ahnyongjooandClaude Sonnet 5.5
964a841de1
- Code\rebar_pipeline, review_pipeline, pier-program을 정션에서 실제 폴더로 전환 - Code\rhino_mcp 및 CLAUDE_rhino배경.md 추가, .mcp.json은 PYTHONPATH로 새 위치 사용 - pier-program 내부 .git 제거(이력은 backup\pier-program_20261028.bundle에 보관) - worktree 가이드 반영(CLAUDE.local.md, HANDOFF.md) - D:\Rhino-MCP 경로 참조를 새 위치로 치환 Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
46 lines
4.8 KiB
Plaintext
46 lines
4.8 KiB
Plaintext
PASS A3 운곡교P1: same tables / rows
|
|
|
|
PASS A3 운곡교P1: no existing cell changed or lost []
|
|
|
|
added cells: [('C12', 'A', '12.228~3.151'), ('C13', 'A', '12.167~12.044')]
|
|
|
|
PASS A3 운곡교p2: same tables / rows
|
|
|
|
PASS A3 운곡교p2: no existing cell changed or lost []
|
|
|
|
added cells: [('C12', 'A', '12.228~3.151'), ('C13', 'A', '12.167~12.044')]
|
|
|
|
PASS A3 p2: C12 / C13 range text in column A [('C12', 'A', '12.228~3.151'), ('C13', 'A', '12.167~12.044')]
|
|
|
|
PASS A3 p2: nothing else added [('C12', 'A', '12.228~3.151'), ('C13', 'A', '12.167~12.044')]
|
|
|
|
PASS A3 산외교울산P1: same tables / rows
|
|
|
|
PASS A3 산외교울산P1: no existing cell changed or lost []
|
|
|
|
added cells: [('C7', 'B', '3.106~1.656'), ('C8', 'B', '3.184~3.054'), ('C9', 'B', '2.977~1.526'), ('C10', 'A', '9.570~3.393'), ('C11', 'A', '9.560~3.383'), ('C12', 'A', '8.974~8.666'), ('C13', 'A', '9.764~9.456')]
|
|
|
|
PASS A4 운곡교P1: expected / rebar_marks rows unchanged (166)
|
|
|
|
PASS A4 운곡교P1: params rows found, none differ (91) ['bearing_seats.bearings.A', 'bearing_seats.bearings.B', 'bearing_seats.bearings.el_x', 'bearing_seats.bearings.h1', 'bearing_seats.bearings.h2', 'sole_plates.h3', 'sole_plates.table.L', 'sole_plates.table.S', 'sole_plates.table.T', 'sole_plates.table.W']
|
|
|
|
PASS A4 운곡교p2: expected / rebar_marks rows unchanged (166)
|
|
|
|
PASS A4 운곡교p2: params rows found, none differ (91) ['bearing_seats.bearings.A', 'bearing_seats.bearings.B', 'bearing_seats.bearings.el_x', 'bearing_seats.bearings.h1', 'bearing_seats.bearings.h2', 'sole_plates.h3', 'sole_plates.table.L', 'sole_plates.table.S', 'sole_plates.table.T', 'sole_plates.table.W']
|
|
|
|
PASS A4 산외교울산P1: expected / rebar_marks rows unchanged (82)
|
|
|
|
PASS A4 산외교울산P1: params rows found, none differ (40) ['bearing_seats.bearings.A', 'bearing_seats.bearings.B', 'bearing_seats.bearings.el_x', 'bearing_seats.bearings.h1', 'bearing_seats.bearings.h2', 'sole_plates.table.L', 'sole_plates.table.S', 'sole_plates.table.T', 'sole_plates.table.W', 'sole_plates.table.h3']
|
|
|
|
PASS A4 mutation: only the two changed params cells differ [['bearing_seats', 'bearings', 6, 'h1'], ['sole_plates', 'table', 2, 'W']]
|
|
|
|
PASS A4 mutation: expected untouched by the params rows
|
|
|
|
PASS A4 apply restores exactly the original params
|
|
|
|
PASS A4 h3 common value proposed once (Ungok)
|
|
|
|
chain: -4575, 200, 70@125, 200
|
|
|
|
PASS A5 chain of P1 bottom_Y1.pos (73) expands to the same list 73
|
|
|
|
PASS A5 drawing notation
|
|
|
|
PASS A5 decimals kept
|
|
|
|
PASS A5 rejects '' 치수 사슬이 비어 있습니다
|
|
|
|
PASS A5 rejects 'a, 1' 치수 사슬 형식 오류: 'a' (첫 값은 시작 위치, 이후는 증분 또는 n@간격)
|
|
|
|
PASS A5 rejects '2@100' 치수 사슬 형식 오류: '2@100' (첫 값은 시작 위치, 이후는 증분 또는 n@간격)
|
|
|
|
PASS A5 rejects '0, 0@5' 치수 사슬 형식 오류: '0@5' (반복 횟수는 1 이상)
|
|
|
|
PASS A5 rejects '0, 3@x' 치수 사슬 형식 오류: '3@x' (첫 값은 시작 위치, 이후는 증분 또는 n@간격)
|
|
|
|
PASS A5 expand_chains nested / other dicts untouched
|
|
|
|
PASS A5 web save expands the chain to the same list (302, [-4625, -4375, -4125])
|
|
|
|
PASS A5 web rejects a bad chain, params unchanged
|
|
|
|
PASS A5 section page shows the chain hint
|
|
|
|
21A76: {'type': 'LINE', 'layer': 'CS-CONC-MAJR', 'handle': '21A76', 'values': {'start': [17334.4, 8115.6], 'end': [6984.4, 8115.6], 'length': 10350.0, 'dx': -10350.0, 'dy': 0.0, 'bbox': [[6984.4, 8115.6], [17334.4, 8115.6]], 'bbox_size': [10350.0, 0.0]}}
|
|
|
|
PASS A6 21A76 (footing, report: 10.350) found {'type': 'LINE', 'layer': 'CS-CONC-MAJR', 'handle': '21A76', 'values': {'start': [17334.4, 8115.6], 'end': [6984.4, 8115.6], 'length': 10350.0, 'dx': -10350.0, 'dy': 0.0, 'bbox': [[6984.4, 8115.6], [17334.4, 8115.6]], 'bbox_size': [10350.0, 0.0]}}
|
|
|
|
20E89: {'type': 'ARC', 'layer': 'CS-CONC-MAJR', 'handle': '20E89', 'values': {'centre': [19111.2, 6039.2], 'radius': 12000.0, 'start_angle': 93.592, 'end_angle': 119.187, 'arc_length': 5360.5, 'start_point': [18359.4, 18015.6], 'end_point': [13259.4, 16515.6], 'bbox': [[13259.4, 16515.6], [18359.4, 18015.6]], 'bbox_size': [5100.0, 1500.0]}}
|
|
|
|
PASS A6 20E89 (coping soffit arc, params R12,000) is an ARC R12000 {'type': 'ARC', 'layer': 'CS-CONC-MAJR', 'handle': '20E89', 'values': {'centre': [19111.2, 6039.2], 'radius': 12000.0, 'start_angle': 93.592, 'end_angle': 119.187, 'arc_length': 5360.5, 'start_point': [18359.4, 18015.6], 'end_point': [13259.4, 16515.6], 'bbox': [[13259.4, 16515.6], [18359.4, 18015.6
|
|
|
|
PASS A6 unknown handle -> None
|
|
|
|
PASS A6 web shows the object
|
|
|
|
PASS A6 web reports a missing handle
|
|
|
|
PASS A7 10 bearings: defaults unchanged
|
|
|
|
PASS A7 4 bearings: ids within 1..4 {'G1': ['BS04', 'BP03'], 'G2': ['P2', 'P3'], 'G3': ['B4', 'B9'], 'G4': ['C11', 'S1'], 'G5': ['BB04', 'SP04']}
|
|
|
|
PASS A7 pier override still wins
|
|
|
|
RESULT PASS
|
|
|