{ "_meta": { "structure": "운곡교 P1 교각 (완도방향)", "status": "CONFIRMED - design rules approved by user 2026-10-07 (설계서 v0.1.01)", "units": "mm; Z = absolute elevation EL x 1000", "frame": "X = transverse (front view left->right, along coping), Y = longitudinal (side view left->right, bridge axis), Z = up; origin X=Y=0 at pier centerline", "sources": { "D1": "RAG/C0050205-025-운곡교 교각도(1)(완도방향 P1).dwg", "D2": "RAG/C0050205-026-운곡교 교각도(2)(완도방향 P1).dwg", "D3": "RAG/C0050205-027-운곡교 교각도(3)(완도방향 P1).dwg" }, "drawing_datums": { "D1_front_center_x": 12159.4, "D1_side_center_x": 30133.6, "D1_plan_center_xy": [ 12162.4, 26412.3 ], "D2_footplan_center_xy": [ 29072.6, 16871.3 ] } }, "lean_concrete": { "size_x": 9550, "size_y": 8000, "z_bottom": 26108, "z_top": 26208, "src": { "size_x": "D1 정면도 1CC24 (7384.4~16934.4), footing +100 each side", "size_y": "D1 단면도 1CE40/1CE41 (100 offset from footing edge)", "thickness": "D1 정면도 1CC23/1CC25 (8015.6~8115.6 = 100)", "z_top": "= footing bottom EL. 26.208 (D1 정면도 text 'EL. 26.208')" } }, "footing": { "size_x": 9350, "size_y": 7800, "z_bottom": 26208, "thickness": 2200, "src": { "size_x": "D1 정면도 dim '9.350'; D2 기초평면도 1DEFC (24397.6~33747.6)", "size_y": "D1 단면도 dim '7.800'; D2 기초평면도 1DEFD (12971.3~20771.3)", "z_bottom": "D1 정면도 'EL. 26.208'", "thickness": "D1 정면도·단면도 dim '2.200'; 1CAFD (8115.6~10315.6)", "column_offset": "D1 정면도 '3.675'+'1.000' = 4.675 = 9.350/2; 단면도 '2.900'+'1.000' = 3.900 = 7.800/2 -> concentric" } }, "column": { "shape": "circular", "diameter": 2000, "height": 12003, "src": { "diameter": "D1 단면 C-C/D-D/E-E dim '2.000'; D2 기초평면도 ARC 1E0DC r=1000; D1 정면도 1C4D0/1C4D1 (11159.4~13159.4)", "height": "D1 정면도·단면도 dim '12.003' (column drawn with break lines; drawn length is NOT used)" } }, "coping": { "length_bottom_tip_to_tip": 12400, "width_y": 3100, "z_bottom_flat": 40411, "flat_bottom_half_width": 1100, "soffit_radius": 12000, "tip_bottom_rise": 1500, "end_batter_top_inset": 200, "top_steps": [ { "x0": -6000, "x1": -3801, "z": 43411 }, { "x0": -3801, "x1": -1296, "z": 43483 }, { "x0": -1296, "x1": 1210, "z": 43555 }, { "x0": 1210, "x1": 3715, "z": 43627 }, { "x0": 3715, "x1": 6000, "z": 43698 } ], "src": { "length": "D1 정면도·평면도 dim '12.400'; 1C381/1C382 bottom tips 5959.4 / 18359.4", "width_y": "D1 단면도 dim '3.100', 1C2FB (28583.6~31683.6); 평면도 1BFBB", "z_bottom_flat": "= column top = 26.208 + 2.200 + 12.003 = 40.411; cross-check D1 'EL. 43.411' - 1.500 - 1.500 = 40.411", "flat_bottom_half_width": "D1 정면도 1C4BD (11059.4~13259.4 = 2200); dims '5.100'+'100'+'1.000' = 6.200", "soffit_radius": "D1 정면도 text 'R=12.000'; ARC 1C4BF/1C4C0 r=12000", "tip_bottom_rise": "D1 정면도 dim '1.500' (second from top)", "end_batter": "D1 정면도 dim '200' at both top ends; 1C381 (6159.4,19515.6)-(5959.4,18015.6)", "top_steps_x": "D1 평면도 dims '200','2.199','3@2.505=7.516','2.284','200'; 정면도 1C4B1~1C4B9", "top_steps_z": "ends: D1 'EL. 43.411', 'EL. 43.698'; center: 단면도 'EL. 43.555'; intermediate steps 43.483 / 43.627 from drawn step rise 71.8~71.9 [CAD vertex, no dimension text]" } }, "piles": { "diameter": 600, "count_x": 6, "count_y": 5, "pitch": 1550, "edge": 800, "length": 24400, "head_embedment": 100, "src": { "diameter": "D1 정면도 '(Φ600.0X9T,' outer diameter", "layout_x": "D1 정면도 dims '800','5@1.550=7.750','800'", "layout_y": "D1 단면도 dims '800','4@1.550=6.200','800'", "length": "D1 정면도 'L=24.4M)'", "head_embedment": "D1 정면도 CS-CNTL pile axis top y=8215.6 = footing bottom 8115.6 + 100 [CAD vertex]" } }, "hitl_decisions_2026_10_07": { "bearing_pedestals": "excluded (EL.'X' vs coping top 211mm conflict -> OPEN list)", "coping_soffit": "cylindrical band: front-view R12000 arcs extruded along Y (plan circle r=1100 meaning unresolved)", "piles": "included as solid D600 cylinders" }, "bearing_seats": { "_note": "pedestal (h1) per girder line, split into front/rear halves; pad (h2) = frustum bottom (A+200)x(B+200) -> top (A+100)x(B+100), height h2, rotated per row", "plan_datum": [ 12162.4, 26412.3 ], "pitch_x": 2505.3333333333335, "pedestal_girder5": { "front_half": [ [ 4324.0, -1250.0 ], [ 4420.0, -3.7 ], [ 5616.5, -95.8 ], [ 5520.4, -1342.1 ] ], "rear_half": [ [ 4420.0, -3.7 ], [ 4516.0, 1242.6 ], [ 5712.5, 1150.5 ], [ 5616.5, -95.8 ] ], "rotation_deg": 4.405, "src": "D1 평면도 1C0CE~1C0D1 (outline 2500x1200), 1CAD4 (front/rear split)" }, "pad_rows": { "front": { "centre_rel_girder5": [ 4968.3, -697.8 ], "rotation_deg": 4.403, "drawn_bottom_along": 900.1, "drawn_bottom_across": 840.0, "drawn_top_along": 800.1, "drawn_top_across": 740.0, "src": "D1 평면도 1C124 (bottom), 1C125 (top)" }, "rear": { "centre_rel_girder5": [ 5053.4, 599.8 ], "rotation_deg": 3.102, "drawn_bottom_along": 899.9, "drawn_bottom_across": 839.9, "drawn_top_along": 800.0, "drawn_top_across": 740.0, "src": "D1 평면도 1C11B (bottom), 1C11C (top)" } }, "bearings": [ { "no": 1, "type": "3500 kN 양방향", "girder_line": 1, "row": "front", "centre": [ -5053.0, -697.8 ], "rotation_deg": 4.403, "el_x": 43625, "h1": 164, "h2": 50, "A": 700, "B": 640, "inferred": true }, { "no": 2, "type": "3500 kN 양방향", "girder_line": 2, "row": "front", "centre": [ -2547.7, -697.8 ], "rotation_deg": 4.403, "el_x": 43697, "h1": 164, "h2": 50, "A": 700, "B": 640, "inferred": true }, { "no": 3, "type": "3500 kN 교축방향", "girder_line": 3, "row": "front", "centre": [ -42.4, -697.8 ], "rotation_deg": 4.403, "el_x": 43768, "h1": 164, "h2": 50, "A": 700, "B": 790, "inferred": false }, { "no": 4, "type": "3500 kN 양방향", "girder_line": 4, "row": "front", "centre": [ 2463.0, -697.8 ], "rotation_deg": 4.403, "el_x": 43840, "h1": 164, "h2": 50, "A": 700, "B": 640, "inferred": false }, { "no": 5, "type": "3500 kN 양방향", "girder_line": 5, "row": "front", "centre": [ 4968.3, -697.8 ], "rotation_deg": 4.403, "el_x": 43912, "h1": 164, "h2": 50, "A": 700, "B": 640, "inferred": false }, { "no": 6, "type": "2800 kN 양방향", "girder_line": 1, "row": "rear", "centre": [ -4967.9, 599.8 ], "rotation_deg": 3.102, "el_x": 43600, "h1": 139, "h2": 50, "A": 700, "B": 540, "inferred": true }, { "no": 7, "type": "2800 kN 양방향", "girder_line": 2, "row": "rear", "centre": [ -2462.6, 599.8 ], "rotation_deg": 3.102, "el_x": 43672, "h1": 139, "h2": 50, "A": 700, "B": 540, "inferred": true }, { "no": 8, "type": "2800 kN 교축방향", "girder_line": 3, "row": "rear", "centre": [ 42.7, 599.8 ], "rotation_deg": 3.102, "el_x": 43744, "h1": 139, "h2": 50, "A": 700, "B": 650, "inferred": false }, { "no": 9, "type": "2800 kN 양방향", "girder_line": 4, "row": "rear", "centre": [ 2548.1, 599.8 ], "rotation_deg": 3.102, "el_x": 43816, "h1": 139, "h2": 50, "A": 700, "B": 540, "inferred": false }, { "no": 10, "type": "2800 kN 양방향", "girder_line": 5, "row": "rear", "centre": [ 5053.4, 599.8 ], "rotation_deg": 3.102, "el_x": 43887, "h1": 139, "h2": 50, "A": 700, "B": 540, "inferred": false } ], "translation_checks": [ { "item": "girder4 pedestal vertex", "dx": -0.17, "dy": 0.1 }, { "item": "girder4 pedestal vertex", "dx": 0.03, "dy": 0.1 }, { "item": "girder4 pedestal vertex", "dx": 0.03, "dy": -0.1 }, { "item": "girder4 pedestal vertex", "dx": -0.07, "dy": -0.1 }, { "item": "girder3 pedestal vertex", "dx": 0.07, "dy": -0.2 }, { "item": "girder3 pedestal vertex", "dx": -0.23, "dy": -0.2 }, { "item": "girder4 front pad centre", "dx": -0.12, "dy": -0.02 }, { "item": "girder4 rear pad centre", "dx": 0.01, "dy": -0.03 } ], "src": { "h1_h2_A_B_ELX": "D2 교량받침 ELEVATION TABLE", "row_mapping": "front(전열)=3500kN NO.1-5 (S1 852), rear(후열)=2800kN NO.6-10 (S1 950); 852+1298+950=3100", "girder_mapping": "NO.k / NO.k+5 -> girder line k, left->right (EL.'X' rises with coping steps)", "pad_size_rule": "D1 평면도 front pad 900x840 / 800x740 = (A+200)x(B+200) / (A+100)x(B+100) for A=700,B=640; side view 900->800 over 50" } }, "column_rebar": { "_note": "Column rebar P1-P6. Z = EL x 1000. Angles from +X counter-clockwise (plan).", "schedule": { "P1": { "L": "17.247", "R": "340", "C": "500", "B": "534", "A": "16.213", "n": "46", "dia": "S32", "shape": "XIV", "mark": "P1" }, "P2": { "L": "16.553", "A": "16.553", "n": "46", "dia": "\"", "shape": "XVI", "mark": "P2" }, "P3": { "L": "6.436", "mark": "P3", "shape": "VI", "dia": "\"", "A": "2.818", "B": "200", "R": "897", "n": "36" }, "P4": { "L": "5.636", "mark": "P4", "shape": "V", "dia": "\"", "n": "9", "A": "2.753", "B": "65", "R": "897" }, "P5": { "L": "5.636", "mark": "P5", "shape": "IX", "dia": "\"", "n": "22", "A": "5.571", "B": "65", "R": "897" }, "P6": { "L": "2.136", "mark": "P6", "shape": "III", "dia": "\"", "n": "36", "A": "1.836", "B": "150" } }, "main_bars": { "divisions": 46, "start_deg": 0.001, "pitch_deg": 7.826086956521739, "section_cad": { "count_outer": 46, "count_inner": 46, "start_deg": 0.001, "pitch_deg_mean": 7.8261, "r_outer_cad": 870.5, "r_inner_cad": 825.5 }, "r_outer_dim": 875, "r_outer": 870.5, "r_inner": 825.5, "p1": { "role": "outer, hooked into footing (XIV)", "hook_leg_z": 26508, "bend_r": 340, "hook_leg": 500, "hook_dir": "outward (radial +)", "straight_from": 26848, "straight_len": 16213 }, "p2": { "role": "inner, straight (XVI)", "z0": 26508, "length": 16553 }, "src": { "radii": "D1 단면 C-C dim '125'/'875' (outer); D1 정면도 lines 1C4DB x=875, 1C4DA x=830 (inner); section CAD dots 870.5/825.5", "bottom": "D1 정면도 1C4D7 bottom y -> EL 26.508 (= footing bottom + 300); 1C4DB starts 26.848 (= 26.508 + R340); P1 bend b=534 = pi/2 x 340", "top": "schedule: P1 26.848+16.213 = 43.061, P2 26.508+16.553 = 43.061 (drawn lines stop at 43.011 / 40.411 -> schedule adopted; HITL H1 2026-10-07)" } }, "hoops": { "radius": 897, "levels": [ 27388, 27508, 27628, 27748, 27868, 27988, 28108, 28228, 28348, 28468, 28588, 28708, 28828, 28948, 29068, 29188, 29308, 29428, 29548, 29668, 29788, 29908, 30028, 30148, 30268, 30388, 30508, 30628, 30748, 30868, 30988, 31288, 31588, 31888, 32188, 32488, 32788, 33088, 33388, 33688, 33988, 34288, 34588, 34888, 35188, 35488, 35788, 36088, 36388, 36688, 36988, 37288, 37588, 37888, 38188, 38488, 38788, 39088, 39388, 39688, 39988, 40288, 40588, 40888, 41188, 41488, 41788 ], "marks": [ "P4", "P4", "P4", "P4", "P4", "P4", "P4", "P4", "P4", "P5", "P5", "P5", "P5", "P5", "P5", "P5", "P5", "P5", "P5", "P5", "P5", "P5", "P5", "P5", "P5", "P5", "P5", "P5", "P5", "P5", "P5", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3", "P3" ], "src": { "levels": "D1 정면도 dim chain '150','1.030','8@120=960','22@120=2.640','36@300=10.800' (user: @120 adopted over label @100); drawn hoop dots y match", "radius": "D3 R 897 (2*pi*897 = 5636 = L of P4/P5); section ARC r=898; front dots 902 (HITL H2: R897)" } }, "ties": { "levels": [ 27388, 29188, 30988, 32788, 34588, 36388, 38188, 39988, 41788 ], "angles_deg": [ 0, 45, 90, 135 ], "straight": 1836, "hook": 150, "src": { "levels": "D1 정면도 dim chain '150','1.030','8@1.800=14.400'", "angles": "D1 단면 C-C tie lines along 0/45/90/135 deg, ends at +-897/898" } } }, "footing_rebar": { "_note": "Footing rebar B1-B12; z above footing bottom EL 26.208; X/Y as model axes", "schedule": { "B1": [ "B1", "III", "S25", "38", "7.600", "200", "8.000", "304.000" ], "B2": [ "B2", "XII", "\"", "38", "7.600", "1.950", "11.500", "437.000" ], "B3": [ "B3", "III", "S19", "38", "7.600", "200", "8.000", "304.000" ], "B4": [ "B4", "I", "\"", "35", "7.600", "7.600", "266.000" ], "B5": [ "B5", "XII", "S29", "32", "9.150", "200", "9.550", "305.600" ], "B6": [ "B6", "XII", "\"", "32", "9.150", "1.950", "13.050", "417.600" ], "B7": [ "B7", "XII", "\"", "32", "9.150", "200", "9.550", "305.600" ], "B8": [ "B8", "XVI", "\"", "29", "9.150", "9.150", "265.350" ], "B9": [ "B9", "XI", "H16", "1.995", "96", "64", "2.155", "1062.415" ], "B10": [ "B10", "XIII", "\"", "9", "9.198", "7.644", "33.684", "303.156" ], "B11": [ "B11", "XII", "S16", "28", "9.150", "100", "9.350", "261.800" ], "B12": [ "B12", "III", "\"", "34", "7.600", "100", "7.800", "265.200" ] }, "layers": { "bottom_Y1": { "marks": "B2/B4 alternate", "z": 122.0, "pos": [ -4575.0, -4375.0, -4250.0, -4125.0, -4000.0, -3875.0, -3750.0, -3625.0, -3500.0, -3375.0, -3250.0, -3125.0, -3000.0, -2875.0, -2750.0, -2625.0, -2500.0, -2375.0, -2250.0, -2125.0, -2000.0, -1875.0, -1750.0, -1625.0, -1500.0, -1375.0, -1250.0, -1125.0, -1000.0, -875.0, -750.0, -625.0, -500.0, -375.0, -250.0, -125.0, -0.0, 125.0, 250.0, 375.0, 500.0, 625.0, 750.0, 875.0, 1000.0, 1125.0, 1250.0, 1375.0, 1500.0, 1625.0, 1750.0, 1875.0, 2000.0, 2125.0, 2250.0, 2375.0, 2500.0, 2625.0, 2750.0, 2875.0, 3000.0, 3125.0, 3250.0, 3375.0, 3500.0, 3625.0, 3750.0, 3875.0, 4000.0, 4125.0, 4250.0, 4375.0, 4575.0 ], "axis": "Y" }, "bottom_X2": { "marks": "B6/B8 alternate", "z": 178.0, "pos": [ -3800.0, -3625.0, -3500.0, -3375.0, -3250.0, -3125.0, -3000.0, -2875.0, -2750.0, -2625.0, -2500.0, -2375.0, -2250.0, -2125.0, -2000.0, -1875.0, -1750.0, -1625.0, -1500.0, -1375.0, -1250.0, -1125.0, -1000.0, -875.0, -750.0, -625.0, -500.0, -375.0, -250.0, -125.0, -0.0, 125.0, 250.0, 375.0, 500.0, 625.0, 750.0, 875.0, 1000.0, 1125.0, 1250.0, 1375.0, 1500.0, 1625.0, 1750.0, 1875.0, 2000.0, 2125.0, 2250.0, 2375.0, 2500.0, 2625.0, 2750.0, 2875.0, 3000.0, 3125.0, 3250.0, 3375.0, 3500.0, 3625.0, 3800.0 ], "axis": "X" }, "bottom_Y3": { "marks": "B3", "z": 227.5, "pos": [ -4575.0, -4375.0, -4125.0, -3875.0, -3625.0, -3375.0, -3125.0, -2875.0, -2625.0, -2375.0, -2125.0, -1875.0, -1625.0, -1375.0, -1125.0, -875.0, -625.0, -375.0, -125.0, 125.0, 375.0, 625.0, 875.0, 1125.0, 1375.0, 1625.0, 1875.0, 2125.0, 2375.0, 2625.0, 2875.0, 3125.0, 3375.0, 3625.0, 3875.0, 4125.0, 4375.0, 4575.0 ], "axis": "Y" }, "bottom_X4": { "marks": "B7", "z": 277.0, "pos": [ -3800.0, -3625.0, -3375.0, -3125.0, -2875.0, -2625.0, -2375.0, -2125.0, -1875.0, -1625.0, -1375.0, -1125.0, -875.0, -625.0, -375.0, -125.0, 125.0, 375.0, 625.0, 875.0, 1125.0, 1375.0, 1625.0, 1875.0, 2125.0, 2375.0, 2625.0, 2875.0, 3125.0, 3375.0, 3625.0, 3800.0 ], "axis": "X" }, "top_Y": { "marks": "B1", "z": 2073.0, "pos": [ -4575.0, -4375.0, -4125.0, -3875.0, -3625.0, -3375.0, -3125.0, -2875.0, -2625.0, -2375.0, -2125.0, -1875.0, -1625.0, -1375.0, -1125.0, -875.0, -625.0, -375.0, -125.0, 125.0, 375.0, 625.0, 875.0, 1125.0, 1375.0, 1625.0, 1875.0, 2125.0, 2375.0, 2625.0, 2875.0, 3125.0, 3375.0, 3625.0, 3875.0, 4125.0, 4375.0, 4575.0 ], "axis": "Y" }, "top_X": { "marks": "B5", "z": 2127.0, "pos": [ -3800.0, -3625.0, -3375.0, -3125.0, -2875.0, -2625.0, -2375.0, -2125.0, -1875.0, -1625.0, -1375.0, -1125.0, -875.0, -625.0, -375.0, -125.0, 125.0, 375.0, 625.0, 875.0, 1125.0, 1375.0, 1625.0, 1875.0, 2125.0, 2375.0, 2625.0, 2875.0, 3125.0, 3375.0, 3625.0, 3800.0 ], "axis": "X" }, "mid_X": { "marks": "B11", "axis": "X", "levels": { "550.0": [ -2750.0, -1750.0, -750.0, 750.0, 1750.0, 2750.0 ], "950.0": [ -3250.0, -2250.0, -1250.0, -250.0, 250.0, 1250.0, 2250.0, 3250.0 ], "1350.0": [ -2750.0, -1750.0, -750.0, 750.0, 1750.0, 2750.0 ], "1750.0": [ -3250.0, -2250.0, -1250.0, -250.0, 250.0, 1250.0, 2250.0, 3250.0 ] } }, "mid_Y": { "marks": "B12", "axis": "Y", "levels": { "550.0": [ -3875.0, -2875.0, -1875.0, 1875.0, 2875.0, 3875.0 ], "950.0": [ -3375.0, -2375.0, -1375.0, -375.0, 375.0, 1375.0, 2375.0, 3375.0 ], "1350.0": [ -3875.0, -2875.0, -1875.0, 1875.0, 2875.0, 3875.0 ], "1750.0": [ -3375.0, -2375.0, -1375.0, -375.0, 375.0, 1375.0, 2375.0, 3375.0 ] } } }, "b9": { "grid_x": [ -4125, -3875, -3625, -3375, -3125, -2875, -2625, -2375, -2125, -1875, -1625, -1375, -1125, -875, -625, -375, -125, 125, 375, 625, 875, 1125, 1375, 1625, 1875, 2125, 2375, 2625, 2875, 3125, 3375, 3625, 3875, 4125 ], "grid_y": [ -3500, -3250, -3000, -2750, -2500, -2250, -2000, -1750, -1500, -1250, -1000, -750, -500, -250, 0, 250, 500, 750, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000, 3250, 3500 ], "checker_parity": 0, "count": 493, "z0": 127.5, "a": 1995, "b": 96, "c": 64, "src": "D1 EREC vertical lines z 150~2100 @250 both views; count = 1062.415/2.155 = 493 [역산]; checkerboard parity [추론, hitl]" }, "b10": { "levels": [ 350, 550, 750, 950, 1150, 1350, 1550, 1750, 1950 ], "size_x": 9198, "size_y": 7644, "src": "D1 정면도 우측 '150','9@200=1.800'; dots x=4593/y=3818; D3 B10 a 9.198 b 7.644" }, "legs": { "B2": { "leg": 1950, "dir": "up", "at": "Y ends" }, "B6": { "leg": 1950, "dir": "up", "at": "X ends" }, "B5": { "leg": 200, "dir": "down" }, "B7": { "leg": 200, "dir": "up" }, "B1": { "hook": 200, "dir": "down" }, "B3": { "hook": 200, "dir": "up" }, "B11": { "leg": 100, "dir": "down [hitl]" }, "B12": { "hook": 100, "dir": "down [hitl]" } }, "counts_check": { "bottom_Y1": 73, "bottom_X2": 61, "bottom_Y3": 38, "bottom_X4": 32, "top_Y": 38, "top_X": 32, "mid_X": 28, "mid_Y": 28 } }, "coping_rebar": { "_note": "1st batch C1-C11; C12-C16, S1, S2 pending (OPEN)", "y_positions": [ -1450, -1313, -1188, -1063, -938, -813, -688, -563, -438, -313, -188, -63, 62, 187, 312, 437, 562, 687, 812, 937, 1062, 1187, 1312, 1450 ], "top": { "tiers": { "1": { "z": 43311, "marks": [ "C1", "C4" ], "a": 11855, "legs": [ 1319, 1315 ] }, "2": { "z": 43211, "marks": [ "C2", "C5" ], "a": 11880, "legs": [ 101, 101 ] }, "3": { "z": 43111, "marks": [ "C3", "C6" ], "a": 11904, "legs": [ 101, 101 ] } }, "src": "D1 정면도 수평선 43,311/43,211/43,111 (반길이 5,942/5,953/5,964), A-A 3단 24곳; a 증가 순서로 단 배정 [추론]; 다리는 선단 경사면과 평행 (x1 98 좌, x2 96 우)" }, "bottom": { "marks": [ "C7", "C8" ], "z_flat": 40511, "half_flat": 1073.9, "R_offset": 12100, "arc_len": 5273, "leg": 650, "src": "D1 정면도 40,511 (X 0~1,074) = 하면 100 위; 곡선부 = 하면 원호와 동심 R 12,100; arc_len = (13,994 - 2,148 - 2x650)/2; 끝 다리 650은 선단 경사면 평행" }, "stirrups": { "loops_y": [ [ -1450, -290 ], [ -870, 870 ], [ 290, 1450 ] ], "x_c10": [ 0, 300, -300, 600, -600, 900, -900 ], "x_c11": [ 1150, 1400, 1650, 1900, 2150, 2400, 2650, 2900, 3150, 3400, 3650, 3900, 4150, 4400, 4650, 4900, 5150, 5400, 5650, 5900 ], "x_c9": [ -1150, -1400, -1650, -1900, -2150, -2400, -2650, -2900, -3150, -3400, -3650, -3900, -4150, -4400, -4650, -4900, -5150, -5400, -5650, -5900 ], "bottom": "z=40,511 for |X|<=1,073.9 else circle R 12,100 about (+-6,951.9, 29,934.6)", "top_right": { "X<3900": 43454.7, "X>=3900": 43598.4 }, "top_left_inferred": { "|X|<1296": 43455, "1296<=|X|<3801": 43383, "|X|>=3801": 43311 }, "b_offset": 54.3, "a_sched": 1407, "c_sched": 750, "src": "D1 정면도 수직선 (우측 절반), A-A 다리 Y 100/680/1,260/1,840/2,420/3,000; 높이 + 54.3 = 재료표 b (C10 2,998, C11 최소 1,664로 확인); 좌측 상단은 소단 - 100 [추론] (C9 최소 1,376과 일치); 재료표 L = 2a + 2b + 2c, 변길이는 b = (최대+최소)/2" }, "loops": { "levels": [ 40761, 41011, 41261, 41511, 41761, 42011, 42261, 42511, 42761 ], "marks_by_level": [ "C12", "C12", "C12", "C12", "C12", "C12", "C13", "C13", "C13" ], "loops_y": [ [ -1423, -317 ], [ -843, 843 ], [ 317, 1423 ] ], "end_inset_face": 100.8, "a_offset": 54.3, "b_sched": 1407, "c_sched": 580, "src": "D1 정면도 수평선 9단 40,761~42,761 @250 (우측 끝 1,548~6,004), A-A 측면 점 Y 127/707/1,233/1,867/2,393/2,973 (스터럽 다리 27 안쪽); 단 끝 = R 12,100 하면 동심원 또는 선단면 - 100.8; 재료표 a = 모델 길이 + 54.3 (C12 3,151~12,228, C13 12,167~12,044 일치); L = 2a + 2b + 4c; 폭 = 작도(1,106/1,686/1,106) (HITL 2026-10-07 확정: 작도 폭)" }, "c14": { "points": [ [ 13, 43088.5 ], [ 913, 43088.5 ], [ -913, 43088.5 ], [ 1913, 43088.5 ], [ -1913, 43088.5 ], [ 2913, 43088.5 ], [ -2913, 43088.5 ], [ 3913, 43088.5 ], [ -3913, 43088.5 ], [ 4913, 43088.5 ], [ -4913, 43088.5 ], [ 13, 43188.5 ], [ 913, 43188.5 ], [ -913, 43188.5 ], [ 1913, 43188.5 ], [ -1913, 43188.5 ], [ 2913, 43188.5 ], [ -2913, 43188.5 ], [ 3913, 43188.5 ], [ -3913, 43188.5 ], [ 4913, 43188.5 ], [ -4913, 43188.5 ], [ 13, 41011 ], [ 1913, 41011 ], [ -1913, 41011 ], [ 13, 42011 ], [ 1913, 42011 ], [ -1913, 42011 ], [ 3913, 42011 ], [ -3913, 42011 ], [ 913, 41511 ], [ -913, 41511 ], [ 2913, 41511 ], [ -2913, 41511 ], [ 913, 42511 ], [ -913, 42511 ], [ 2913, 42511 ], [ -2913, 42511 ], [ 4913, 42511 ], [ -4913, 42511 ], [ 2913, 43442.4 ] ], "a": 2900, "hook": 350, "hook_dir": "down, except hooks_up (HITL 2026-10-07: 갈고리를 아래로 두면 하면 곡선을 뚫는 4본만 위로)", "src": "D1 정면도 철근 점(우측 절반, 대칭 환산; 43,442.4는 우측만 - 좌측 소단에서는 피복 40 미만), A-A 횡선 Y 100~3,000; 41본 일치", "hooks_up": [ [ 1913, 41011 ], [ -1913, 41011 ], [ 2913, 41511 ], [ -2913, 41511 ] ] }, "c15": { "z": 43598.4, "x0": 3816, "x1": 5900, "hooks": [ 350, 350 ], "y_positions": [ -1450, -1313, -1063, -813, -563, -313, -63, 187, 437, 687, 937, 1187, 1450 ], "src": "D1 정면도 수평선 43,598.4 (3,816~5,900 = a 2,084), 수직선 3,816·5,900 갈고리; Y = B-B '10@250' 사슬 13곳" }, "c16": { "z": 43454.7, "x0": -1195, "x1": 4066, "hook_left": 350, "y_positions": [ -1450, -1313, -1063, -813, -563, -313, -63, 187, 437, 687, 937, 1187, 1450 ], "src": "D1 정면도 수평선 43,454.7 (0~4,066, 좌측 미작도) -> a 5,261로 좌단 -1,195 (소단3 좌단 +100); 갈고리 좌단 아래로 [추론]" }, "s1s2": { "s1": { "a": 2400, "leg": 700, "offsets_across": [ -550, -437, -312, -187, -62, 63, 188, 313, 438, 550 ], "z_below_top": 50 }, "s2": { "a": 1100, "leg": 700, "offsets_along": [ -1200, -1125, -1000, -875, -750, -625, -500, -375, -250, -125, 0, 125, 250, 375, 500, 625, 750, 875, 1000, 1125, 1200 ], "z_below_top": 100 }, "src": "D2 교좌면 보강철근 상세: '50','113','7@125=875','113','50' (S1 10) / '50','75','18@125=2.250','75','50' (S2 21), 깊이 '50','50','700'; 거더선 5개 대좌(2,500x1,200, 회전 4.405°) x (10+21) = 50+105; S1 위층 [추론]" } }, "sole_plates": { "table": [ { "no": 1, "S": -1.91, "L": 800, "W": 740, "T": 30, "T1": 38, "T2": 22, "src_y": 12021 }, { "no": 2, "S": -1.907, "L": 800, "W": 740, "T": 30, "T1": 38, "T2": 22, "src_y": 11541 }, { "no": 3, "S": -1.905, "L": 800, "W": 890, "T": 30, "T1": 38, "T2": 22, "src_y": 11061 }, { "no": 4, "S": -1.903, "L": 800, "W": 740, "T": 30, "T1": 38, "T2": 22, "src_y": 10581 }, { "no": 5, "S": -1.901, "L": 800, "W": 740, "T": 30, "T1": 38, "T2": 22, "src_y": 10101 }, { "no": 6, "S": -1.91, "L": 800, "W": 640, "T": 30, "T1": 38, "T2": 22, "src_y": 9621 }, { "no": 7, "S": -1.907, "L": 800, "W": 640, "T": 30, "T1": 38, "T2": 22, "src_y": 9141 }, { "no": 8, "S": -1.905, "L": 800, "W": 750, "T": 30, "T1": 38, "T2": 22, "src_y": 8661 }, { "no": 9, "S": -1.903, "L": 800, "W": 640, "T": 30, "T1": 38, "T2": 22, "src_y": 8181 }, { "no": 10, "S": -1.901, "L": 800, "W": 640, "T": 30, "T1": 38, "T2": 22, "src_y": 7701 } ], "bearing_height": "h3 (D2 ELEVATION TABLE, 181)", "bearing_shrink": 100, "slope_dir": "thicker at -along (front, -Y) [HITL]", "colours": { "bearing": [ 0, 0, 0 ], "sole_plate": [ 150, 150, 150 ] }, "checks": [ { "no": 1, "L_eq_A100": true, "W_eq_B100": true, "end_thick": [ 37.64, 22.36 ], "T1T2": [ 38, 22 ] }, { "no": 2, "L_eq_A100": true, "W_eq_B100": true, "end_thick": [ 37.63, 22.37 ], "T1T2": [ 38, 22 ] }, { "no": 3, "L_eq_A100": true, "W_eq_B100": true, "end_thick": [ 37.62, 22.38 ], "T1T2": [ 38, 22 ] }, { "no": 4, "L_eq_A100": true, "W_eq_B100": true, "end_thick": [ 37.61, 22.39 ], "T1T2": [ 38, 22 ] }, { "no": 5, "L_eq_A100": true, "W_eq_B100": true, "end_thick": [ 37.6, 22.4 ], "T1T2": [ 38, 22 ] }, { "no": 6, "L_eq_A100": true, "W_eq_B100": true, "end_thick": [ 37.64, 22.36 ], "T1T2": [ 38, 22 ] }, { "no": 7, "L_eq_A100": true, "W_eq_B100": true, "end_thick": [ 37.63, 22.37 ], "T1T2": [ 38, 22 ] }, { "no": 8, "L_eq_A100": true, "W_eq_B100": true, "end_thick": [ 37.62, 22.38 ], "T1T2": [ 38, 22 ] }, { "no": 9, "L_eq_A100": true, "W_eq_B100": true, "end_thick": [ 37.61, 22.39 ], "T1T2": [ 38, 22 ] }, { "no": 10, "L_eq_A100": true, "W_eq_B100": true, "end_thick": [ 37.6, 22.4 ], "T1T2": [ 38, 22 ] } ], "src": "D2 솔플레이트 상세 TABLE (NO., S(%), L, W, T, T1, T2); ELEVATION TABLE h3; 사용자 지시 2026-10-08" } }