- build_solids.py: PAV/BASE/DRNL/DRNR/HBOX/IBOX are now built per pattern run
instead of 100 m chunks, so each solid carries its run's pattern and station range.
- Rebuilt GLB (326 geometries), meta and verify (320 solids, volume sum 12406.138 m3).
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A5Cun3RHQKna9qxE6ybZ4A
- scripts/build_solids.py: B-rep solids from standard section 03-001 (rev2, approved 2026-10-21)
- lining per 지보패턴 run (independently selectable), excavation band per run
- road surface (계획고, 280 mm) with per-station superelevation; base/invert ASSUMED
- side drains (box minus pipe), H/I boxes = 공동구 (assumed); 시설한계 50 mm as reference wires only
- staged run (4 GB RAM / 180 s per call); STEP and GLB from the same B-rep
- model/tunnel_solids.glb, model/tunnel_solids_meta.json, data/verify_solids.json
- viewer/index.html: solids, pattern and component toggles, click readout, no development text
- STEP (84.6 MB) and model/parts/ are git-ignored; the STEP is generated locally by the script
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A5Cun3RHQKna9qxE6ybZ4A
Source: RAG 지보패턴현황_20260918.xlsx, sheet 참고_지보패턴현황, 당진방향 table
(4+740..5+500, 42 contiguous rows). Lining pattern (M column) per station now
drives the lining colour and the viewer readout. Daesan table kept as reference
only (WL-4 there, not applied). Drawing patterns E-1, E-2, RP-2, WL-3 are in
neither table and stay [미확정].
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A5Cun3RHQKna9qxE6ybZ4A
Extracted per-sheet pattern groups (입출구부 50 m / 온도미고려), note-5 scope,
fck 27 MPa, SD400, aggregate 25 mm, rebar label counts and printed radii.
Model keeps R1 = 6,982 mm; lining sheets print 6.892 m -> [CONFLICT DETECTED]
for user check. Sheet-to-station and pattern-name mapping left [미확정].
Viewer shows the lining spec on click.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A5Cun3RHQKna9qxE6ybZ4A
No pattern-to-station data exists in the drawings. Per user decision
(2026-10-21) the modelled range 4+745..5+480 is split into 2 m segments with
arbitrary pattern names, marked placeholder in CSV, meta and viewer, to be
replaced later. Ring step reduced to 1 m so that the 2 m segments align.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A5Cun3RHQKna9qxE6ybZ4A
build_skeleton.py sweeps the confirmed standard section (R6982 inner, 300 mm
lining, R7402 excavation, crown 6.615 m above road) along the centreline for
4+745..5+480, road = 계획고, ground = 지반고 band. Walls and invert are
approximations and recorded in meta. Verified: inner radius identity, crown
height, chord length 799.9 m for 4+700..5+500. Viewer uses three.js 0.160.0.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A5Cun3RHQKna9qxE6ybZ4A
Claude