On wide screens the pier name moves to the 교각 목록 (name · type), the band is gone and the 3D view takes the full height.
A left stack holds 부재 표시 and then 시점; a right stack holds 색 기준 and then the ⓘ origin note. The active pier is scrolled
into view when it changes. Below 600 px the title is kept above the model and the stacks sit below it.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The title stays. The view buttons become a menu that shows the current view and closes on a choice, Esc or an outside
click. The origin note is an ⓘ toggle. 부재 표시 and 색 기준 are collapsed by default and show their state in the summary
(e.g. 부재 표시 7/7 ▾, 색 기준: 역할 ▾); their open state is remembered per viewer, with guarded storage access.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The title, view buttons and origin sit in one 44 px band on the model. 부재 표시 is a collapsible panel on the left and
색 기준 (③ only) a collapsible panel on the right, both over the canvas, about 170 px wide, with 44 px touch targets.
Below 600 px the band wraps and the panels fall below the model.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
On wide screens the page is one fixed-height frame: the left list, the centre (model band on top, table below) and the
right results each scroll on their own. The model band is 280–560 px (48vh) and the 3D view follows its container
through a ResizeObserver. The table header stays on top. Below 1100 px the panels stack with a 60vh height limit.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Each block takes the skew of its bearing row against the perpendicular of its stretch axis (rowSkewDeg, from the bearing
azimuth). The blocks and pads are turned to that skew, and the S1/S2 bars are drawn in the block frame and turned with
it, so their lengths and embedments do not change. ② shows the row skew (P1: front −4.42°, back −3.11°). Approved
2026-10-23 with the drawing as reference.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The status line and the backup banner share one row (the banner appears only when a backup exists). Results and notices
show as toasts that close after 4 s; problems stay until closed. The status line keeps only the empty-state hint.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
A row can now carry pieces (length, count). C9, C10, C11 and C9·C11 사이 have U and 삿갓 pieces per position (3 loops each);
C12 and C13 have 일자 and ㄷ pieces per bar; P1 and P2 have their splice pieces, each counting all the bars. The
재료표 totals from the pieces, so no bar is left out. 개수 stays the 철근표 count; the piece count is kept beside it. The
삿갓 length h − 100 is an assumption (Q-K5) and is noted on the ④ screen.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The 철근재료표 moves from ③ to a new stage ④ in the header. It shows the checked piers (or the current one), one table
per pier with 강종 → 직경 → 번호 and subtotals, and a total across piers. The Excel export has one sheet per pier and a
합계 sheet. Print uses A4 landscape without the header and buttons. ③ keeps a summary line and a link to ④.
Spec §5, §6.9 and §7 record the stage (approved 2026-10-23).
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The quantity table sits below the 철근표 for the whole pier. Lines group by grade and nominal diameter, with
subtotals, unit weight 0.00617·d² (kg/m), the total in kg and ton, and a 할증 total. 할증 is an input in 공통 설정,
default 0 as an assumption. Couplers are counted, not weighed. Bars with no length yet (C9, C10, C11, C12, P1, P2) are
listed as missing and kept out of the totals. The table exports to Excel with SheetJS.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Bars drawn through several points are one tube each, with every bend rounded by R·tan(φ/2) at the centre-line radius
(inner factor × d + d/2). The inside-radius factors (D16 and below, D19–D25, D29–D35, D38 and above) are inputs in 공통
설정, with KDS-based defaults 2 / 3 / 4 / 5. The size-class limits sit in one place (SIZE_CLASS), which also fixes
D25 (25.4) being read as the D29–D35 class in hookLength. The helper bendDeduction gives the centre-line deduction for
the length option, which is not yet applied to the 철근표 lengths.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The 철근표 has a selection checkbox per row. Select-all / clear and 선택만 보기 sit above the table. In 선택만 보기 the other
bars are hidden in 3D and the members stay at 50% for context. A 3D click or an alert [보기] selects one bar; the
selection clears when the member tab or the pier changes. The selection is screen state and is not saved to the project.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
fyH and fyS become a grade per prefix (D · H · S), chosen from SD300 · SD400 · SD500. The defaults are the P1 values, so
the P1 results do not change. Each bar takes its grade from its 규격 (fyOf). The 철근표 has a 강도 column. Older files
that stored fyH / fyS are read into the grade map. Only fck is still an assumed value (I02). Approved 2026-10-23.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
On ③ the members, the ground and the blinding concrete are drawn at half opacity without depth writes, so the bars show
through. Outside ③ each part returns to its own opacity. Rebar colours are shaded to 0.8 and slightly glossier so they
read through the members. Approved 2026-10-23.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The colour basis control and legend sit below the 3D canvas and show only on ③, so they belong to the model window.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Role colours stay the default (spec §6.7). A control on ③ switches to diameter (nominal size, H and S of one size
share a colour, Okabe–Ito palette) or member (받침블럭 · 코핑 · 기둥 · 확대기초). The legend lists only the items
the model has. Highlighting and the state colours are unchanged. Approved 2026-10-23.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The fck row on ② no longer uses the orange changed style, since fck does not change the shape and is not counted in 변경 n건.
The row says 배근에만 반영 instead.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Each member can take its own fck on its ② card. A member without one uses the ③ 공통 fck, and fy stays common.
The rebar table and the 3D model both read the resolved value. The I02 note stays until every fck member has its
own value. The project file stores the values as optional fckByMember and refuses a bad value on open.
Changing the fck is not a shape change, so it is not counted in the pending changes.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The stair bars in the 철근표 and the 3D model, and the 3D bottom and column bars, were built with the default fck,
so a changed fck did not reach them. buildRebar3D now takes the material, and a material change rebuilds the scene.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- The 3D model of ③ draws each bar family from the rebar modules (coping top and
bottom bars, shear loops, side bars, column bars and ties, footing B1–B8, bearing
S1/S2) and names every bar as its 철근표 number.
- A table row click highlights the bar in 3D (the others dim); a click on a 3D bar
selects its row in the table and sets the member tab. Drags still rotate.
- The rebar is shown only on ③. Not drawn yet: C14, C15/C16, B9–B12, the couplers,
and the bars of a bent coping.
- Tests: family names and counts (P1 46), highlight behaviour.
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The 3D viewer (views, canvas, part toggles) moves into a slot at the top of ②
and ③ while those screens are shown, and back to ① otherwise. Moving the
element keeps the WebGL context; the viewer is measured after its screen is
visible.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The ③ screen had no pier list. The left column now has the 교각 목록 with
checkboxes and a 배근 status (계산됨 / 오류), the 선택 n기 line with 속성 복사…,
then 부재 · 배근 타입. The checks are shared with ① and ②.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The segment table lists each column's Level and the segments between columns
(추천안, Q-K2), so a 2주형 shows 좌 경사 3, Level 1 9, Level 2 9, 기둥 사이 1 18,
우 경사 3. One column is unchanged.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Segments of C9 (좌 경사), C10 (Level), C11 (우 경사): first and last bar in
metres, spacing, count, and bar number. From the bar positions (코핑철근.md §3).
- Test: 0.300–4.550 (18 @250), 4.800–7.200 (9 @300), 7.450–11.700 (18 @250).
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
[보기] only switched the member tab. The alert now names its bar (RB-F08 → B2),
and [보기] switches to the member, highlights that row, and scrolls to it.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- 철근표 columns as in the 시안: 구분 · 번호 · 규격 · 간격 · 실간격 · 위치 · 방향 ·
형상 · 길이 · 개수 · 근거 · 비고. Metadata per bar from the rebar documents.
- 근거 badges: 입력 / 기본값 / 계산 / 가정 (the 가정 badge is italic amber).
- 번호 click highlights that row.
- 알림: [보기] opens the member tab; I02 [입력] focuses the fck input.
- Member tabs show the warning count.
- 공통 설정 moved to the right column (알림 → 검토 필요 → 공통 설정), as in the 시안.
- The 시안's "fck를 입력해야 생성" blocker is not used: the defaults are assumed
values (I02), as decided on 2026-10-22.
- Not in this step: the drawings and the 정면·단면 연동 (시안 도면 뷰어).
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Material {fck, fyH, fyS}, defaults 27 / 400 / 500 as assumed values (I02).
The rebar calculations take the material: the C7/C8 splice, the P2 development
length, the P3 lap, and the B2 split use it instead of fixed numbers.
- ③ screen: 공통 설정 inputs with a note that the defaults are assumed (I02).
- Project file stores the material as an optional field; older files open with
the defaults.
- Tests: fck 27 → 35 shortens the laps by √(27/35); the C7 piece follows fck;
a non-default fy drops I02; the file round trip.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The highlight is the 'current' class, but the stage switch only changed
aria-current, so ① stayed highlighted while ③ was shown. The switch now moves
the class with aria-current.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- The 번호·규격 and 비고 columns of the ③ table read left to right; the note
wraps instead of stretching the table.
- C14 note: "위 2줄 11본씩, 아래 5 · 6 · 3 · 2 (합 38)".
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Setting the project name programmatically does not fire 'input', so the apply
button stayed disabled after 샘플 P1 사용 even with P1 checked. The button is
now refreshed after the names are filled.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- The sample button and ?sample=1 fill the project name 운곡교P1 and the bridge
name 운곡교. The sample is RAG/운곡교P1입력.xlsx.
- Test: the app's copy stays byte-identical to the RAG file (skipped when the
RAG folder is absent) and reads one pier, P1, T형, 말뚝기초, 10 bearings.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Footing (확대기초철근 (1).md): grid counts from W and L, layer heights,
B1–B4 and B5–B8 counts and lengths (B2 13646, B6 11396), B10-1/B10-2,
B11 (60) and B12 (47) with their lengths. B9 is not computed yet.
- rebarSummary: one 철근표 per pier from the model (bearing, coping, column,
footing), with alerts: RB-F08 (B2 needs a splice, Q-B6), RB-F09 (B9 not
computed).
- ③ screen v1: stage nav button, member tabs (받침블럭 · 코핑 · 기둥 · 확대기초),
rebar table with 번호 · 규격 · 개수 · 길이 · 비고, alert list, and the open
questions (Q-B5, Q-B6, Q-C9). Drawings and the 강조 연동 are not in v1.
- Tests: footing values from the document; P1 summary totals; warnings.
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- A 열 is one row across the footing width; each has its own count along the
length. Default floor((L − 1400) / 2250) + 1 per 열, as in spec §4.6.
- Counts are validated: one per 열, whole numbers 2–30. Spacing below the
2250 mm minimum is shown as a warning, not refused (the plan's 6본 → 5@1800
example).
- PierInput gains an optional pileRows; absent means the defaults, so existing
files and the P1 results are unchanged.
- Change tracking compares arrays by value; 열별 본수 can be reverted and
copied (copy item off by default).
- The footing card has −/+ per 열 with spacing, total, and the display string.
- Tests: defaults 4열 × 5본 = 20 and the 1단계 text; 6본 → 5@1800; limits;
model-level 21 piles.
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- C5: each member's options come from one table. Only the defaults (the 1단계
model) are selectable. The others show as disabled chips with 규칙 미정 (Q6).
The member summary is built from the defaults.
- C6: 전체 선택 acts only on visible, buildable piers; it reads 선택 해제 only
when all of those are checked. A check survives a change of the type filter.
The pier list scrolls past 300 px, for 20 piers.
- Tests: defaults are the only choices; unknown options refused; the 20-pier
mixed list with two failed piers; filter and check persistence.
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- ① and ② are switched from the stage nav. ② shows the pier list with change
counts, the five members (교량받침, 코핑, 기둥, 확대기초·말뚝, 지반·지층) with
a change count each, a member card, and a change list with per-item revert.
- The member card shows 기본 and 선택 summaries separately. Only members with
existing inputs get fields (코핑 폭·길이, 말뚝 길이); the others show values
and a note that their inputs come in a later step. Unselected members' inputs
are not shown.
- The field rows are shared between ① and ②.
- Added a global [hidden] rule so hidden screens stay hidden.
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- 속성 복사… opens the four-step dialog: source (current inputs), items,
targets (same-type filter on by default), and a preview with changed values
and skipped items per target. Apply changes only the visible, ticked targets.
- Items that the model does not have yet (기둥, 받침, 배근, 기초 형상) are shown
as 예정 and disabled. Coping length and pile length are off by default.
- Option: regenerate the targets right after applying (default on); otherwise
they show as 재생성 필요 through the normal change tracking.
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Header follows the mockup: dark bar, project line, stage chips (② shows the
pending change count), save status, 저장 / 엑셀 불러오기 / 프로젝트 열기 and
the primary 선택 교각 다시 생성 · 변경 n button.
- Left column: pier list with header row, 선택 n기 bulk bar, 입력값 and the
2단계 input card. The bottom input panel is gone.
- First save opens 시안 ⑤ (project name, bridge, client, author, 좌표계, memo);
later Ctrl+S / 저장 write the same file, as the spec's B5 requires.
- Project info (client, author, 좌표계, memo) is kept in the project file.
- Style layer uses the mockup's tokens (#18212B header, #1F5FA8 primary,
#D5DBE2 borders, #E3EDF8 selected row, JetBrains Mono for numbers).
- Not reflected: ② and ③ screens (not built yet), and the mockup's static
front preview (the app draws the model in 3D). Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Three values per pier: defaults (as imported), input (generated), draft
(current cards). Overrides = draft vs defaults; pending = draft vs input.
- Editable now: 코핑 폭, 코핑 길이, 말뚝 길이. Changing a card does not touch the
3D view until 다시 생성; the header and the card show 변경 n.
- Revert puts a field back to its imported default.
- Project files store defaults and draft (optional; v1 files still open).
- Tests: 코핑 폭 3100 → 3300 gives one override and one pending change;
regenerating clears pending but keeps the override; revert; file round trip.
- Not verified in a browser (no debuggable Chrome in this session).
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- 저장 (Ctrl+S) downloads <교량명>_교각설계.pzr.json; 프로젝트 열기 reads it
back and regenerates every pier without the source workbook.
- Save status in the header: 저장 전 / 변경 있음 · 미저장 / 저장됨. The
snapshot excludes the history so a save is not counted as a change.
- Auto-backup to IndexedDB 0.8 s after changes while unsaved; on start a banner
offers recovery or discard. Storage failures are reported, not fatal.
- beforeunload warns while there are unsaved changes.
- B1 (default-vs-changed tracking) is not added yet: inputs are not editable
until the 2단계 input cards exist.
- Not verified in a browser (no debuggable Chrome in this session).
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- buildPier builds on buildAxis: each object carries its stretch k and a local
s from that stretch's base; coping parts are per stretch with the mitre plane
trimming the overlap in the scene (renderer.localClippingEnabled).
- Straight P1 output is unchanged (regression tests pass).
- Bent coping is supported for 현장타설말뚝 only; footings and piles on a bent
axis remain 미실시 until stage 3. Kink outside the coping and columns within
the Level half-width of the kink are refused.
- W03/W04 use coping coordinates (g).
- Tests: constructed 60° bend — world coordinates of bearings, blocks and the
column survive the stretch frames; mitre sides; scene mesh count; refusals.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- public/samples/운곡교P1입력.xlsx is a byte copy of RAG/운곡교P1입력.xlsx
- loadP1 and the sample loader read the three-sheet input
- spec workbook (intent.PR) stays for the single-sheet regression tests
- test: input file has sheets 교각 · IP · 받침 and parses to P1 with no issues
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- buildTemplateWorkbook: 교각 · IP · 받침 sheets with the headers the parser
reads; value cells left empty so no blank-name rows raise E05
- dialog button 입력 템플릿 다운로드 (.xlsx)
- tests: sheet order, parser recognition, write-and-read round trip
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- one workbook may hold the three tables on separate sheets (user decision,
recorded in DOC/03_설계); spec 2.2 one-sheet-per-pier is superseded
- E05 for rows whose 교각명 has no matching 교각 정보 row, or a pier missing IP/받침
- helper sheets (IP only, 받침 only) are shown as 보조 표 시트, not selectable
- test: three-sheet workbook built from the P1 sheet
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- E05: a sheet whose pier, IP, or bearing table is not on the same sheet is
not selectable (spec 2.2: one sheet per pier)
- a sheet is selectable only if every pier in it builds; the reason is shown
next to the sheet instead of a selectable sheet with an unchecked pier
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- main screen follows 시안 ①: header steps, pier list with type filter and
multi-select, viewer with 아이소/정면/측면/평면, part toggles in mockup order,
input panel and result sections
- import moved to a modal dialog following 시안 ④: project name (required),
file drop and pick, per-sheet recognition with selectable piers, preview of
pier and bearing tables, glossary of Excel column names
- Esc closes the dialog and focus stays inside it (native dialog)
- 44px touch targets and 2px focus rings; colours from the mockup tokens
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- parseWorkbook returns a report per sheet (table counts, issues, ok)
- sheets with E-level issues cannot be selected (spec section 2.3)
- pier input carries its source sheet name
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- three.js scene in the pier frame (pivot at first column centre)
- coping as extruded elevation outline; columns, footings, piles, blinding, bearing blocks and pads
- four view presets, per-part visibility toggles
- workbook load (sample or file), result table, issue list and undetermined defaults
- frame orientation test and bounding-box test
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
