|
low.Flip()
|
|
cx, cy = L0 / 2 - R, w / 2 - R
|
|
blk = rg.Box(rg.BoundingBox(cx, cy, zmin - 100, cx + R + 100, cy + R + 100, z_tip + 100)).ToBrep()
|
|
cyl = rg.Cylinder(rg.Circle(rg.Plane(rg.Point3d(cx, cy, zmin - 200), rg.Vector3d.ZAxis), R), z_tip - zmin + 400).ToBrep(True, True)
|
|
waste = rg.Brep.CreateBooleanDifference(blk, cyl, TOL)
|
|
out["waste"] = dict(n=len(waste) if waste else 0, valid=[b.IsValid for b in waste] if waste else None,
|
|
solid=[b.IsSolid for b in waste] if waste else None)
|
|
if waste:
|
|
d1 = rg.Brep.CreateBooleanDifference(low, waste[0], TOL)
|
|
out["low_minus_one"] = dict(n=len(d1) if d1 else 0)
|
|
inter = rg.Brep.CreateBooleanIntersection(low, waste[0], TOL)
|
|
out["low_and_one"] = dict(n=len(inter) if inter else 0,
|
|
vol=[rg.VolumeMassProperties.Compute(b).Volume for b in inter] if inter else None)
|
|
x = rg.Intersect.Intersection.BrepBrep(low, waste[0], TOL)
|
|
out["brepbrep"] = dict(ok=x[0], curves=len(x[1]), pts=len(x[2]))
|
|
json.dump(out, open(OUT_PATH, "w"), indent=1, default=str)
|
|
print(json.dumps(out, default=str))
|