- 단마다 양끝이 안으로 들어가는 양을 2d에서 d로 변경
- 상면 단 길이 12744 / 12686.8 / 12629.6 (기존 12744 / 12629.6 / 12515.2)
- 3D 상면 주철근의 굽힘 시작점도 같은 값을 쓴다
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- 세로 단 간격은 입력(기본 100, 범위 80–120)으로 상면 C1–C6, C14 상면, 기둥 C3 높이에 쓴다
- 가로 단 간격은 2d(H29, 57.2 mm)로 고정 (코핑철근.md의 s_lay 하나를 둘로 나눔)
- P1 기준 값 갱신: 상면 높이 43.284 / 43.184 / 43.084, C14 상면 43.208 / 43.108, P1 위 끝 zTop1 14776
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- rebar3d records every bar (name, stretch, local points, diameter) next to its
mesh, so the 2D drawings use the same data as the 3D view.
- view/coping-rebar-svg.ts: the 정면 (along the coping length, EL vertical) and
the 단면·폐합 at a chosen station (the bars crossing it, C9–C11 loops included).
- ③ coping tab: 정면 / 단면·폐합 toggle and the station input.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- PierInput.blockRebar (partial): cover top, side cover, first gap, spacing S1
and S2 (separate), leg length. Defaults are the P1 values, so P1 is unchanged.
- S2 depth = top cover; S1 depth = top cover + S1/2 + S2/2 (H19: 69.1 at the default).
- The model carries the settings; the bearing-block rebar, the 3D bars, and the
summary use them.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- integrated-block.ts: per pair (전열 k · 후열 k) one block centred on the
pair midpoint, 2500 across the 교축 and 1200 along the 교각축, with a
stepped top (each half to its own bearing row top). Only when 일체 is chosen
and every pair is within 100 mm; otherwise 분리 is kept (B02).
- Rebar: S2 19 bars at 125 across the 2500 (10 front half, 9 back half), each
leg from its half's top; S1 8 bars across the 1200, 3800 long, depth from
the lower top. Totals per pier: S1 40, S2 95 (분리: 80 / 80).
- Scene and 3D rebar draw the stepped blocks instead of the per-bearing blocks.
- The per-bearing blocks stay for the solplate, the pads, and the body.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Hc = Level underside − footing top, and h_cop = step top at the column centre − Level underside. P1 gives 12703 and 2644,
unchanged. With taper h2 = 3000 the Level underside moves down, so Hc = 11203 and the P2 top (Level underside + l_d)
moves to 13039, while the P1 top stays at the step top (15147). The 3D and the 철근표 use the same heights.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
C12 and C13 come from one grid from the Level underside + 127 at 250 mm, up to top − 400 mm (상면 여유). The fixed count of
seven rows is kept only for callers that give no top. P1 is unchanged (C12 5, C13 2); a taper of 3000 mm now gives C12 11
and C13 2, and the C13 first row is always the last C12 row plus 250.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The split between C12 and C13 follows the end underside, not a fixed level: C12 rows lie between the Level underside and
the end underside (taper height h2), C13 rows between the end underside and the top (end height h1). The break is the end
underside + 127 mm, the taper line's start at the end face. P1 is unchanged (C12 41.288–42.288, C13 42.538–42.788). Tests
check the band rule for h1 and h2 changes.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The three values are inputs on the coping card, with the P1 values (1000 · 1500 · 2100) when absent, and they are tracked
like the other shape inputs. The geometry and the coping rebar read them from one CopingGeom: the U heights follow the
closed form (h1 − 2c) + h2·min(x_s, x_L0)/x_L0, which reproduces the P1 values. The side rows are assumed to keep their
position relative to the Level underside (명세 확인 필요). P1 results are unchanged; the full suite passes.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Each block takes the skew of its bearing row against the perpendicular of its stretch axis (rowSkewDeg, from the bearing
azimuth). The blocks and pads are turned to that skew, and the S1/S2 bars are drawn in the block frame and turned with
it, so their lengths and embedments do not change. ② shows the row skew (P1: front −4.42°, back −3.11°). Approved
2026-10-23 with the drawing as reference.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Bars drawn through several points are one tube each, with every bend rounded by R·tan(φ/2) at the centre-line radius
(inner factor × d + d/2). The inside-radius factors (D16 and below, D19–D25, D29–D35, D38 and above) are inputs in 공통
설정, with KDS-based defaults 2 / 3 / 4 / 5. The size-class limits sit in one place (SIZE_CLASS), which also fixes
D25 (25.4) being read as the D29–D35 class in hookLength. The helper bendDeduction gives the centre-line deduction for
the length option, which is not yet applied to the 철근표 lengths.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The three 폐합 of one position were drawn at the same x, so their U bars overlapped. Loop i now sits at x + i·2d and its
삿갓 one bar (d) beside its U, so no U meets another loop's U or 삿갓. The 철근표 counts and lengths are unchanged.
The rule is geometry only; the spec (§4.3) needs the stacking note.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The 철근표 has a selection checkbox per row. Select-all / clear and 선택만 보기 sit above the table. In 선택만 보기 the other
bars are hidden in 3D and the members stay at 50% for context. A 3D click or an alert [보기] selects one bar; the
selection clears when the member tab or the pier changes. The selection is screen state and is not saved to the project.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
On ③ the members, the ground and the blinding concrete are drawn at half opacity without depth writes, so the bars show
through. Outside ③ each part returns to its own opacity. Rebar colours are shaded to 0.8 and slightly glossier so they
read through the members. Approved 2026-10-23.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Role colours stay the default (spec §6.7). A control on ③ switches to diameter (nominal size, H and S of one size
share a colour, Okabe–Ito palette) or member (받침블럭 · 코핑 · 기둥 · 확대기초). The legend lists only the items
the model has. Highlighting and the state colours are unchanged. Approved 2026-10-23.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Each member can take its own fck on its ② card. A member without one uses the ③ 공통 fck, and fy stays common.
The rebar table and the 3D model both read the resolved value. The I02 note stays until every fck member has its
own value. The project file stores the values as optional fckByMember and refuses a bad value on open.
Changing the fck is not a shape change, so it is not counted in the pending changes.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The stair bars in the 철근표 and the 3D model, and the 3D bottom and column bars, were built with the default fck,
so a changed fck did not reach them. buildRebar3D now takes the material, and a material change rebuilds the scene.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- The 3D model of ③ draws each bar family from the rebar modules (coping top and
bottom bars, shear loops, side bars, column bars and ties, footing B1–B8, bearing
S1/S2) and names every bar as its 철근표 number.
- A table row click highlights the bar in 3D (the others dim); a click on a 3D bar
selects its row in the table and sets the member tab. Drags still rotate.
- The rebar is shown only on ③. Not drawn yet: C14, C15/C16, B9–B12, the couplers,
and the bars of a bent coping.
- Tests: family names and counts (P1 46), highlight behaviour.
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
