Pier_v1/tests/bearing-layout.test.ts

import { describe, expect, it } from 'vitest';
import { buildPier, type BlockModel } from '../src/core/geometry';
import { bearingEdgeDistances, integratedCheck, PAIR_ECCENTRICITY_LIMIT_MM, pairEccentricities } from '../src/core/bearing-layout';
import { validatePier } from '../src/core/validate';
import type { Issue } from '../src/core/types';
import { loadP1 } from './helpers';

const integrated = buildPier({ ...loadP1(), bearingLayout: '일체' });

const model = buildPier(loadP1());

function block(no: number, row: '전열' | '후열', s: number): BlockModel {
  return { no, row, s, n: 0, k: 0, g: 0, bottom: 0, top: 0, padTop: 0, rowSkewDeg: 0 } as BlockModel;
}

describe('받침 배치 규칙 (승인 2026-10-26)', () => {
  it('C4 and C5 from the block edges along the 교축: 분리 blocks are centred, so both are 600', () => {
    const d = bearingEdgeDistances(model);
    expect(d).toHaveLength(10);
    for (const x of d) {
      expect(x.leftMm).toBeCloseTo(600, 0);
      expect(x.rightMm).toBeCloseTo(600, 0);
    }
  });

  it('일체: the outer margins stay 600 (C4 of the front bearing, C5 of the back bearing)', () => {
    const d = bearingEdgeDistances(integrated);
    // The 2500 block is centred on the pair midpoint, so the outer margins are 601 (within the 5 mm drawing tolerance of 600).
    expect(d.find((x) => x.no === 1 && x.row === '전열')!.leftMm).toBeCloseTo(600, -1);
    expect(d.find((x) => x.no === 6 && x.row === '후열')!.rightMm).toBeCloseTo(600, -1);
    // the inner sides face the other bearing of the pair: no C4 or C5 there
    expect(d.find((x) => x.no === 1 && x.row === '전열')!.rightMm).toBeNull();
    expect(d.find((x) => x.no === 6 && x.row === '후열')!.leftMm).toBeNull();
  });

  it('the front and back bearings of one number are about 85 mm apart on P1, so 일체 is allowed', () => {
    const pairs = pairEccentricities(model.blocks);
    expect(pairs).toHaveLength(5);
    for (const p of pairs) {
      expect(p.eccentricityMm).toBeGreaterThan(80);
      expect(p.eccentricityMm).toBeLessThan(90);
      expect(p.allowed).toBe(true);
    }
  });

  it('an eccentricity above 100 mm forbids 일체 for that pair (분리 우선)', () => {
    expect(PAIR_ECCENTRICITY_LIMIT_MM).toBe(100);
    const pairs = pairEccentricities([block(1, '전열', 1.0), block(1, '후열', 1.12), block(2, '전열', 3), block(2, '후열', 3.09)]);
    expect(pairs.find((p) => p.frontNo === 1)!.allowed).toBe(false);
    expect(pairs.find((p) => p.frontNo === 2)!.allowed).toBe(true);
  });

  it('pairs by order within each row, so 전열 1 pairs with 후열 6 on P1 (numbers run on across the rows)', () => {
    const pairs = pairEccentricities(model.blocks);
    expect(pairs[0]).toMatchObject({ frontNo: 1, backNo: 6 });
  });

  it('a bearing left without a partner (the rows have different counts) is not paired', () => {
    expect(pairEccentricities([block(1, '전열', 1), block(2, '전열', 3), block(6, '후열', 1.05)])).toHaveLength(1);
  });
});

describe('일체 배치 선택 (승인 2026-10-26)', () => {
  it('P1 allows 일체 because every pair is within 100 mm', () => {
    expect(integratedCheck(model.blocks)).toEqual({ allowed: true, overLimit: [] });
  });

  it('one pair over the limit blocks 일체 and lists that pair', () => {
    const r = integratedCheck([block(1, '전열', 1.0), block(1, '후열', 1.12)]);
    expect(r.allowed).toBe(false);
    expect(r.overLimit.map((p) => p.frontNo)).toEqual([1]);
  });

  it('no pairs at all does not allow 일체', () => {
    expect(integratedCheck([]).allowed).toBe(false);
  });

  it('the model keeps 분리 for now and says so (B01); a 일체 that is not allowed is refused with B02', () => {
    const input = loadP1();
    const ok: Issue[] = [];
    validatePier({ ...input, bearingLayout: '일체' }, model, ok);
    expect(ok.map((i) => i.code)).toContain('B01');
    const bad: Issue[] = [];
    const fake = { ...model, blocks: [block(1, '전열', 1.0), block(1, '후열', 1.12)] } as unknown as typeof model;
    validatePier({ ...input, bearingLayout: '일체' }, fake, bad);
    expect(bad.map((i) => i.code)).toContain('B02');
  });
});