{ "_schema": "pier-T-expected/1", "_note": "독립 기대값: 도면 치수 문자·표(D1~D3)에서 직접 옮긴 값. 생성용 params.json과 별도로 관리하며 검사기는 params를 읽지 않는다. 원출처: Code/교각모델링/verify_*.py (검증서 v0.1.05).", "pier_id": "P1(광주)", "tol_mm": 1.0, "G1": { "footing": { "dx": 9350, "dy": 7800, "z0": 26207, "thickness": 2200, "src": "D1 '9.350' '7.800' 'EL. 26.208' '2.200'" }, "lean": { "margin": 100, "thickness": 100, "src": "D1 footing +100 each side, 100 thick" }, "column": { "d": 2000, "height": 12227, "src": "D1 '2.000' '12.003'" }, "coping": { "dx": 12400, "dy": 3100, "z_top_left": 43634, "rise_upper": 1500, "rise_lower": 1500, "z_top_right": 43909, "z_top_center": 43765, "flat_from_tip": 5100, "end_inset": 200, "radius": 12000, "src": "D1 '12.400' '3.100' 'EL. 43.411' '1.500' x2 'EL. 43.698' 'EL. 43.555' '5.100' '200' 'R=12.000'" }, "coping_outline": [ [ -1100, 40634 ], [ 1100, 40634 ], [ 6200, 42134 ], [ 6000, 43909 ], [ 3716, 43909 ], [ 3716, 43837 ], [ 1210, 43837 ], [ 1210, 43765 ], [ -1295, 43765 ], [ -1295, 43693 ], [ -3800, 43693 ], [ -3800, 43634 ], [ -6000, 43634 ], [ -6200, 42134 ] ], "coping_outline_src": "D1 정면도 외형 (원호는 현으로 대체 후 활꼴 2개 차감)", "dxf_arc_centres": { "datum_x": 12159.4, "datum_y": 16515.6, "datum_el": 40634, "left": [ 5207.5, 6039.2 ], "right": [ 19111.2, 6039.2 ], "src": "DXF ARC 1C4BF centre; datum CS-CNTL 1C546 / coping bottom line 1C4BD" }, "piles": { "nx": 6, "ny": 5, "pitch": 1550, "edge": 800, "d": 600, "length": 25100, "head_embedment": 100, "src": "D1 '5@1.550' '4@1.550' '800' 'Ø600' 'L=24.4M'; 매입 100 (CS-CNTL)" }, "seats": { "table": { "1": [ 43850, 166, 50, 700, 640 ], "2": [ 43909, 166, 50, 700, 640 ], "3": [ 43981, 166, 50, 700, 790 ], "4": [ 44053, 166, 50, 700, 640 ], "5": [ 44125, 166, 50, 700, 640 ], "6": [ 43822, 139, 50, 700, 540 ], "7": [ 43882, 139, 50, 700, 540 ], "8": [ 43954, 139, 50, 700, 650 ], "9": [ 44026, 139, 50, 700, 540 ], "10": [ 44098, 139, 50, 700, 540 ] }, "table_columns": [ "EL.'X'", "h1", "h2", "A", "B" ], "girders": 5, "step_top": { "1": 43634, "2": 43693, "3": 43765, "4": 43837, "5": 43909 }, "step_x": { "1": [ -6000, -3801 ], "2": [ -3801, -1296 ], "3": [ -1296, 1210 ], "4": [ 1210, 3715 ], "5": [ 3715, 6000 ] }, "row_y": { "front": -698, "rear": 600 }, "pitch_chain": [ 3, 7502 ], "pedestal_plan": [ 1250, 1200 ], "pad_margin": [ 200, 100 ], "rear_first_from_tip": 1232, "src": "D2 ELEVATION TABLE; D1 EL texts + drawn steps; D1 평면도 S1/S2 + D2 TABLE S1 (1550-852 / 1550-950); '3@2.505=7.516'; 대좌 2500x1200 반쪽; '1.232'" } }, "G2": { "schedule_L": { "P1": 17470.0, "P2": 16776.0, "P3": 6718.0, "P4": 5658.0, "P5": 5658.0, "P6": 2136 }, "schedule_n": { "P1": 46, "P2": 46, "P3": 37, "P4": 9, "P5": 22, "P6": 36 }, "dia": { "P1": 32, "P2": 32, "P3": 19, "P4": 19, "P5": 19, "P6": 16 }, "hoop_chain": { "start": [ 150, 1030 ], "groups": [ [ 8, 120 ], [ 22, 120 ], [ 37, 300 ] ] }, "hoop_marks_by_zone": [ [ "P4", 9 ], [ "P5", 22 ], [ "P3", 37 ] ], "tie_chain": { "start": [ 150, 1030 ], "groups": [ [ 8, 1800 ] ] }, "tie_offset": 17.5, "r_outer": 870.5, "r_inner": 825.5, "r_hoop": 901, "main_divisions": 46, "bottom_above_footing": 300, "p1_top_parts": [ 300, 340, 16436 ], "no_fillet_marks": [ "P1", "P2", "P4", "P5" ], "src": "D3 L·수량; D1 '150','1.030','8@120=960','22@120=2.640','36@300=10.800','8@1.800=14.400'; HITL H2 반지름(단면 CAD)·D3 R" }, "G3": { "schedule": { "B1": [ 8000, 38 ], "B2": [ 11500, 38 ], "B3": [ 8000, 38 ], "B4": [ 7600, 35 ], "B5": [ 9550, 32 ], "B6": [ 13050, 32 ], "B7": [ 9550, 32 ], "B8": [ 9150, 29 ], "B9": [ 2155, 493 ], "B10": [ 33684, 9 ], "B11": [ 9350, 28 ], "B12": [ 7800, 34 ] }, "dia": { "B1": 25, "B2": 25, "B3": 19, "B4": 25, "B5": 29, "B6": 29, "B7": 22, "B8": 29, "B9": 16, "B10": 19, "B11": 16, "B12": 16 }, "layer_z": { "B2": 122, "B4": 122, "B6": 178, "B8": 178, "B3": 227.5, "B7": 277, "B1": 2073, "B5": 2127 }, "rows": { "Y_BOT": { "ends": [ -4575, 4575 ], "start": -4375, "pitch": 125, "n": 71 }, "Y_250": { "ends": [ -4575, 4575 ], "start": -4375, "pitch": 250, "n": 36 }, "X_BOT": { "ends": [ -3800, 3800 ], "start": -3625, "pitch": 125, "n": 59 }, "X_250": { "ends": [ -3800, 3800 ], "start": -3625, "pitch": 250, "n": 30 } }, "b10_levels": { "start": 350, "pitch": 200, "n": 9 }, "b10_size": [ 9198, 7644 ], "b9_grid": { "x": { "start": -4125, "pitch": 250, "n": 34 }, "y": { "start": -3500, "pitch": 250, "n": 29 } }, "b9_erec": [ 150, 2100 ], "b9_a": 1995, "b9_c": 64, "mid_levels": [ 550, 950, 1350, 1750 ], "src": "D3 L·수량; D1/D2 '100','200','70@125=8.750' / '35@250' / '100','175','58@125=7.250' / '29@250'; F1 층 높이(작도점); '150','9@200=1.800'; '450','33@250=8.250' / '300','28@250=7.000'; EREC 150~2100; 중간층 작도점 [derived]" }, "G4": { "count": { "C1": 12, "C2": 12, "C3": 12, "C4": 12, "C5": 12, "C6": 12, "C7": 12, "C8": 12, "C9": 60, "C10": 21, "C11": 60, "C12": 6, "C13": 12, "C14": 9, "C15": 41, "C16": 13, "S1": 50, "S2": 105 }, "L": { "C1": 14489.0, "C2": 12080.0, "C3": 12105.0, "C4": 14489.0, "C5": 12080.0, "C6": 12105.0, "C7": 13994, "C8": 13994, "C9": 8634.0, "C10": 10285.0, "C11": 8910.0, "C12": 12502.0, "C13": 22806.0, "C14": 28963.0, "C15": 3600.0, "C16": 2784.0, "S1": 3800, "S2": 2500 }, "range": { "C9": [ "b_sched", 2944, 1376 ], "C11": [ "b_sched", 2944, 1651 ], "C10": [ "b_sched", 2985, 2985 ], "C12": [ "a_sched", 4217, 3151 ], "C13": [ "a_sched", 12228, 5444 ] }, "range_convention": { "b_sched": { "a": 1407, "c": 750, "c_times": 2 }, "a_sched": { "b": 1407, "c": 580, "c_times": 4 } }, "dia": { "C1": 29, "C2": 29, "C3": 29, "C4": 29, "C5": 29, "C6": 29, "C7": 29, "C8": 29, "C9": 25, "C10": 25, "C11": 25, "C12": 25, "C13": 25, "C14": 25, "C15": 19, "C16": 19, "S1": 19, "S2": 19 }, "half_width": 1550, "y24_chain": { "start": [ 100, 237 ], "pitch": 125, "n": 21, "end": 3000 }, "y13_chain": { "start": [ 100, 237 ], "pitch": 250, "n": 10, "end": 3000 }, "pairs": [ [ "C1", "C4" ], [ "C2", "C5" ], [ "C3", "C6" ], [ "C7", "C8" ] ], "tier_z": { "C1": 43534, "C4": 43534, "C2": 43434, "C5": 43434, "C3": 43334, "C6": 43334 }, "stirrup_x": { "C10": [ -900, -600, -300, 0, 300, 600, 900 ], "C11": { "start": 1150, "pitch": 250, "n": 20 }, "C9": { "start": -1150, "pitch": -250, "n": 20 } }, "stirrups_per_x": 3, "c10_bottom": 40734, "loop_z": { "C12": { "start": 40984, "pitch": 250, "n": 6 }, "C13": [ 42484, 42734, 42984 ] }, "c15_top": 43809, "c16_top": 43665, "c14_levels": [ [ 43665.2, 1 ], [ 43411.3, 11 ], [ 43311.3, 11 ], [ 42733.8, 6 ], [ 42233.8, 5 ], [ 41733.8, 4 ], [ 41233.8, 3 ] ], "s_per_girder": { "S1": [ 10, 50 ], "S2": [ 21, 100 ] }, "step_top": { "1": 43634, "2": 43693, "3": 43765, "4": 43837, "5": 43909 }, "src": "D3 수량·L·a/b 범위; D1 A-A 사슬 '100','137','21@125','3000' / B-B '10@250'; 정면도 단 높이·스터럽 X·루프 EL; D2 '50','50'" }, "G5": { "el_x": { "1": 43850, "2": 43909, "3": 43981, "4": 44053, "5": 44125, "6": 43822, "7": 43882, "8": 43954, "9": 44026, "10": 44098 }, "S": { "1": -1.899, "2": -1.897, "3": -1.895, "4": -1.893, "5": -1.89, "6": -1.899, "7": -1.897, "8": -1.895, "9": -1.893, "10": -1.89 }, "W": { "1": 740, "2": 740, "3": 890, "4": 740, "5": 740, "6": 640, "7": 640, "8": 750, "9": 640, "10": 640 }, "L": 800, "T": 30, "h3": 181, "bearing_shrink": 100, "colours": { "bearing": [ 0, 0, 0 ], "sole_plate": [ 150, 150, 150 ] }, "src": "D2 ELEVATION TABLE (EL.'X', h3), 솔플레이트 상세 TABLE (S, L, W, T); (L-100)x(W-100)·색 = 사용자 지시 2026-10-08" }, "rebar_palette": { "32": [ 214, 39, 40 ], "29": [ 255, 127, 14 ], "25": [ 188, 60, 160 ], "19": [ 44, 160, 44 ], "16": [ 31, 119, 180 ] }, "rebar_palette_src": "디자인지침_경로.md R8 (2026-10-07)", "planned_fail": [ { "gate": "G3", "item": "B12 bar count vs schedule", "reason": "작도 28본 채택(F2) vs D3 34본 — OPEN #9", "approved": "사용자 2026-10-07" }, { "gate": "G4", "item_prefix": "C9 original length vs L", "reason": "작도 폭 채택(K1)", "approved": "사용자 2026-10-07" }, { "gate": "G4", "item_prefix": "C10 original length vs L", "reason": "작도 폭 채택(K1)", "approved": "사용자 2026-10-07" }, { "gate": "G4", "item_prefix": "C11 original length vs L", "reason": "작도 폭 채택(K1)", "approved": "사용자 2026-10-07" }, { "gate": "G4", "item_prefix": "C12 original length vs L", "reason": "작도 폭 채택(C12·C13 drawn width)", "approved": "사용자 2026-10-07" }, { "gate": "G4", "item_prefix": "C13 original length vs L", "reason": "작도 폭 채택(C12·C13 drawn width)", "approved": "사용자 2026-10-07" } ] }