ypshimandClaude Haiku 5.5
802a1eab97
With this definition the drawing's coping top matches the model's coping top to within 1 mm on all ten bearings. The earlier 0.211 m offset came from reading EL.X as the solplate top, which was wrong. The reference table now uses EL.X − h1 − h2, and the check tests the match. Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
67 lines
2.8 KiB
TypeScript
67 lines
2.8 KiB
TypeScript
import { describe, expect, it } from 'vitest';
|
||
import { buildPier } from '../src/core/geometry';
|
||
import { BEARING_ELEVATION_REF, SOLPLATE_REF, SOLPLATE_T_RULE, solplateTs } from '../src/core/bearing-ref';
|
||
import { loadP1 } from './helpers';
|
||
|
||
describe('교량받침 reference (도면값, 읽기 전용, 1단계)', () => {
|
||
it('E = h1 + h2 + h3 + h4 on every row', () => {
|
||
for (const r of BEARING_ELEVATION_REF) expect(r.h1 + r.h2 + r.h3 + r.h4, `No ${r.no}`).toBe(r.E);
|
||
});
|
||
|
||
it('solplate L = A + 100 and W = B + 100 against the elevation row', () => {
|
||
BEARING_ELEVATION_REF.forEach((e, i) => {
|
||
expect(SOLPLATE_REF[i].L, `No ${e.no}`).toBe(e.A + 100);
|
||
expect(SOLPLATE_REF[i].W, `No ${e.no}`).toBe(e.B + 100);
|
||
});
|
||
});
|
||
|
||
it('T1 and T2 follow T ± L·|S|/2 on every row (the 검산 column)', () => {
|
||
for (const r of SOLPLATE_REF) {
|
||
const c = solplateTs(SOLPLATE_T_RULE, r.L, r.s);
|
||
expect(c.T1, `No ${r.no}`).toBe(r.T1);
|
||
expect(c.T2, `No ${r.no}`).toBe(r.T2);
|
||
}
|
||
});
|
||
|
||
it('the solplate tapers along the axis: T1 (−측) + T2 (+측) = 2·T, with T = 30 at the centre', () => {
|
||
for (const r of SOLPLATE_REF) {
|
||
expect(r.T, `No ${r.no}`).toBe(SOLPLATE_T_RULE);
|
||
expect(r.T1 + r.T2, `No ${r.no}`).toBe(2 * r.T);
|
||
expect(r.T1, `No ${r.no}`).toBeGreaterThan(r.T2);
|
||
}
|
||
});
|
||
|
||
it('EL.X = block top incl. the 50 mm mortar: coping top = EL.X − h1 − h2 matches the model on all ten bearings (within 2 mm)', () => {
|
||
const m = buildPier(loadP1());
|
||
const back = m.blocks.filter((b) => b.row === '후열');
|
||
const diffs = BEARING_ELEVATION_REF.map((r) => {
|
||
const modelTop = r.row === '전열' ? m.segments[r.no - 1].top : back[r.no - 6].bottom;
|
||
return modelTop - (r.elx - (r.h1 + r.h2) / 1000);
|
||
});
|
||
for (const d of diffs) expect(Math.abs(d)).toBeLessThan(0.002);
|
||
});
|
||
});
|
||
|
||
import { applyBearingRules, BEARING_RULES_DEFAULT } from '../src/core/bearing-ref';
|
||
|
||
describe('교량받침 공통 규칙 (2단계)', () => {
|
||
it('with the drawing values, the rules give back the drawing E, L, W, T1, T2 on every bearing', () => {
|
||
BEARING_ELEVATION_REF.forEach((r, i) => {
|
||
const v = applyBearingRules(r, BEARING_RULES_DEFAULT);
|
||
expect(v.E, `No ${r.no}`).toBe(r.E);
|
||
expect(v.L, `No ${r.no}`).toBe(SOLPLATE_REF[i].L);
|
||
expect(v.W, `No ${r.no}`).toBe(SOLPLATE_REF[i].W);
|
||
expect(v.T1, `No ${r.no}`).toBe(SOLPLATE_REF[i].T1);
|
||
expect(v.T2, `No ${r.no}`).toBe(SOLPLATE_REF[i].T2);
|
||
});
|
||
});
|
||
|
||
it('a 10 mm larger mortar h2 raises E by 10 and leaves L, W and T1, T2 unchanged', () => {
|
||
const r = BEARING_ELEVATION_REF[0];
|
||
const v = applyBearingRules(r, { ...BEARING_RULES_DEFAULT, h2: BEARING_RULES_DEFAULT.h2 + 10 });
|
||
expect(v.E).toBe(r.E + 10);
|
||
expect(v.L).toBe(r.A + 100);
|
||
expect(v.T1).toBe(SOLPLATE_REF[0].T1);
|
||
});
|
||
});
|