The three 폐합 of one position were drawn at the same x, so their U bars overlapped. Loop i now sits at x + i·2d and its
삿갓 one bar (d) beside its U, so no U meets another loop's U or 삿갓. The 철근표 counts and lengths are unchanged.
The rule is geometry only; the spec (§4.3) needs the stacking note.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
fyH and fyS become a grade per prefix (D · H · S), chosen from SD300 · SD400 · SD500. The defaults are the P1 values, so
the P1 results do not change. Each bar takes its grade from its 규격 (fyOf). The 철근표 has a 강도 column. Older files
that stored fyH / fyS are read into the grade map. Only fck is still an assumed value (I02). Approved 2026-10-23.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Role colours stay the default (spec §6.7). A control on ③ switches to diameter (nominal size, H and S of one size
share a colour, Okabe–Ito palette) or member (받침블럭 · 코핑 · 기둥 · 확대기초). The legend lists only the items
the model has. Highlighting and the state colours are unchanged. Approved 2026-10-23.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Each member can take its own fck on its ② card. A member without one uses the ③ 공통 fck, and fy stays common.
The rebar table and the 3D model both read the resolved value. The I02 note stays until every fck member has its
own value. The project file stores the values as optional fckByMember and refuses a bad value on open.
Changing the fck is not a shape change, so it is not counted in the pending changes.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The stair bars in the 철근표 and the 3D model, and the 3D bottom and column bars, were built with the default fck,
so a changed fck did not reach them. buildRebar3D now takes the material, and a material change rebuilds the scene.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The segment table lists each column's Level and the segments between columns
(추천안, Q-K2), so a 2주형 shows 좌 경사 3, Level 1 9, Level 2 9, 기둥 사이 1 18,
우 경사 3. One column is unchanged.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Coping §9: C10 at each column centre (@300, k_max as for one column), C9 / C11
outside, and the gaps between columns filled @250 from both C10 groups with the
remaining length shared evenly (추천안, Q-K2). One column gives the T형 result.
- Column bars and couplers repeat per column (P1 230 × 2 for 2주형, × 3 for 3주형).
- Footings: each footing's bars are summed per name; the longest length governs.
- C14 is kept as the T형 layout with an RB-M01 note (per-column rule open, Q-K11).
- Tests: counts for 2주형 and 3주형; T형 unchanged; too-close columns refused.
- Not yet: the ③ shear-segment table for multi columns (still single column), the
C14 per column, and a drawing for multi columns. Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Segments of C9 (좌 경사), C10 (Level), C11 (우 경사): first and last bar in
metres, spacing, count, and bar number. From the bar positions (코핑철근.md §3).
- Test: 0.300–4.550 (18 @250), 4.800–7.200 (9 @300), 7.450–11.700 (18 @250).
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
[보기] only switched the member tab. The alert now names its bar (RB-F08 → B2),
and [보기] switches to the member, highlights that row, and scrolls to it.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- 철근표 columns as in the 시안: 구분 · 번호 · 규격 · 간격 · 실간격 · 위치 · 방향 ·
형상 · 길이 · 개수 · 근거 · 비고. Metadata per bar from the rebar documents.
- 근거 badges: 입력 / 기본값 / 계산 / 가정 (the 가정 badge is italic amber).
- 번호 click highlights that row.
- 알림: [보기] opens the member tab; I02 [입력] focuses the fck input.
- Member tabs show the warning count.
- 공통 설정 moved to the right column (알림 → 검토 필요 → 공통 설정), as in the 시안.
- The 시안's "fck를 입력해야 생성" blocker is not used: the defaults are assumed
values (I02), as decided on 2026-10-22.
- Not in this step: the drawings and the 정면·단면 연동 (시안 도면 뷰어).
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Material {fck, fyH, fyS}, defaults 27 / 400 / 500 as assumed values (I02).
The rebar calculations take the material: the C7/C8 splice, the P2 development
length, the P3 lap, and the B2 split use it instead of fixed numbers.
- ③ screen: 공통 설정 inputs with a note that the defaults are assumed (I02).
- Project file stores the material as an optional field; older files open with
the defaults.
- Tests: fck 27 → 35 shortens the laps by √(27/35); the C7 piece follows fck;
a non-default fy drops I02; the file round trip.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- A P4 is deleted when |z_P4 − z_bar| < (d_P4 + d_bar)/2 against B5 and B1
(the 확대기초 top layer, from the 상면). B11/B12 are not checked (Q-C9 무시).
- The P6 crossties start from the first kept P4.
- Tests: the document's example keeps all 8; B5 moved to −70 deletes the P4 at
−60; a P4 just outside the limit is kept.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- The 번호·규격 and 비고 columns of the ③ table read left to right; the note
wraps instead of stretching the table.
- C14 note: "위 2줄 11본씩, 아래 5 · 6 · 3 · 2 (합 38)".
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Leg offsets (B1 +25.4, B3 +22.25, B5 +28.6, B7 +23.85) and B11 / B12 heights
(550 / 950 / 1350; 569.1 / 969.1 / 1369.1).
- Reproduction counts: W 7800 → B4 30 / B2 29; L 9350 → B8 36 / B6 35.
- Variables: W 8000 with s 150 → 50 steps, e 150; W 12000 → 92 steps.
- Splice cases: L 8700 → B2 11946 (no splice), L 12400 → B4 12200,
W 8800 → B6 12046.
- Not covered: the 배근도 H 2200 case for B10 (the document's count is unclear).
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Recommended l_cap = h − 100 (top cover), so l_cap stays below h (RB-K04).
Cap length = 1740 + 2·l_cap. The shear rows show U and cap ranges.
- Piece count 6 per position (3 closed stirrups × U + cap): C9 + C10 + C11 gives
270 pieces, as in the document.
- P1/P2 per-line pieces are shown from the document (기둥철근.md §3.2).
- Tests: cap length and the 270 check.
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Coping: C9/C10 lower U = 1740 + 2h with h linear along the slope and 2300 on
the Level (3522 / 6098 / 6249 / 6340 from the document); C12 (3717–10183),
C13 11746, C14 3447.5, C15 3852, C16 4070.
- Column: P3 = C_t + 1.3·l_d(H19) lap (추천안 for Q-C6, lap 1146.6), P5 = C_t.
- Footing: B2 13646 is split into two pieces at a splice with 1.3·l_d(S25,
SD500) (추천안 for Q-B6), piece ≈ 7776 each.
- Not done: C9/C11 cap (삿갓) lengths (Q-K5 open), P1/P2 per-line pieces.
- Tests against the document values; P1 summary updated.
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- B9 (확대기초철근 (1).md §9): H16 with the 135° stirrup hook, on the odd grid
(i_W = 1, 5, …), 16 rows, 20 per row (even rows start at i_L 1, odd at 3),
320 bars, length l_v 1750 + 2 × 189 ≈ 2128.
- The rebar summary now lists B9; the alert about B9 is gone. Positions and
hooks are the document's proposed rules (Q-B18, Q-B19), noted on the row.
- Tests: the document's B9 values; P1 summary has 320 and only the splice alert.
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Footing (확대기초철근 (1).md): grid counts from W and L, layer heights,
B1–B4 and B5–B8 counts and lengths (B2 13646, B6 11396), B10-1/B10-2,
B11 (60) and B12 (47) with their lengths. B9 is not computed yet.
- rebarSummary: one 철근표 per pier from the model (bearing, coping, column,
footing), with alerts: RB-F08 (B2 needs a splice, Q-B6), RB-F09 (B9 not
computed).
- ③ screen v1: stage nav button, member tabs (받침블럭 · 코핑 · 기둥 · 확대기초),
rebar table with 번호 · 규격 · 개수 · 길이 · 비고, alert list, and the open
questions (Q-B5, Q-B6, Q-C9). Drawings and the 강조 연동 are not in v1.
- Tests: footing values from the document; P1 summary totals; warnings.
- Not verified in a browser.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Nominal bar diameters (H29 28.6, S32 31.8, …) as used by the documents. With
them, C7/C8 l_s = 1.3·l_d(28.6, fck 27) = 1717.6, which is the document's 1717.
- C1–C8 (코핑철근.md §5): width layout 127 · 110.5 · 21@125 · 110.5 · 127 with 24
bars (12 + 12); heights 43.284 / 43.227 / 43.170; top bar lengths 12744 /
12629.6 / 12515.2; bottom pieces ≈ 7448.
- C4 (기둥철근.md): P1 r 875 and P2 r 843.2; couplers P1 +3/6/9/12 m, P2 +150;
230 + 230 main pieces and 368 couplers; tie radius 900.45; P3 38 at @300 from
2.340; P5 19 at @120; P4 8 at @120 from −0.060; P6 8 levels × 4 = 32, length
≈ 2071.
- Not yet: C4 interference checks (P4 vs B11, Q-C9), bar lengths of P3/P5/P4
and coupler shapes, the coping/column drawing checks, and the ③ screen.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Drawing check (spec §6.3): an integrated 2500 × 1200 block gives 18@125 = 2250
along (ends 50 + 75) and 7@125 = 875 across (ends 162.5).
- C3 coping rebar, from RAG/코핑철근.md (2026-10-22 final):
- C10: 9 bars @300 at 4800–7200 (k_max 4, beyond the Level edge).
- C9 / C11: 18 bars each @250 outward, ends at 300 and 11700 (end gap 300).
- Refuses a coping too short for C9 (RB-K01).
- Side bars C12 5 rows / C13 2 rows at the 42.538 break; C14 38 bars;
C15 11 bars, C16 22 bars.
- spec §6.4 is older than 코핑철근.md (C10/C9/C11 layout, C12 row count, C14
dimensions). This follows the final document; spec §6.4 needs an update.
- Not yet: C1–C8 main bars (shape and lengths), the C12/C13 bar lengths and
shapes, the drawing check of the coping sheet, and the ③ screen.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- C1: development length l_d = 0.6·d_b·fy/(λ√fck), splice 1.3·l_d, standard
hooks (main 90°, tie 90°, stirrup 135° as written in the spec). fck 27 and
fy 400/500 are marked as assumed values (I02).
- C2: bearing-block bars, one block per bearing (배치 분리). Bars S1 and S2 at
@125 with 8 bars per 1200 mm side (7 gaps = 875, ends 162.5), 2500 mm long,
coping embedment from the block height (pad included, Q16 결정).
- Tests: development and splice lengths; hook table limits; embedment 600 /
550 / 619.1 / 569.1; P1 has 80 bars each of S1 and S2 over 10 blocks.
- Not yet: the ③ screen and the drawing check against the bearing-block drawing.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
