ahnyongjooandClaude Sonnet 5.5
964a841de1
- Code\rebar_pipeline, review_pipeline, pier-program을 정션에서 실제 폴더로 전환 - Code\rhino_mcp 및 CLAUDE_rhino배경.md 추가, .mcp.json은 PYTHONPATH로 새 위치 사용 - pier-program 내부 .git 제거(이력은 backup\pier-program_20261028.bundle에 보관) - worktree 가이드 반영(CLAUDE.local.md, HANDOFF.md) - D:\Rhino-MCP 경로 참조를 새 위치로 치환 Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
24 lines
1.1 KiB
Python
24 lines
1.1 KiB
Python
"""Footing rebar layer rule of the Ungok frame (2026-10-20; was tools/infer_footing_rebar.py). The rules were read off the template pier (운곡교 P1) and
|
|
reproduced there: bars run (footing - 200) long; the dense layers (B2/B4, B6/B8) have the two end bars, one bar 200 (X-position axis) / 175 (Y) inside, then
|
|
a 125 grid; the sparse layers (B3, B7, B1, B5) the same with a 250 grid. The result equals the bar counts of the pier's own rebar schedule (P3, P4)."""
|
|
|
|
|
|
def dense(half, first_gap):
|
|
inner = half - first_gap
|
|
k = int((inner - 125) // 125)
|
|
g = [i * 125.0 for i in range(-k, k + 1)]
|
|
return sorted({-half, half, -inner, inner, *g})
|
|
|
|
|
|
def sparse(half, first_gap):
|
|
inner = half - first_gap
|
|
n = int(round(2 * inner / 250))
|
|
return sorted({-half, half, *[-inner + 250.0 * i for i in range(n + 1)]})
|
|
|
|
|
|
def infer(size_x, size_y):
|
|
lx, ly = size_x - 200, size_y - 200
|
|
hx, hy = lx / 2, ly / 2
|
|
return {"bottom_Y1": dense(hx, 200), "bottom_X2": dense(hy, 175), "bottom_Y3": sparse(hx, 200), "bottom_X4": sparse(hy, 175),
|
|
"top_Y": sparse(hx, 200), "top_X": sparse(hy, 175), "a_y": ly, "a_x": lx}
|