ypshimandClaude Opus 5.5
54c855ab1a
운곡교(완도,광주) 데이터에서 구조물 목록이 A1-광주, A1-완도, P1-완도 … P6-완도, P1-광주 … P6-광주, A2-광주, A2-완도 순서라 "바로 다음 구조물"만 보던 짝짓기가 A1-광주→P1-광주와 P6-완도→A2-완도를 놓쳤다. 이제 모든 다른 구조물의 받침 중 거더를 따라 진행 방향으로 처음 만나는 받침(방위각 ≤ 0.1°, 거더선 ≤ 0.1 m)을 짝으로 한다. 이 데이터에서 14개 연결 × 5 = 70쌍, WS01·WS04 없음, S −2.028 ~ −1.754 %. 교대만 있는 다경간 입력(A1·A2 353 m, 방위각 8° 차)은 짝 없음 → 교대 종단경사 사용 (정상). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
137 lines
8.1 KiB
TypeScript
137 lines
8.1 KiB
TypeScript
import { readFileSync } from 'node:fs';
|
||
import { fileURLToPath } from 'node:url';
|
||
import * as XLSX from 'xlsx';
|
||
import { describe, expect, it } from 'vitest';
|
||
import { parseAbutments } from '../src/core/abut/parse';
|
||
import { girderPairs, pairOf, type PairStructure, soleRowThickness } from '../src/core/bearing-pair';
|
||
import { loadP1 } from './helpers';
|
||
|
||
// RAG/받침방위각_솔플레이트검토.md §2 · §6 (Q-SH1·4·8·9). A1 from the RAG workbook's Abut sheet, P1 from the same input.
|
||
const RAG = fileURLToPath(new URL('../../../RAG/운곡교P1입력.xlsx', import.meta.url));
|
||
const a1 = parseAbutments(XLSX.read(readFileSync(RAG), { type: 'buffer' })).abutments[0];
|
||
const A1: PairStructure = { name: 'A1', bearings: a1.bearings.map((b) => ({ no: b.no, x: b.pos.e, y: b.pos.n, z: b.z, azimuthDeg: b.azimuthDeg! })) };
|
||
const p1 = loadP1();
|
||
const P1: PairStructure = { name: 'P1', bearings: p1.bearings.map((b) => ({ no: b.no, x: b.x, y: b.y, z: b.z, azimuthDeg: b.azimuthDeg })) };
|
||
|
||
describe('거더 짝 받침 · 종단경사 S (Q-SH1·4·5)', () => {
|
||
const pairs = girderPairs([A1, P1]);
|
||
|
||
it('pairs A1 ①–⑤ with P1 ①–⑤ on the girder line (offset 0.000 m, azimuth difference ≤ 0.1″)', () => {
|
||
expect(pairs.map((p) => [p.from.no, p.to.no])).toEqual([[1, 1], [2, 2], [3, 3], [4, 4], [5, 5]]);
|
||
for (const p of pairs) {
|
||
expect(p.offsetM).toBeLessThan(0.0005);
|
||
expect(p.fromCheckSec).toBeLessThanOrEqual(0.5);
|
||
expect(p.distanceM).toBeCloseTo(48.791, 3);
|
||
expect(p.warnings).toEqual([]);
|
||
}
|
||
});
|
||
|
||
it('S = −1.908 / −1.906 / −1.904 / −1.904 / −1.902 % (상세도 −1.910 … −1.901, ≤ 0.002 %), A1 is the 오르막 쪽', () => {
|
||
expect(pairs.map((p) => p.slopePct.toFixed(3))).toEqual(['-1.908', '-1.906', '-1.904', '-1.904', '-1.902']);
|
||
const drawing = [-1.910, -1.907, -1.905, -1.903, -1.901];
|
||
pairs.forEach((p, i) => expect(Math.abs(p.slopePct - drawing[i])).toBeLessThanOrEqual(0.0025));
|
||
expect(pairs.every((p) => p.uphill === 'A1')).toBe(true);
|
||
});
|
||
|
||
it('P1 back row ⑥–⑩ (next span, P2 not in the workbook) has no pair', () => {
|
||
for (const no of [6, 7, 8, 9, 10]) expect(pairOf(pairs, 'P1', no)).toBeUndefined();
|
||
expect(pairOf(pairs, 'P1', 3)!.from).toEqual({ structure: 'A1', no: 3 });
|
||
});
|
||
|
||
it('WS01: P1 ③ azimuth typed as 75°59′ (CAD) is kept but flagged', () => {
|
||
const typo: PairStructure = { ...P1, bearings: P1.bearings.map((b) => (b.no === 3 ? { ...b, azimuthDeg: 90 - (75 + 59 / 60) } : b)) };
|
||
const p = girderPairs([A1, typo]).find((q) => q.to.no === 3)!;
|
||
expect(p.warnings).toContain('WS01');
|
||
expect(p.toCheckSec).toBeGreaterThan(10);
|
||
expect(girderPairs([A1, typo]).filter((q) => q.to.no !== 3).every((q) => !q.warnings.includes('WS01'))).toBe(true);
|
||
});
|
||
|
||
it('WS04: two candidates within tolerance → the closest to the girder line is used', () => {
|
||
const b1 = P1.bearings[0];
|
||
const extra = { ...b1, no: 99, x: b1.x + 0.05 * Math.cos(b1.azimuthDeg * Math.PI / 180), y: b1.y - 0.05 * Math.sin(b1.azimuthDeg * Math.PI / 180) };
|
||
const p = girderPairs([A1, { ...P1, bearings: [...P1.bearings, extra] }]).find((q) => q.from.no === 1)!;
|
||
expect(p.warnings).toContain('WS04');
|
||
expect(p.to.no).toBe(1);
|
||
});
|
||
});
|
||
|
||
describe('솔플레이트 열 두께 (Q-SH3·8·9, L 800)', () => {
|
||
it('S 1.908 % → T 30, T1 38 / T2 22 (P1 상세도)', () => {
|
||
expect(soleRowThickness([{ lengthMm: 800, slopePct: -1.908 }])).toEqual({ T: 30, ends: [{ T1: 38, T2: 22 }] });
|
||
});
|
||
it('S 3 % → T 34, T1 46 / T2 22; S 0 → T 22', () => {
|
||
expect(soleRowThickness([{ lengthMm: 800, slopePct: 3 }])).toEqual({ T: 34, ends: [{ T1: 46, T2: 22 }] });
|
||
expect(soleRowThickness([{ lengthMm: 800, slopePct: 0 }]).T).toBe(22);
|
||
});
|
||
it('one T per row: the largest requirement wins, the flatter bearing gets a thicker T2', () => {
|
||
const row = soleRowThickness([{ lengthMm: 800, slopePct: 3 }, { lengthMm: 800, slopePct: 1 }]);
|
||
expect(row.T).toBe(34);
|
||
expect(row.ends[1]).toEqual({ T1: 38, T2: 30 });
|
||
});
|
||
});
|
||
|
||
describe('교량 전체 짝 받침 (bridgePairs, 구조물 순서 A1 · P1 … · A2)', () => {
|
||
it('builds the same A1 ↔ P1 pairs from the loaded records', async () => {
|
||
const { bridgePairs } = await import('../src/core/bridge-pairs');
|
||
const pairs = bridgePairs([p1], [a1]);
|
||
expect(pairs.map((p) => `${p.from.structure}${p.from.no}-${p.to.structure}${p.to.no}`)).toEqual(['A11-P11', 'A12-P12', 'A13-P13', 'A14-P14', 'A15-P15']);
|
||
});
|
||
});
|
||
|
||
describe('짝 받침 성립 범위 (검토 2026-11-06)', () => {
|
||
// A2 made from A1: each bearing moved 30 m along its girder and 0.6 m lower (S −2 %).
|
||
const a2 = { ...a1, name: 'A2', type: 'A2' as const, bearings: a1.bearings.map((b) => {
|
||
const t = (b.azimuthDeg! * Math.PI) / 180;
|
||
return { ...b, pos: { e: b.pos.e + 30 * Math.sin(t), n: b.pos.n + 30 * Math.cos(t) }, z: b.z - 0.6 };
|
||
}) };
|
||
|
||
it('A1 and A2 only (one span, no pier): A1 ①–⑤ pair with A2 ①–⑤, S −2 %', async () => {
|
||
const { bridgePairs } = await import('../src/core/bridge-pairs');
|
||
const pairs = bridgePairs([], [a1, a2]);
|
||
expect(pairs.map((p) => `${p.from.structure}${p.from.no}-${p.to.structure}${p.to.no}`)).toEqual(['A11-A21', 'A12-A22', 'A13-A23', 'A14-A24', 'A15-A25']);
|
||
expect(pairs.every((p) => Math.abs(p.slopePct + 2) < 1e-6 && p.warnings.length === 0)).toBe(true);
|
||
});
|
||
|
||
it('A1 and P1 only: the front row ①–⑤ is computed from A1, the back row ⑥–⑩ takes the assumed front value (가정, WS03)', async () => {
|
||
const { bridgePairs } = await import('../src/core/bridge-pairs');
|
||
const { buildPier } = await import('../src/core/geometry');
|
||
const m = buildPier(p1, { pairs: bridgePairs([p1], [a1]) });
|
||
const front = m.soles.filter((s) => s.row === '전열'), back = m.soles.filter((s) => s.row === '후열');
|
||
expect(front.every((s) => s.slopeSource === '계산' && s.pair?.structure === 'A1')).toBe(true);
|
||
expect(back.every((s, i) => s.slopeSource === '가정' && !s.pair && s.slopePct === front[i].slopePct && s.warnings.includes('WS03'))).toBe(true);
|
||
});
|
||
|
||
it('straight bridge: a back row on the same girder lines is not taken for the A1 partner (the nearest along the girder is)', () => {
|
||
const straight: PairStructure = { name: 'P1', bearings: P1.bearings.map((b) => {
|
||
if (b.no <= 5) return b;
|
||
const f = P1.bearings.find((q) => q.no === b.no - 5)!;
|
||
const t = (f.azimuthDeg * Math.PI) / 180;
|
||
return { ...b, azimuthDeg: f.azimuthDeg, x: f.x + 1.2 * Math.sin(t), y: f.y + 1.2 * Math.cos(t) };
|
||
}) };
|
||
const pairs = girderPairs([A1, straight]);
|
||
expect(pairs.map((p) => p.to.no)).toEqual([1, 2, 3, 4, 5]);
|
||
expect(pairs.every((p) => p.warnings.length === 0)).toBe(true);
|
||
});
|
||
});
|
||
|
||
describe('교대만 있는 프로젝트 (가져오기 허용 2026-11-06)', () => {
|
||
it('a project file with no pier and A1 only round-trips', async () => {
|
||
const { parseProject, serializeProject, SCHEMA_VERSION } = await import('../src/core/project');
|
||
const file = { schemaVersion: SCHEMA_VERSION, project: { name: '교대만', bridge: '', client: '', author: '', crs: '', memo: '' },
|
||
source: { fileName: '운곡교P1입력.xlsx', sheets: [] }, history: [], piers: [], abutments: [a1] };
|
||
const back = parseProject(serializeProject(file as Parameters<typeof serializeProject>[0]));
|
||
expect(back.piers).toEqual([]);
|
||
expect(back.abutments?.map((a) => a.name)).toEqual(['A1']);
|
||
});
|
||
});
|
||
|
||
describe('두 노선 (광주 · 완도) — 목록 순서와 무관하게 거더 기하로 짝 (2026-11-06)', () => {
|
||
it('A1-광주, A1-완도, P1-완도, P1-광주 in that order still pair 광주 with 광주 and 완도 with 완도', () => {
|
||
const shift = (s: PairStructure, name: string, de: number): PairStructure => ({ name, bearings: s.bearings.map((b) => ({ ...b, x: b.x + de })) });
|
||
const list = [shift(A1, 'A1-광주', 13), shift(A1, 'A1-완도', 0), shift(P1, 'P1-완도', 0), shift(P1, 'P1-광주', 13)];
|
||
const pairs = girderPairs(list);
|
||
expect(pairs).toHaveLength(10);
|
||
expect(pairs.every((p) => p.from.structure.slice(3) === p.to.structure.slice(3) && p.from.structure.startsWith('A1') && p.from.no === p.to.no)).toBe(true);
|
||
});
|
||
});
|