- 기본 '이음 무시' (사양 결정). '반영'이면 정척(12000) 초과 철근을 l_s 겹침 2조각으로 나눔
- 위치: 기둥 중심 = 전체의 절반, 단부 = 정척 안에서 가장 끝 쪽 (짧은 조각 = 전체 + l_s − 12000, 긴 조각 = 12000)
- 철근표 조각 목록과 비고, 3D 두 조각(l_s 겹침)에 반영
- STANDARD_BAR를 common.ts로 옮겨 순환 import 방지
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- core/rebar/coping-settings.ts: 입력 정의, 기본값(코핑철근.md), 범위(코핑_입력범위_제안.md), 검사 함수
- 다리 수는 4·6·8 목록으로 두고 홀수는 CP02로 막음
- 값은 적용 버튼을 누를 때만 draft에 쓰고 다시 생성 (범위 밖이면 반영하지 않음)
- PierInput.copingRebar, 모델 copingRebar, 변경 추적 키 추가
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Six inputs with their ranges and P1 defaults; a change regenerates the pier.
- The 적용 블럭 line shows the blocks (분리 n개 or 일체 n쌍, 전체).
- view/block-rebar-svg.ts: the section C–C along the 교축 with the S2 dots, the
S1 lines and legs, and the dimensions (block widths, the S2 layout).
- 받침블럭 철근 설정 is tracked for changes (defaults vs the current draft).
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- PierInput.bearingLayout: 분리 (default) or 일체, tracked for changes.
- 일체 is selectable only when there is at least one pair and every pair is
within 100 mm; otherwise the chip is disabled with the reason.
- Validation: B01 (info) when 일체 is chosen and allowed, the block shape is
still the 분리 shape; B02 (warning) when it is not allowed and the model
falls back to 분리.
- The 일체 block shape (2500 × 1200) is not modelled yet.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- PierInput.bearingType: text, absent = 탄성받침. Tracked for changes, so it
can be reverted. Saved in the project; no rule yet, so it does not change the model.
- Shown on the ② bearing card above the 공통 규칙.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Rules confirmed (승인 2026-10-26): datum MSL; 고조위 HWL and 저조위 LWL as
two levels; 세굴 깊이 as for 하상; 파랑과 선박 하중 excluded from this scope.
- Checks: G13 levels missing, G10 해저면 not below 고조위, G11 저조위 not
below 고조위, G14 pile wall at or below the corrosion allowance reference.
- CORROSION_ALLOWANCE_MM = 1 is a PLACEHOLDER reference (not in the RAG
documents); the card and G14 mark it as to be confirmed.
- Card: the 해상 inputs; the section draws 고조위 (solid), 저조위 (dashed),
and labels the ground line 해저면 EL.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- shape-options: a per-option "confirmed" flag; 하상 is confirmed, 해상 is not.
- The 위치 chips store the choice in the pier's draft; 선택 shows it.
- 하상: the groundwater inputs give way to 설계홍수위 DHWL (floodLevelEl) and
세굴 깊이 (scourDepthM). The groundwater value is kept (남겨두기).
- Checks: G07 DHWL missing, G08 DHWL below the 지반고, G09 scour negative or
the scour line below the footing bottom. The groundwater check is skipped for 하상.
- Section: the DHWL as a solid line and the 세굴선 dashed.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- types/ground.ts: 위치 (육상·하상·해상), 지하수위 고려 and EL, 지층 행
(name and 하단 EL, from the top down). Checks G01 (layer order), G02 (water
level range), G03 (layer name).
- The 지반고 still feeds the soil cover check; the layer rows and water level
are inputs and do not change the 3D model.
- view/ground-svg.ts: the 삽도 drawn from the inputs and the generated
footings and piles on one EL scale.
- 일괄 적용 copies 위치 and 지하수위 to the checked piers (속성 복사 item,
off by default). Changes list shows arrays and booleans as text.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- ground-model.ts: read and check schema 1 of the Python ground model.
- ② 지반·지층 card: import the json, show the DTM value beside the excel
value, and apply it only when the user presses the button (tracked as an
override, revertible).
- groundEl becomes an editable, tracked input; the project file keeps the
imported model and checks it on open.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The footing card takes L, W, h1 (default 2000), the blinding margin on each side (100) and thickness (100). The pile is picked
from the 강관 or PHC list by outer diameter and wall; the inner diameter, area and weight are read from the list. Defaults are
the 1단계 constants, so P1 is unchanged. The model reads them (footing width, height, blinding, pile diameter; the footing
length for grouping). 복합 말뚝 and the rule-pending items stay disabled; the footing rebar is not yet tied to these
inputs (1·2단계 후).
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
D is an input on the column card (default 2000 mm). The 3D column, the piles of a cast-in pier and the column rebar follow it;
n_div stays 46. Three checks run on each regenerate and appear in 알림: D below the Level width (2100), D + 2c within the
coping width, and the 주철근 arc spacing ≥ max(1.5·d_b, 40). Spec §5.2 records the rule (approved 2026-10-23).
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The three values are inputs on the coping card, with the P1 values (1000 · 1500 · 2100) when absent, and they are tracked
like the other shape inputs. The geometry and the coping rebar read them from one CopingGeom: the U heights follow the
closed form (h1 − 2c) + h2·min(x_s, x_L0)/x_L0, which reproduces the P1 values. The side rows are assumed to keep their
position relative to the Level underside (명세 확인 필요). P1 results are unchanged; the full suite passes.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- A 열 is one row across the footing width; each has its own count along the
length. Default floor((L − 1400) / 2250) + 1 per 열, as in spec §4.6.
- Counts are validated: one per 열, whole numbers 2–30. Spacing below the
2250 mm minimum is shown as a warning, not refused (the plan's 6본 → 5@1800
example).
- PierInput gains an optional pileRows; absent means the defaults, so existing
files and the P1 results are unchanged.
- Change tracking compares arrays by value; 열별 본수 can be reverted and
copied (copy item off by default).
- The footing card has −/+ per 열 with spacing, total, and the display string.
- Tests: defaults 4열 × 5본 = 20 and the 1단계 text; 6본 → 5@1800; limits;
model-level 21 piles.
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Three values per pier: defaults (as imported), input (generated), draft
(current cards). Overrides = draft vs defaults; pending = draft vs input.
- Editable now: 코핑 폭, 코핑 길이, 말뚝 길이. Changing a card does not touch the
3D view until 다시 생성; the header and the card show 변경 n.
- Revert puts a field back to its imported default.
- Project files store defaults and draft (optional; v1 files still open).
- Tests: 코핑 폭 3100 → 3300 gives one override and one pending change;
regenerating clears pending but keeps the override; revert; file round trip.
- Not verified in a browser (no debuggable Chrome in this session).
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
