ypshimandClaude Haiku 5.5
496e0ea4e5
- 기본 '이음 무시' (사양 결정). '반영'이면 정척(12000) 초과 철근을 l_s 겹침 2조각으로 나눔 - 위치: 기둥 중심 = 전체의 절반, 단부 = 정척 안에서 가장 끝 쪽 (짧은 조각 = 전체 + l_s − 12000, 긴 조각 = 12000) - 철근표 조각 목록과 비고, 3D 두 조각(l_s 겹침)에 반영 - STANDARD_BAR를 common.ts로 옮겨 순환 import 방지 Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
93 lines
4.1 KiB
TypeScript
93 lines
4.1 KiB
TypeScript
import type { PierInput } from './types';
|
|
|
|
/**
|
|
* Inputs the user can change on the 2단계 cards (spec §5.2 · plan C2). Each one maps to a field of PierInput.
|
|
* Extend this list as more cards are enabled; the tracking below works on any of these keys.
|
|
*/
|
|
export const EDITABLE_FIELDS = [
|
|
{ key: 'copingWidthMm', label: '코핑 폭 B', unit: 'mm' },
|
|
{ key: 'copingLengthMm', label: '코핑 길이 L', unit: 'mm' },
|
|
{ key: 'columnDiameterMm', label: '기둥 직경 D', unit: 'mm' },
|
|
{ key: 'footingLengthMm', label: '확대기초 길이 L', unit: 'mm' },
|
|
{ key: 'footingWidthMm', label: '확대기초 폭 W', unit: 'mm' },
|
|
{ key: 'footingHeightMm', label: '확대기초 높이 h1', unit: 'mm' },
|
|
{ key: 'blindingMarginMm', label: '비림 여유 (한쪽)', unit: 'mm' },
|
|
{ key: 'blindingThicknessMm', label: '비림 두께', unit: 'mm' },
|
|
{ key: 'pileOuterMm', label: '말뚝 외경 D', unit: 'mm' },
|
|
{ key: 'pileThicknessMm', label: '말뚝 두께 t', unit: 'mm' },
|
|
{ key: 'copingH1Mm', label: '끝단 높이 h1', unit: 'mm' },
|
|
{ key: 'copingH2Mm', label: '테이퍼 높이 h2', unit: 'mm' },
|
|
{ key: 'levelWidthMm', label: 'Level 폭', unit: 'mm' },
|
|
{ key: 'pileLengthMm', label: '말뚝 길이', unit: 'mm' },
|
|
{ key: 'groundEl', label: '지반고 EL', unit: 'm' },
|
|
] as const;
|
|
|
|
/** Inputs tracked for overrides and pending changes: the numeric cards plus 열별 본수 (an array, compared by value). */
|
|
export const TRACKED_KEYS = [...EDITABLE_FIELDS.map((f) => f.key), 'pileRows', 'groundPosition', 'groundWaterOn', 'groundWaterEl', 'floodLevelEl', 'scourDepthM', 'highWaterEl', 'lowWaterEl', 'strataRows', 'bearingType', 'bearingLayout', 'blockRebar', 'copingRebar', 'topSplice'] as const;
|
|
|
|
export type EditableKey = (typeof TRACKED_KEYS)[number];
|
|
|
|
export const FIELD_LABELS: Record<EditableKey, string> = {
|
|
copingWidthMm: '코핑 폭 B',
|
|
copingLengthMm: '코핑 길이 L',
|
|
columnDiameterMm: '기둥 직경 D',
|
|
footingLengthMm: '확대기초 길이 L',
|
|
footingWidthMm: '확대기초 폭 W',
|
|
footingHeightMm: '확대기초 높이 h1',
|
|
blindingMarginMm: '비림 여유 (한쪽)',
|
|
blindingThicknessMm: '비림 두께',
|
|
pileOuterMm: '말뚝 외경 D',
|
|
pileThicknessMm: '말뚝 두께 t',
|
|
copingH1Mm: '끝단 높이 h1',
|
|
copingH2Mm: '테이퍼 높이 h2',
|
|
levelWidthMm: 'Level 폭',
|
|
pileLengthMm: '말뚝 길이',
|
|
groundEl: '지반고 EL',
|
|
pileRows: '열별 본수',
|
|
groundPosition: '지반 위치',
|
|
groundWaterOn: '지하수위 고려',
|
|
groundWaterEl: '지하수위 EL',
|
|
floodLevelEl: '설계홍수위 DHWL',
|
|
scourDepthM: '세굴 깊이',
|
|
highWaterEl: '고조위 HWL',
|
|
lowWaterEl: '저조위 LWL',
|
|
bearingType: '받침 종류·용량',
|
|
bearingLayout: '받침 배치',
|
|
blockRebar: '받침블럭 철근 설정',
|
|
copingRebar: '코핑 배근 입력',
|
|
topSplice: '상면 주철근 이음',
|
|
strataRows: '지층 행',
|
|
};
|
|
|
|
/** Keys whose values differ between two inputs. Arrays are compared by value. */
|
|
export function changedKeys(a: PierInput, b: PierInput): EditableKey[] {
|
|
return TRACKED_KEYS.filter((key) => JSON.stringify(a[key]) !== JSON.stringify(b[key]));
|
|
}
|
|
|
|
/**
|
|
* The three values a pier carries while it is edited (spec §5.5, plan B1):
|
|
* - defaults: the values as imported from the sheet (기본값, shown as "기본 3100").
|
|
* - input: the values the 3D model was generated from (생성본).
|
|
* - draft: the values the user currently has in the cards (현재 입력).
|
|
*/
|
|
export interface PierValues {
|
|
defaults: PierInput;
|
|
input: PierInput;
|
|
draft: PierInput;
|
|
}
|
|
|
|
/** Overrides: draft differs from the imported default (주황 표시, "변경 n건" in the card). */
|
|
export function overrideKeys(p: PierValues): EditableKey[] {
|
|
return changedKeys(p.defaults, p.draft);
|
|
}
|
|
|
|
/** Pending: draft differs from the generated model, so the 3D view is out of date (미반영 변경). */
|
|
export function pendingKeys(p: PierValues): EditableKey[] {
|
|
return changedKeys(p.input, p.draft);
|
|
}
|
|
|
|
/** Puts one field back to its imported default in the draft. */
|
|
export function revertDraft(p: PierValues, key: EditableKey): PierInput {
|
|
return { ...p.draft, [key]: p.defaults[key] };
|
|
}
|