The pile-count card (−/+ and the 20본 total) is on the left and the plan on the right, in one row; the side view is below.
Changing a count is now seen on the plan next to it. The layout stacks below 800 px.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The footing card shows a plan (footing rectangle, pile circles, column, pier axis, mm labels) and an elevation (footing,
piles to their tips, column, h1 and pile length). The drawings are SVG strings built from the model, so they follow the
inputs. θ is noted as not yet applied. Tests check the pile count, the mm labels and the width input.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The footing card takes L, W, h1 (default 2000), the blinding margin on each side (100) and thickness (100). The pile is picked
from the 강관 or PHC list by outer diameter and wall; the inner diameter, area and weight are read from the list. Defaults are
the 1단계 constants, so P1 is unchanged. The model reads them (footing width, height, blinding, pile diameter; the footing
length for grouping). 복합 말뚝 and the rule-pending items stay disabled; the footing rebar is not yet tied to these
inputs (1·2단계 후).
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Single-piece lengths such as the B9 and C7 pieces showed long unrounded decimals (2128.1174619702915). They are rounded to
0.1 mm for display and in the Excel rows; the totals are unchanged.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
D is an input on the column card (default 2000 mm). The 3D column, the piles of a cast-in pier and the column rebar follow it;
n_div stays 46. Three checks run on each regenerate and appear in 알림: D below the Level width (2100), D + 2c within the
coping width, and the 주철근 arc spacing ≥ max(1.5·d_b, 40). Spec §5.2 records the rule (approved 2026-10-23).
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The solplate's L (A + margin) runs across the 교각축 직각 and its W (B + margin) along the 교축; the top tapers across L with
T1 at the (−) side (T1 = T + L·|S|/200). The 교량받침 본체 is one box per bearing: the solplate plan less 100 mm on each
side, from the mortar top (EL.X) up h3 = 181 mm, turned with the bearing row. It is shown with the bearing group.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
"도면값 채우기" set only EL.X, h1 and h2, so no solplate was drawn. It now also sets A, B and the solplate slope S from the
reference values. The bearing card warns how many bearings lack A, B or S.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Each bearing gets a solplate wedge: tapered along the 교축 with T1 on the 시점 side, underside at the bearing top (block
top + h3). A, B come from the drawing's ELEVATION table, S and T1/T2 from the SOLPLATE table (NO, S(%), L, W, T, T1, T2),
read by position. The 공통 규칙 (T 30, margin 100, h3 181) feed the plan; changing them regenerates the piers. A new
"솔플레이트" part can be shown or hidden. A solplate table is read only when its S values are found; a missing S is reported.
Also commits the option-1 test change (drawing EL.X minus Excel z).
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The reader takes TEXT and MTEXT entities (x, y, text). The EL.X header row names the columns; the No column holds the
bearing numbers; each value is the nearest entry under its header on the same row. On the 운곡교 교각도(2) drawing all ten
bearings read back the reference values (EL.X, h1, h2). The 도면 불러오기 button accepts .dxf as well as sheets. The test
fixture holds only the table's text entries.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The sheet needs the header names No, EL.X, h1 and h2 (case, spaces, dots and units in parentheses are ignored). Rows are
checked: No must be a unique positive integer, EL.X must be in metres (30–100), h1 and h2 must be positive mm up to 1000.
Any error stops the import with the first messages; a valid sheet fills this pier's drawing values and regenerates the
pier. The parser is pure and tested.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The project has one basis: 엑셀 z (default) or 도면 EL.X. On ②, the bearing card lists EL.X, h1 and h2 for each bearing
(per pier), with a button to fill the reference values. With the drawing basis the model takes the drawing EL.X as the
bearing height; the coping tops stay within the 5 mm tolerance, the front block is 164 mm and the back 139 mm (excluding the
pad). The check compares EL.X − h1 − h2 with the Excel-basis coping top. The basis and the drawing values are saved in the
project file (optional fields). Changes regenerate every pier at once.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
With this definition the drawing's coping top matches the model's coping top to within 1 mm on all ten bearings. The earlier
0.211 m offset came from reading EL.X as the solplate top, which was wrong. The reference table now uses EL.X − h1 − h2,
and the check tests the match.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
On the bearing card, four inputs drive E = h1 + h2 + h3 + h4, L = A + margin, W = B + margin and T1/T2 = T ± L·|S|/2. The
defaults are the drawing values, so every row gives back the drawing values; changed rows are marked. The values are screen
state for now and do not change the model or the project file (Q16 stays open).
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The solplate tapers along the bridge axis. T is the centre thickness (30), T1 the thickness on the 교각축 직각 (−) side
(38) and T2 on the (+) side (22); T1 + T2 = 2T. The table's T column had shown the (−) side value, so T is now 30 on every
row. A test checks T1 + T2 = 2T.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The P1 상세도 ELEVATION TABLE and 솔플레이트 TABLE are shown on the bearing card. The model does not use them (Q16). The
ELEVATION table compares the drawing's coping top (EL.X − E) with the model's coping top; the difference is a constant
0.211 m on all ten bearings. The solplate table checks T1 and T2 against T ± L·|S|/2 with the 공통 규칙 T = 30 mm; all
rows match. Tests check E = h1+h2+h3+h4, L and W, the T1/T2 rule, and the constant offset.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The three values are inputs on the coping card, with the P1 values (1000 · 1500 · 2100) when absent, and they are tracked
like the other shape inputs. The geometry and the coping rebar read them from one CopingGeom: the U heights follow the
closed form (h1 − 2c) + h2·min(x_s, x_L0)/x_L0, which reproduces the P1 values. The side rows are assumed to keep their
position relative to the Level underside (명세 확인 필요). P1 results are unchanged; the full suite passes.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The coping card lists d_IP2 and a table of the step segments: range, front and back coping tops, the lateral step, and
the block heights including the 50 mm pad (150 / 200 as in the 삽도). The table is read from the model; nothing new is
computed or entered. Tests check the P1 values against the 삽도.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
On wide screens the pier name moves to the 교각 목록 (name · type), the band is gone and the 3D view takes the full height.
A left stack holds 부재 표시 and then 시점; a right stack holds 색 기준 and then the ⓘ origin note. The active pier is scrolled
into view when it changes. Below 600 px the title is kept above the model and the stacks sit below it.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The title stays. The view buttons become a menu that shows the current view and closes on a choice, Esc or an outside
click. The origin note is an ⓘ toggle. 부재 표시 and 색 기준 are collapsed by default and show their state in the summary
(e.g. 부재 표시 7/7 ▾, 색 기준: 역할 ▾); their open state is remembered per viewer, with guarded storage access.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The title, view buttons and origin sit in one 44 px band on the model. 부재 표시 is a collapsible panel on the left and
색 기준 (③ only) a collapsible panel on the right, both over the canvas, about 170 px wide, with 44 px touch targets.
Below 600 px the band wraps and the panels fall below the model.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
On wide screens the page is one fixed-height frame: the left list, the centre (model band on top, table below) and the
right results each scroll on their own. The model band is 280–560 px (48vh) and the 3D view follows its container
through a ResizeObserver. The table header stays on top. Below 1100 px the panels stack with a 60vh height limit.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Each block takes the skew of its bearing row against the perpendicular of its stretch axis (rowSkewDeg, from the bearing
azimuth). The blocks and pads are turned to that skew, and the S1/S2 bars are drawn in the block frame and turned with
it, so their lengths and embedments do not change. ② shows the row skew (P1: front −4.42°, back −3.11°). Approved
2026-10-23 with the drawing as reference.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The status line and the backup banner share one row (the banner appears only when a backup exists). Results and notices
show as toasts that close after 4 s; problems stay until closed. The status line keeps only the empty-state hint.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
A row can now carry pieces (length, count). C9, C10, C11 and C9·C11 사이 have U and 삿갓 pieces per position (3 loops each);
C12 and C13 have 일자 and ㄷ pieces per bar; P1 and P2 have their splice pieces, each counting all the bars. The
재료표 totals from the pieces, so no bar is left out. 개수 stays the 철근표 count; the piece count is kept beside it. The
삿갓 length h − 100 is an assumption (Q-K5) and is noted on the ④ screen.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The 철근재료표 moves from ③ to a new stage ④ in the header. It shows the checked piers (or the current one), one table
per pier with 강종 → 직경 → 번호 and subtotals, and a total across piers. The Excel export has one sheet per pier and a
합계 sheet. Print uses A4 landscape without the header and buttons. ③ keeps a summary line and a link to ④.
Spec §5, §6.9 and §7 record the stage (approved 2026-10-23).
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The quantity table sits below the 철근표 for the whole pier. Lines group by grade and nominal diameter, with
subtotals, unit weight 0.00617·d² (kg/m), the total in kg and ton, and a 할증 total. 할증 is an input in 공통 설정,
default 0 as an assumption. Couplers are counted, not weighed. Bars with no length yet (C9, C10, C11, C12, P1, P2) are
listed as missing and kept out of the totals. The table exports to Excel with SheetJS.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Bars drawn through several points are one tube each, with every bend rounded by R·tan(φ/2) at the centre-line radius
(inner factor × d + d/2). The inside-radius factors (D16 and below, D19–D25, D29–D35, D38 and above) are inputs in 공통
설정, with KDS-based defaults 2 / 3 / 4 / 5. The size-class limits sit in one place (SIZE_CLASS), which also fixes
D25 (25.4) being read as the D29–D35 class in hookLength. The helper bendDeduction gives the centre-line deduction for
the length option, which is not yet applied to the 철근표 lengths.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The 철근표 has a selection checkbox per row. Select-all / clear and 선택만 보기 sit above the table. In 선택만 보기 the other
bars are hidden in 3D and the members stay at 50% for context. A 3D click or an alert [보기] selects one bar; the
selection clears when the member tab or the pier changes. The selection is screen state and is not saved to the project.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
fyH and fyS become a grade per prefix (D · H · S), chosen from SD300 · SD400 · SD500. The defaults are the P1 values, so
the P1 results do not change. Each bar takes its grade from its 규격 (fyOf). The 철근표 has a 강도 column. Older files
that stored fyH / fyS are read into the grade map. Only fck is still an assumed value (I02). Approved 2026-10-23.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
On ③ the members, the ground and the blinding concrete are drawn at half opacity without depth writes, so the bars show
through. Outside ③ each part returns to its own opacity. Rebar colours are shaded to 0.8 and slightly glossier so they
read through the members. Approved 2026-10-23.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The colour basis control and legend sit below the 3D canvas and show only on ③, so they belong to the model window.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Role colours stay the default (spec §6.7). A control on ③ switches to diameter (nominal size, H and S of one size
share a colour, Okabe–Ito palette) or member (받침블럭 · 코핑 · 기둥 · 확대기초). The legend lists only the items
the model has. Highlighting and the state colours are unchanged. Approved 2026-10-23.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The fck row on ② no longer uses the orange changed style, since fck does not change the shape and is not counted in 변경 n건.
The row says 배근에만 반영 instead.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Each member can take its own fck on its ② card. A member without one uses the ③ 공통 fck, and fy stays common.
The rebar table and the 3D model both read the resolved value. The I02 note stays until every fck member has its
own value. The project file stores the values as optional fckByMember and refuses a bad value on open.
Changing the fck is not a shape change, so it is not counted in the pending changes.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The stair bars in the 철근표 and the 3D model, and the 3D bottom and column bars, were built with the default fck,
so a changed fck did not reach them. buildRebar3D now takes the material, and a material change rebuilds the scene.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- The 3D model of ③ draws each bar family from the rebar modules (coping top and
bottom bars, shear loops, side bars, column bars and ties, footing B1–B8, bearing
S1/S2) and names every bar as its 철근표 number.
- A table row click highlights the bar in 3D (the others dim); a click on a 3D bar
selects its row in the table and sets the member tab. Drags still rotate.
- The rebar is shown only on ③. Not drawn yet: C14, C15/C16, B9–B12, the couplers,
and the bars of a bent coping.
- Tests: family names and counts (P1 46), highlight behaviour.
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The 3D viewer (views, canvas, part toggles) moves into a slot at the top of ②
and ③ while those screens are shown, and back to ① otherwise. Moving the
element keeps the WebGL context; the viewer is measured after its screen is
visible.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The ③ screen had no pier list. The left column now has the 교각 목록 with
checkboxes and a 배근 status (계산됨 / 오류), the 선택 n기 line with 속성 복사…,
then 부재 · 배근 타입. The checks are shared with ① and ②.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The segment table lists each column's Level and the segments between columns
(추천안, Q-K2), so a 2주형 shows 좌 경사 3, Level 1 9, Level 2 9, 기둥 사이 1 18,
우 경사 3. One column is unchanged.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Segments of C9 (좌 경사), C10 (Level), C11 (우 경사): first and last bar in
metres, spacing, count, and bar number. From the bar positions (코핑철근.md §3).
- Test: 0.300–4.550 (18 @250), 4.800–7.200 (9 @300), 7.450–11.700 (18 @250).
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
[보기] only switched the member tab. The alert now names its bar (RB-F08 → B2),
and [보기] switches to the member, highlights that row, and scrolls to it.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- 철근표 columns as in the 시안: 구분 · 번호 · 규격 · 간격 · 실간격 · 위치 · 방향 ·
형상 · 길이 · 개수 · 근거 · 비고. Metadata per bar from the rebar documents.
- 근거 badges: 입력 / 기본값 / 계산 / 가정 (the 가정 badge is italic amber).
- 번호 click highlights that row.
- 알림: [보기] opens the member tab; I02 [입력] focuses the fck input.
- Member tabs show the warning count.
- 공통 설정 moved to the right column (알림 → 검토 필요 → 공통 설정), as in the 시안.
- The 시안's "fck를 입력해야 생성" blocker is not used: the defaults are assumed
values (I02), as decided on 2026-10-22.
- Not in this step: the drawings and the 정면·단면 연동 (시안 도면 뷰어).
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Material {fck, fyH, fyS}, defaults 27 / 400 / 500 as assumed values (I02).
The rebar calculations take the material: the C7/C8 splice, the P2 development
length, the P3 lap, and the B2 split use it instead of fixed numbers.
- ③ screen: 공통 설정 inputs with a note that the defaults are assumed (I02).
- Project file stores the material as an optional field; older files open with
the defaults.
- Tests: fck 27 → 35 shortens the laps by √(27/35); the C7 piece follows fck;
a non-default fy drops I02; the file round trip.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The highlight is the 'current' class, but the stage switch only changed
aria-current, so ① stayed highlighted while ③ was shown. The switch now moves
the class with aria-current.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- The 번호·규격 and 비고 columns of the ③ table read left to right; the note
wraps instead of stretching the table.
- C14 note: "위 2줄 11본씩, 아래 5 · 6 · 3 · 2 (합 38)".
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Setting the project name programmatically does not fire 'input', so the apply
button stayed disabled after 샘플 P1 사용 even with P1 checked. The button is
now refreshed after the names are filled.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- The sample button and ?sample=1 fill the project name 운곡교P1 and the bridge
name 운곡교. The sample is RAG/운곡교P1입력.xlsx.
- Test: the app's copy stays byte-identical to the RAG file (skipped when the
RAG folder is absent) and reads one pier, P1, T형, 말뚝기초, 10 bearings.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Footing (확대기초철근 (1).md): grid counts from W and L, layer heights,
B1–B4 and B5–B8 counts and lengths (B2 13646, B6 11396), B10-1/B10-2,
B11 (60) and B12 (47) with their lengths. B9 is not computed yet.
- rebarSummary: one 철근표 per pier from the model (bearing, coping, column,
footing), with alerts: RB-F08 (B2 needs a splice, Q-B6), RB-F09 (B9 not
computed).
- ③ screen v1: stage nav button, member tabs (받침블럭 · 코핑 · 기둥 · 확대기초),
rebar table with 번호 · 규격 · 개수 · 길이 · 비고, alert list, and the open
questions (Q-B5, Q-B6, Q-C9). Drawings and the 강조 연동 are not in v1.
- Tests: footing values from the document; P1 summary totals; warnings.
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
