The right stack is gone. 색 기준 and the ⓘ origin note now sit under 시점 in the left stack, so every 3D info panel is on the
left. The stack is 180 px wide; the origin note opens to the right of its button.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
On wide screens the pier name moves to the 교각 목록 (name · type), the band is gone and the 3D view takes the full height.
A left stack holds 부재 표시 and then 시점; a right stack holds 색 기준 and then the ⓘ origin note. The active pier is scrolled
into view when it changes. Below 600 px the title is kept above the model and the stacks sit below it.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The title stays. The view buttons become a menu that shows the current view and closes on a choice, Esc or an outside
click. The origin note is an ⓘ toggle. 부재 표시 and 색 기준 are collapsed by default and show their state in the summary
(e.g. 부재 표시 7/7 ▾, 색 기준: 역할 ▾); their open state is remembered per viewer, with guarded storage access.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Between 601 and 1100 px the title stays on the left and the view buttons and origin note sit on the right. Wider windows
keep the current order; below 600 px the band wraps as before.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The title, view buttons and origin sit in one 44 px band on the model. 부재 표시 is a collapsible panel on the left and
색 기준 (③ only) a collapsible panel on the right, both over the canvas, about 170 px wide, with 44 px touch targets.
Below 600 px the band wraps and the panels fall below the model.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
On wide screens the page is one fixed-height frame: the left list, the centre (model band on top, table below) and the
right results each scroll on their own. The model band is 280–560 px (48vh) and the 3D view follows its container
through a ResizeObserver. The table header stays on top. Below 1100 px the panels stack with a 60vh height limit.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The status line and the backup banner share one row (the banner appears only when a backup exists). Results and notices
show as toasts that close after 4 s; problems stay until closed. The status line keeps only the empty-state hint.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The 철근재료표 moves from ③ to a new stage ④ in the header. It shows the checked piers (or the current one), one table
per pier with 강종 → 직경 → 번호 and subtotals, and a total across piers. The Excel export has one sheet per pier and a
합계 sheet. Print uses A4 landscape without the header and buttons. ③ keeps a summary line and a link to ④.
Spec §5, §6.9 and §7 record the stage (approved 2026-10-23).
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The 철근표 has a selection checkbox per row. Select-all / clear and 선택만 보기 sit above the table. In 선택만 보기 the other
bars are hidden in 3D and the members stay at 50% for context. A 3D click or an alert [보기] selects one bar; the
selection clears when the member tab or the pier changes. The selection is screen state and is not saved to the project.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The colour basis control sits in the 교각 3D 뷰 title row between the 시점 buttons and the origin note.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The colour basis control and legend sit below the 3D canvas and show only on ③, so they belong to the model window.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Role colours stay the default (spec §6.7). A control on ③ switches to diameter (nominal size, H and S of one size
share a colour, Okabe–Ito palette) or member (받침블럭 · 코핑 · 기둥 · 확대기초). The legend lists only the items
the model has. Highlighting and the state colours are unchanged. Approved 2026-10-23.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The model sits at the top of the centre column and the table or member card
below it, between the pier list on the left and the results on the right, as in
the ① screen and the 시안.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The 3D viewer (views, canvas, part toggles) moves into a slot at the top of ②
and ③ while those screens are shown, and back to ① otherwise. Moving the
element keeps the WebGL context; the viewer is measured after its screen is
visible.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The text columns were right-aligned and the table pushed the 비고 column out of
view. Text columns are now left-aligned, numbers (길이, 개수) right-aligned, and
the table scrolls sideways inside its panel.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- 철근표 columns as in the 시안: 구분 · 번호 · 규격 · 간격 · 실간격 · 위치 · 방향 ·
형상 · 길이 · 개수 · 근거 · 비고. Metadata per bar from the rebar documents.
- 근거 badges: 입력 / 기본값 / 계산 / 가정 (the 가정 badge is italic amber).
- 번호 click highlights that row.
- 알림: [보기] opens the member tab; I02 [입력] focuses the fck input.
- Member tabs show the warning count.
- 공통 설정 moved to the right column (알림 → 검토 필요 → 공통 설정), as in the 시안.
- The 시안's "fck를 입력해야 생성" blocker is not used: the defaults are assumed
values (I02), as decided on 2026-10-22.
- Not in this step: the drawings and the 정면·단면 연동 (시안 도면 뷰어).
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Material {fck, fyH, fyS}, defaults 27 / 400 / 500 as assumed values (I02).
The rebar calculations take the material: the C7/C8 splice, the P2 development
length, the P3 lap, and the B2 split use it instead of fixed numbers.
- ③ screen: 공통 설정 inputs with a note that the defaults are assumed (I02).
- Project file stores the material as an optional field; older files open with
the defaults.
- Tests: fck 27 → 35 shortens the laps by √(27/35); the C7 piece follows fck;
a non-default fy drops I02; the file round trip.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- The 번호·규격 and 비고 columns of the ③ table read left to right; the note
wraps instead of stretching the table.
- C14 note: "위 2줄 11본씩, 아래 5 · 6 · 3 · 2 (합 38)".
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- A 열 is one row across the footing width; each has its own count along the
length. Default floor((L − 1400) / 2250) + 1 per 열, as in spec §4.6.
- Counts are validated: one per 열, whole numbers 2–30. Spacing below the
2250 mm minimum is shown as a warning, not refused (the plan's 6본 → 5@1800
example).
- PierInput gains an optional pileRows; absent means the defaults, so existing
files and the P1 results are unchanged.
- Change tracking compares arrays by value; 열별 본수 can be reverted and
copied (copy item off by default).
- The footing card has −/+ per 열 with spacing, total, and the display string.
- Tests: defaults 4열 × 5본 = 20 and the 1단계 text; 6본 → 5@1800; limits;
model-level 21 piles.
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- C5: each member's options come from one table. Only the defaults (the 1단계
model) are selectable. The others show as disabled chips with 규칙 미정 (Q6).
The member summary is built from the defaults.
- C6: 전체 선택 acts only on visible, buildable piers; it reads 선택 해제 only
when all of those are checked. A check survives a change of the type filter.
The pier list scrolls past 300 px, for 20 piers.
- Tests: defaults are the only choices; unknown options refused; the 20-pier
mixed list with two failed piers; filter and check persistence.
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- ① and ② are switched from the stage nav. ② shows the pier list with change
counts, the five members (교량받침, 코핑, 기둥, 확대기초·말뚝, 지반·지층) with
a change count each, a member card, and a change list with per-item revert.
- The member card shows 기본 and 선택 summaries separately. Only members with
existing inputs get fields (코핑 폭·길이, 말뚝 길이); the others show values
and a note that their inputs come in a later step. Unselected members' inputs
are not shown.
- The field rows are shared between ① and ②.
- Added a global [hidden] rule so hidden screens stay hidden.
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- 속성 복사… opens the four-step dialog: source (current inputs), items,
targets (same-type filter on by default), and a preview with changed values
and skipped items per target. Apply changes only the visible, ticked targets.
- Items that the model does not have yet (기둥, 받침, 배근, 기초 형상) are shown
as 예정 and disabled. Coping length and pile length are off by default.
- Option: regenerate the targets right after applying (default on); otherwise
they show as 재생성 필요 through the normal change tracking.
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Header follows the mockup: dark bar, project line, stage chips (② shows the
pending change count), save status, 저장 / 엑셀 불러오기 / 프로젝트 열기 and
the primary 선택 교각 다시 생성 · 변경 n button.
- Left column: pier list with header row, 선택 n기 bulk bar, 입력값 and the
2단계 input card. The bottom input panel is gone.
- First save opens 시안 ⑤ (project name, bridge, client, author, 좌표계, memo);
later Ctrl+S / 저장 write the same file, as the spec's B5 requires.
- Project info (client, author, 좌표계, memo) is kept in the project file.
- Style layer uses the mockup's tokens (#18212B header, #1F5FA8 primary,
#D5DBE2 borders, #E3EDF8 selected row, JetBrains Mono for numbers).
- Not reflected: ② and ③ screens (not built yet), and the mockup's static
front preview (the app draws the model in 3D). Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Three values per pier: defaults (as imported), input (generated), draft
(current cards). Overrides = draft vs defaults; pending = draft vs input.
- Editable now: 코핑 폭, 코핑 길이, 말뚝 길이. Changing a card does not touch the
3D view until 다시 생성; the header and the card show 변경 n.
- Revert puts a field back to its imported default.
- Project files store defaults and draft (optional; v1 files still open).
- Tests: 코핑 폭 3100 → 3300 gives one override and one pending change;
regenerating clears pending but keeps the override; revert; file round trip.
- Not verified in a browser (no debuggable Chrome in this session).
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- main screen follows 시안 ①: header steps, pier list with type filter and
multi-select, viewer with 아이소/정면/측면/평면, part toggles in mockup order,
input panel and result sections
- import moved to a modal dialog following 시안 ④: project name (required),
file drop and pick, per-sheet recognition with selectable piers, preview of
pier and bearing tables, glossary of Excel column names
- Esc closes the dialog and focus stays inside it (native dialog)
- 44px touch targets and 2px focus rings; colours from the mockup tokens
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- parseWorkbook returns a report per sheet (table counts, issues, ok)
- sheets with E-level issues cannot be selected (spec section 2.3)
- pier input carries its source sheet name
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- three.js scene in the pier frame (pivot at first column centre)
- coping as extruded elevation outline; columns, footings, piles, blinding, bearing blocks and pads
- four view presets, per-part visibility toggles
- workbook load (sample or file), result table, issue list and undetermined defaults
- frame orientation test and bounding-box test
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
