ypshimandClaude Opus 5.5
55b679932e
- 삽도 2개 (src/view/abut-wall-svg.ts): 교대축 직각 단면(① 구간, "300 + 500 + 1600 = 2400", 흉벽 상단·브라켓 상면·교좌면·저판 EL)과 정면·배면도(교좌면 계단, 흉벽 상단 경사, 받침, 수축줄눈). 생성본 값, 가로·세로 같은 축척 - 벽체 두께는 자동 (= 브라켓 폭 + 흉벽 두께 + 교좌면 폭). 입력은 브라켓 폭(기본 300). 예전 저장 파일의 벽체 두께는 브라켓 폭으로 바꿔 읽음 (normalizeShape) - 인접 무시 기준(기본 5 mm) 입력: 이웃 받침의 교좌면 EL 차이가 이 값보다 작으면 한 구간으로 묶음 (A1 단차 71 mm, 변화 없음) - 카드 구성: 벽체 형식(기본형만, QA-8) → 삽도 → 입력 격자(시안 순서, QA-4 표시) → 자동 값(벽체 두께, 흉벽 상단 IP3/IP1, 교대축) → 구간 표 → 확인 필요 → 시안 메모 - 저판·말뚝 입력 5개를 새 "확대기초 · 말뚝" 카드로 분리. 부재 목록 6행(시안 순서), 변경 표시도 카드별로 나눔 - 테스트 갱신·추가. 전체 655건 통과, 타입 검사·빌드 통과. 브라우저 시각 확인은 미실시 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
87 lines
5.1 KiB
TypeScript
87 lines
5.1 KiB
TypeScript
import { describe, expect, it } from 'vitest';
|
||
import { ABUT_SHAPE_DEFAULT, normalizeShape, resolveShape, shapeIssues, wallThicknessMm, type AbutShape } from '../src/core/abut/shape';
|
||
|
||
describe('교대 형상 입력 (시안 ② 벽체·흉벽 · 확대기초·말뚝)', () => {
|
||
it('the defaults equal the spec values (wall +1.6 … −0.8, footing +2.8 … −1.8, piles 650 / 2000)', () => {
|
||
const r = resolveShape();
|
||
expect(r.wallFrontM).toBeCloseTo(1.6, 9);
|
||
expect(r.wallBackM).toBeCloseTo(-0.8, 9);
|
||
expect(r.parapetBackM).toBeCloseTo(-0.5, 9);
|
||
expect(r.footingFrontM).toBeCloseTo(2.8, 9);
|
||
expect(r.footingBackM).toBeCloseTo(-1.8, 9);
|
||
expect(r.pileEdgeM).toBeCloseTo(0.65, 9);
|
||
expect(shapeIssues({})).toEqual([]);
|
||
expect(ABUT_SHAPE_DEFAULT.bracketWidthMm).toBe(300);
|
||
expect(wallThicknessMm(ABUT_SHAPE_DEFAULT)).toBe(2400); // 300 + 500 + 1600 (자동)
|
||
});
|
||
|
||
it('a changed 브라켓 폭 moves the back face; an old saved 벽체 두께 still opens as the same wall', () => {
|
||
expect(resolveShape({ bracketWidthMm: 0 }).wallBackM).toBeCloseTo(-0.5, 9);
|
||
expect(normalizeShape({ wallThicknessMm: 2000 } as Partial<AbutShape>)).toEqual({ bracketWidthMm: -100 });
|
||
expect(resolveShape({ wallThicknessMm: 2000 } as Partial<AbutShape>).wallBackM).toBeCloseTo(-0.4, 9);
|
||
});
|
||
|
||
it('refuses a footing that does not cover the wall, and non-positive sizes', () => {
|
||
expect(shapeIssues({ footingBackMm: -500 }).join(' ')).toContain('뒷굽');
|
||
expect(shapeIssues({ footingFrontMm: 1000 }).join(' ')).toContain('앞굽');
|
||
expect(shapeIssues({ bracketWidthMm: -1 }).join(' ')).toContain('브라켓 폭');
|
||
expect(shapeIssues({ seatStepIgnoreMm: -1 }).join(' ')).toContain('인접 무시 기준');
|
||
expect(shapeIssues({ pileSpacingMm: 0 }).join(' ')).toContain('말뚝');
|
||
});
|
||
});
|
||
|
||
import { readFileSync } from 'node:fs';
|
||
import { fileURLToPath } from 'node:url';
|
||
import * as XLSX from 'xlsx';
|
||
import { applyShapeEdit, SHAPE_EDIT_FIELDS } from '../src/core/abut/edit';
|
||
import { buildAbut } from '../src/core/abut/geometry';
|
||
import { buildMembers } from '../src/core/abut/members';
|
||
import { parseAbutments } from '../src/core/abut/parse';
|
||
|
||
const RAG = fileURLToPath(new URL('../../../RAG/운곡교P1입력.xlsx', import.meta.url));
|
||
const rec = parseAbutments(XLSX.read(readFileSync(RAG), { type: 'buffer' })).abutments[0];
|
||
|
||
describe('형상 입력이 계산에 반영됨 (시안 ② 카드)', () => {
|
||
it('the card has one field per shape value, in the mockup order', () => {
|
||
expect(SHAPE_EDIT_FIELDS.map((f) => f.key)[0]).toBe('wallFrontMm');
|
||
expect(SHAPE_EDIT_FIELDS).toHaveLength(14);
|
||
expect(SHAPE_EDIT_FIELDS.filter((f) => f.group === 'footing').map((f) => f.key)).toEqual(['footingThicknessMm', 'footingFrontMm', 'footingBackMm', 'pileEdgeMm', 'pileSpacingMm']);
|
||
});
|
||
|
||
it('the new drawing values do not change the geometry (the model ignores them)', () => {
|
||
expect(resolveShape({ shrinkJointCount: 3, parapetLevelLeftMm: 800 })).toEqual(resolveShape());
|
||
});
|
||
|
||
it('the shrink-joint count must be a whole number, not negative', () => {
|
||
expect(shapeIssues({ shrinkJointCount: 1.5 }).join(' ')).toContain('수축줄눈');
|
||
expect(shapeIssues({ shrinkJointCount: -1 }).join(' ')).toContain('수축줄눈');
|
||
expect(shapeIssues({ shrinkJointCount: 0 })).toEqual([]);
|
||
});
|
||
|
||
it('a footing that does not cover the wall is refused by the edit rule', () => {
|
||
expect(() => applyShapeEdit(rec, 'footingBackMm', -500)).toThrow('뒷굽');
|
||
expect(rec.shape).toBeUndefined();
|
||
});
|
||
|
||
it('a changed footing thickness moves the footing top used by the walls', () => {
|
||
const edited = applyShapeEdit(rec, 'footingThicknessMm', 1300);
|
||
const model = buildAbut({ name: 'A1', type: 'A1', seatEl: rec.seatEl, ip1: rec.ip1, ip2: rec.ip2, ip3: rec.ip3, bearings: rec.bearings.map((b) => ({ no: b.no, pos: b.pos, z: b.z, seatEl: b.seatEl })) });
|
||
const base = buildMembers(model, { bottomEl: rec.foundationBottomEl, pileLengthMm: rec.pileLengthMm });
|
||
const more = buildMembers(model, { bottomEl: rec.foundationBottomEl, pileLengthMm: rec.pileLengthMm }, edited.shape);
|
||
expect(more.footingTopEl - base.footingTopEl).toBeCloseTo(0.2, 6);
|
||
});
|
||
|
||
it('a changed pile spacing changes the number of piles per row', () => {
|
||
const model = buildAbut({ name: 'A1', type: 'A1', seatEl: rec.seatEl, ip1: rec.ip1, ip2: rec.ip2, ip3: rec.ip3, bearings: rec.bearings.map((b) => ({ no: b.no, pos: b.pos, z: b.z, seatEl: b.seatEl })) });
|
||
const wider = buildMembers(model, {}, { pileSpacingMm: 3000 });
|
||
expect(wider.piles[0].s.length).toBeLessThan(6);
|
||
});
|
||
|
||
it('인접 무시 기준: steps smaller than the value join one segment (A1 steps are 71 mm)', () => {
|
||
const model = buildAbut({ name: 'A1', type: 'A1', seatEl: rec.seatEl, ip1: rec.ip1, ip2: rec.ip2, ip3: rec.ip3, bearings: rec.bearings.map((b) => ({ no: b.no, pos: b.pos, z: b.z, seatEl: b.seatEl })) });
|
||
const foundation = { bottomEl: rec.foundationBottomEl, pileLengthMm: rec.pileLengthMm };
|
||
expect(buildMembers(model, foundation).wallSegments).toHaveLength(5);
|
||
expect(buildMembers(model, foundation, { seatStepIgnoreMm: 100 }).wallSegments).toHaveLength(1);
|
||
});
|
||
});
|