"""G4 gate checker: coping rebar C1-C16, S1, S2 (check C10) inside Rhino 8. Globals: __rhino_doc__, EXPECTED_PATH, RESULT_PATH. Expected values from EXPECTED_PATH section G4 (D3 counts, L, a/b ranges; D1/D2 dimension chains). Width decisions (K1) make the original-length checks of the range marks fail by design; they are reported as FAIL and listed in `planned_fail`. Generator params are not read. Ported from Code/교각모델링/verify_coping_rebar.py (same checks and order). """ import json import os import sys import Rhino.Geometry as rg from Rhino.DocObjects import ObjectColorSource sys.path.insert(0, os.path.dirname(__file__)) from _common import all_objects, load_expected, series, write_result, ychain # noqa: E402 doc = __rhino_doc__ X = load_expected(EXPECTED_PATH) PID, G = X["pier_id"], X["G4"] COUNT, L, DIA = G["count"], G["L"], G["dia"] RANGE = {m: tuple(v) for m, v in G["range"].items()} Y24 = ychain(G["y24_chain"], G["half_width"]) Y13 = ychain(G["y13_chain"], G["half_width"]) TIER = G["tier_z"] STIR_X = {m: sorted(series(v)) for m, v in G["stirrup_x"].items()} LOOP_Z = {m: series(v) for m, v in G["loop_z"].items()} PALETTE = {int(k): tuple(v) for k, v in X["rebar_palette"].items()} results = [] def check(item, exp, act, tol=1.0): results.append(dict(check="C10", item=item, expected=round(exp, 3), actual=round(act, 3), diff=round(act - exp, 3), tol=tol, result="PASS" if abs(act - exp) <= tol else "FAIL")) def flag(item, ok, detail=""): results.append(dict(check="C10", item=item, detail=detail, result="PASS" if ok else "FAIL")) def info(item, detail): results.append(dict(check="C10", item=item, detail=detail, result="INFO")) def main(): objs = all_objects(doc) cl = {m: [o for o in objs if (o.Attributes.GetUserString("id") or "").startswith(f"{PID}-RC-") and o.Attributes.GetUserString("mark") == m] for m in COUNT} pp = {m: [o for o in objs if (o.Attributes.GetUserString("id") or "").startswith(f"{PID}-R-") and o.Attributes.GetUserString("mark") == m] for m in COUNT} for m in COUNT: check(f"{m} bar count", COUNT[m], len(cl[m]), tol=0) flag(f"{m} pipes closed & paired", len(pp[m]) == len(cl[m]) and all(o.Geometry.IsSolid for o in pp[m])) if not cl[m]: continue lens = [float(o.Attributes.GetUserString("design_length")) for o in cl[m]] if m in RANGE: key, hi, lo = RANGE[m] vals = [float(o.Attributes.GetUserString(key)) for o in cl[m]] check(f"{m} {key} max vs schedule", hi, max(vals)) check(f"{m} {key} min vs schedule", lo, min(vals)) cv = G["range_convention"][key] fixed = cv["a"] if key == "b_sched" else cv["b"] avg_conv = 2 * fixed + (hi + lo) + cv["c_times"] * cv["c"] # schedule convention: (max+min)/2 check(f"{m} schedule L reproduced by convention (max+min)/2", L[m], avg_conv) ws = sorted({o.Attributes.GetUserString("w_model") for o in cl[m]}) results.append(dict(check="C10", item=f"{m} original length vs L (drawn widths {ws}, K1 decision)", detail=f"model mean {sum(lens) / len(lens):.1f} vs L {L[m]}", result="FAIL")) else: check(f"{m} original length vs L (worst)", 0, max(abs(v - L[m]) for v in lens)) dev = [o.Geometry.GetLength() - float(o.Attributes.GetUserString("design_length")) for o in cl[m]] info(f"{m} curve - original length", f"{min(dev):.1f} / {max(dev):.1f}") for m, z in TIER.items(): zs = [o.Geometry.PointAt(o.Geometry.Domain.Mid).Z for o in cl[m]] check(f"{m} tier EL (worst)", 0, max(abs(v - z) for v in zs)) for pair in G["pairs"]: ys = sorted((round(o.Geometry.PointAt(o.Geometry.Domain.Mid).Y), m) for m in pair for o in cl[m]) flag(f"{'/'.join(pair)} Y = A-A chain, alternate from {pair[0]} at {Y24[0]:.0f}", [y for y, _ in ys] == Y24 and [m for _, m in ys] == [pair[i % 2] for i in range(len(Y24))]) for m, xs in STIR_X.items(): got = sorted({round(o.Geometry.GetBoundingBox(True).Center.X) for o in cl[m]}) flag(f"{m} stirrup X positions", got == xs, f"{len(got)} positions") per = {} for o in cl[m]: k = round(o.Geometry.GetBoundingBox(True).Center.X) per[k] = per.get(k, 0) + 1 flag(f"{m} {G['stirrups_per_x']} stirrups per position", set(per.values()) == {G["stirrups_per_x"]}) zb = [round(o.Geometry.GetBoundingBox(True).Min.Z) for o in cl["C10"]] check(f"C10 stirrup bottom EL {G['c10_bottom'] / 1000:.3f} (worst)", 0, max(abs(v - G["c10_bottom"]) for v in zb)) for m, zs in LOOP_Z.items(): got = sorted({round(o.Geometry.GetBoundingBox(True).Center.Z) for o in cl[m]}) flag(f"{m} loop levels", got == zs, str(got)) for m in ("C15", "C16"): got = sorted(round(o.Geometry.GetBoundingBox(True).Center.Y) for o in cl[m]) flag(f"{m} Y = B-B chain", got == Y13, f"{len(got)}") check(f"C15 EL {G['c15_top'] / 1000:.3f}", G["c15_top"], max(o.Geometry.GetBoundingBox(True).Max.Z for o in cl["C15"])) check(f"C16 EL {G['c16_top'] / 1000:.3f}", G["c16_top"], max(o.Geometry.GetBoundingBox(True).Max.Z for o in cl["C16"])) # horizontal-segment height (bbox max picks up upward hooks) c14z = sorted(round(o.Geometry.PointAt(o.Geometry.Domain.Mid).Z, 1) for o in cl["C14"]) exp14 = sorted(z for z, n in G["c14_levels"] for _ in range(n)) flag("C14 levels/count per level", c14z == exp14, "") step = {int(k): v for k, v in G["step_top"].items()} for m, (n_per, dz) in G["s_per_girder"].items(): by = {} for o in cl[m]: g = int(o.Attributes.GetUserString("occurrence")[1]) by.setdefault(g, []).append(o.Geometry.GetBoundingBox(True).Max.Z) flag(f"{m} per girder line = {n_per}", sorted(len(v) for v in by.values()) == [n_per] * len(step)) check(f"{m} EL = step top - {dz} (worst)", 0, max(abs(z - (step[g] - dz)) for g, v in by.items() for z in v)) cp = [o for o in objs if o.Attributes.GetUserString("id") == f"{PID}-CP"][0].Geometry cover = {} for m in COUNT: bad, cov = 0, 1e9 r = DIA[m] / 2 for o in cl[m]: c = o.Geometry for t in c.DivideByCount(max(4, int(c.GetLength() / 200)), True): p = c.PointAt(t) for q in (p, p + rg.Vector3d(r, 0, 0), p - rg.Vector3d(r, 0, 0), p + rg.Vector3d(0, r, 0), p - rg.Vector3d(0, r, 0), p + rg.Vector3d(0, 0, r), p - rg.Vector3d(0, 0, r)): if not cp.IsPointInside(q, 0.01, False): bad += 1 cov = min(cov, p.DistanceTo(cp.ClosestPoint(p)) - r) cover[m] = round(cov, 1) check(f"{m} sample points outside coping", 0, bad, tol=0) info("min cover to coping surface per mark (top face under pedestals counted)", json.dumps(cover)) wrong = 0 for o in objs: if (o.Attributes.GetUserString("id") or "").startswith(f"{PID}-R-"): d = int(o.Attributes.GetUserString("dia")[1:]) c = o.Attributes.ObjectColor if o.Attributes.ColorSource != ObjectColorSource.ColorFromObject or (c.R, c.G, c.B) != PALETTE[d]: wrong += 1 check("rebar colour mismatches (all rebar)", 0, wrong, tol=0) write_result(RESULT_PATH, results, dict(cover=cover)) main()