ahnyongjooandClaude Sonnet 5.5
964a841de1
- Code\rebar_pipeline, review_pipeline, pier-program을 정션에서 실제 폴더로 전환 - Code\rhino_mcp 및 CLAUDE_rhino배경.md 추가, .mcp.json은 PYTHONPATH로 새 위치 사용 - pier-program 내부 .git 제거(이력은 backup\pier-program_20261028.bundle에 보관) - worktree 가이드 반영(CLAUDE.local.md, HANDOFF.md) - D:\Rhino-MCP 경로 참조를 새 위치로 치환 Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
44 lines
2.6 KiB
Python
44 lines
2.6 KiB
Python
"""Okseong P1 column rebar reading (G2: P1~P5) -> 판독/g2_values.json.
|
|
|
|
Sheet 구조도(1) front view: column CL x 573551.6, z = drawing y - 309179.8 (footing top EL 14.375 at y 323554.8).
|
|
Sheet 구조도(2) sections: quarter arcs r 1,250 (column) / 1,148 (hoop), bar symbols on r 1,125 and 1,080.
|
|
Chains (front, left): '띠철근외측' 150 | 1.450 | 2@300 | 16@150 | 8@300 | 2@600 | 680 | 120 (= 9.000),
|
|
'크로스타이' 150 | 1.500 | 450 | 8@300 | 8@300 | 2@600 | 780 | 120 (= 9.000), from the footing bottom EL 12.175.
|
|
"""
|
|
import json
|
|
import math
|
|
from collections import Counter
|
|
from pathlib import Path
|
|
|
|
from dxftools import entities
|
|
|
|
CX, ZO = 573551.6, -309179.8
|
|
out = {}
|
|
hz = sorted({round(e.dxf.start.y + ZO, 1) for e in entities("D1", CX - 1300, 314000, CX + 1300, 334500, "CS-RBAR")
|
|
if e.dxftype() == "LINE" and abs(e.dxf.start.y - e.dxf.end.y) < 0.5 and abs(abs(e.dxf.start.x - e.dxf.end.x) - 2250) < 1})
|
|
out["hoops_drawn"] = {"count": len(hz), "levels": hz}
|
|
cx, cy = 624043.7, 335398.4
|
|
ins = [e for e in entities("D1", cx - 1300, cy - 1300, cx + 1300, cy + 1300, "CS-RBAR") if e.dxftype() == "INSERT"]
|
|
rr = Counter(round(math.hypot(e.dxf.insert.x - cx, e.dxf.insert.y - cy), 1) for e in ins)
|
|
out["section"] = {"rings": {str(r): n for r, n in rr.most_common(2)},
|
|
"first_deg": round(min(math.degrees(math.atan2(e.dxf.insert.y - cy, e.dxf.insert.x - cx)) % 360 for e in ins), 3),
|
|
"pitch_deg": 6.0, "tie_lines": 2295.0}
|
|
arcs = [(round(e.dxf.center.x - CX, 1), round(e.dxf.center.y + ZO, 1), e.dxf.radius) for e in
|
|
entities("D1", CX - 2200, 12100 - ZO, CX + 2200, 12750 - ZO, "CS-RBAR") if e.dxftype() == "ARC"]
|
|
out["main_hooks_drawn"] = {"arc_centres": sorted(set(arcs)), "leg_z": 12375.0, "outer": "outwards (centre r 1,395)",
|
|
"inner": "inwards (centre r 810)", "top_z": 20907.8, "straight_from_drawn": 12645.0}
|
|
B = 12175.0
|
|
hoops = [B + 150 + 1450 + 300 * k for k in range(3)]
|
|
hoops += [hoops[-1] + 150 * k for k in range(1, 17)]
|
|
hoops += [hoops[-1] + 300 * k for k in range(1, 9)]
|
|
hoops += [hoops[-1] + 600 * k for k in range(1, 3)]
|
|
ties = [B + 150 + 1500, B + 150 + 1500 + 450]
|
|
ties += [ties[-1] + 300 * k for k in range(1, 17)]
|
|
ties += [ties[-1] + 600 * k for k in range(1, 3)]
|
|
out["hoops_chain"] = hoops
|
|
out["ties_chain"] = ties
|
|
out["check"] = {"hoops_chain_equals_drawn": hoops == hz, "n_hoops": len(hoops), "n_tie_levels": len(ties)}
|
|
p = Path(__file__).resolve().parent / "판독" / "g2_values.json"
|
|
p.write_text(json.dumps(out, ensure_ascii=False, indent=1), encoding="utf-8")
|
|
print(json.dumps({k: out[k] for k in ("section", "check")}, ensure_ascii=False), out["ties_chain"][:3], out["ties_chain"][-2:])
|