- Blocks, solplates, and the dashed drawing outlines are turned by the bearing's
방위 (rowSkewDeg), the same turn as the 3D block; each bearing is labelled
with its 방위 in degrees.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Blocks, solplates, and bearing centres sit at their real 교각축 positions;
the pair's offset is not aligned away. The 편심 is written on the figure.
- C4 and C5 dimensions run from the block edges to the bearings.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- bearingEdgeDistances measures along the 교각축: 분리 600 / 600; 일체 from the
pair block centred on the mean 교각축 position (P1 outer margins 557).
- Table headings updated; C1 · C2 · C3 on the plan are measured on the 교축 from the drawn positions.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- C4 runs from the block top edge to the bearing row, C5 from the bearing row
to the bottom edge. The values are the model's C4 and C5.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Blocks and solplates are drawn on one line across the 교축; the 교각축 offset
of the bearings is written as text.
- Arrows for the 교축 (horizontal) and the 교각축 방향 (vertical).
- Dimensions along the bottom: C1 (bearing to block edge), C2 (between the
bearings), C1, and C3 (block span).
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- A 일체 pair's inner sides face the other bearing, so they are not C4 or C5:
they are null and shown as "—" in the 배치 규칙 table.
- The table headings now describe the 교축 margins (bearing to the outer block edge).
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- bearingEdgeDistances now reads the block geometry: 분리 1200 blocks are
centred on the bearing (600 / 600); 일체 uses the pair's 2500 block (outer
margins 601, within the 5 mm tolerance of 600).
- The plan labels C4 and C5 from these values; the coping-edge definition is removed.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- C4·C5 measured across the coping width (교각축 직각): the two coping edges
at ±B/2 to the bearing centre. The former along-the-axis definition is replaced.
- view/bearing-plan-svg.ts: the plan of one pair with the model's solplates
and the block outline(s) (일체: one 2500 × 1200; 분리: two 1200 × 1200), and
the drawing A/B overlaid as dashed outlines.
- ② bearing card: 상세 보기 pair chips (①·⑥ …) and the overlay toggle.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
