fix(rebar): side rows on the 250 grid up to the 400 mm top margin, not a fixed count of seven

C12 and C13 come from one grid from the Level underside + 127 at 250 mm, up to top − 400 mm (상면 여유). The fixed count of
seven rows is kept only for callers that give no top. P1 is unchanged (C12 5, C13 2); a taper of 3000 mm now gives C12 11
and C13 2, and the C13 first row is always the last C12 row plus 250.

Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>

src/core/coping-geom.ts

@@ -24,6 +24,11 @@ export const SIDE_COVER_M = 0.127;
  *   C13 rows lie in the end band (end underside … top, height h1).
  * zBreak = end underside + 127 is where the taper line starts at the end face (P1: 42.538).
  */
-export function sideRowLevels(levelBottom: number, endBottom: number): { zBottom: number; zBreak: number } {
-  return { zBottom: levelBottom + SIDE_COVER_M + 0.25, zBreak: endBottom + SIDE_COVER_M };
+export function sideRowLevels(levelBottom: number, endBottom: number, top?: number): { zBottom: number; zBreak: number; zTop?: number } {
+  // Top margin (상면 여유) at least 400 mm (코핑철근.md §6.1): the highest side row lies at or below top − 0.4.
+  return { zBottom: levelBottom + SIDE_COVER_M + 0.25, zBreak: endBottom + SIDE_COVER_M, zTop: top === undefined ? undefined : top - SIDE_TOP_MARGIN_M };
 }
+
+/** Pitch of the side-row grid (m), and the top margin 400 mm (상면 여유). */
+export const SIDE_PITCH_M = 0.25;
+export const SIDE_TOP_MARGIN_M = 0.4;

src/core/rebar/coping.ts

@@ -61,8 +61,13 @@ export function shearBars(coping: number, xc = coping / 2, g: CopingGeom = P1_CO
  * Side horizontal bars (코핑철근.md §6): seven rows from the bottom at 250 mm.
  * Rows below the sloped-bottom break (z_7,end) are C12, the rows at and above it are C13.
  */
-export function sideRows(zBottom: number, zBreak: number, rows = 7): { c12: number[]; c13: number[] } {
-  const z = Array.from({ length: rows }, (_, i) => Math.round((zBottom + i * COPING_REBAR.spacingSide / 1000) * 1000) / 1000);
+/**
+ * Side rows on the 250 grid from zBottom (코핑철근.md §6.1). With zTop the grid runs up to zTop (상면 여유 400 mm);
+ * without it the old seven rows are used. Rows below zBreak are C12 (taper band), the rest C13 (end band).
+ */
+export function sideRows(zBottom: number, zBreak: number, zTop?: number, rows = 7): { c12: number[]; c13: number[] } {
+  const count = zTop === undefined ? rows : Math.floor((zTop - zBottom + 1e-6) / (COPING_REBAR.spacingSide / 1000)) + 1;
+  const z = Array.from({ length: Math.max(0, count) }, (_, i) => Math.round((zBottom + i * COPING_REBAR.spacingSide / 1000) * 1000) / 1000);
   return { c12: z.filter((v) => v < zBreak - 1e-9), c13: z.filter((v) => v >= zBreak - 1e-9) };
 }
 
@@ -117,11 +122,11 @@ export interface SideBar {
  * C12 meets the sloped bottom at x_w = c + (z_break − z_k)·(x_L0 − c)/h2, with x_L0 = L/2 − W_L/2.
  * C13 starts at x_w = 127. Each row has two 일자 bars (side faces) and two ㄷ bars (one at each end).
  */
-export function copingSideBars(L: number, zBottom: number, zBreak: number, g: CopingGeom = P1_COPING_GEOM): { c12: SideBar[]; c13: SideBar[] } {
+export function copingSideBars(L: number, zBottom: number, zBreak: number, g: CopingGeom = P1_COPING_GEOM, zTop?: number): { c12: SideBar[]; c13: SideBar[] } {
   const c = COPING_REBAR.cover;
   const xL0 = L / 2 - g.levelWidth / 2;
   const bar = (z: number, xw: number): SideBar => ({ z, xw, straight: L - 2 * xw });
-  const rows = sideRows(zBottom, zBreak);
+  const rows = sideRows(zBottom, zBreak, zTop);
   return {
     c12: rows.c12.map((z) => bar(z, c + ((zBreak - z) * 1000 * (xL0 - c)) / g.h2)),
     c13: rows.c13.map((z) => bar(z, SIDE_C13_END)),

src/core/rebar/summary.ts

@@ -190,8 +190,8 @@ export function rebarSummary(
     warnings.push({ code: 'RB-M01', message: `다주형 ${nCol}기둥: C14는 T형 기준으로 두었습니다 (기둥마다 반복 규칙 미정, Q-K11).`, target: 'coping' });
   }
   // Per row: two 일자 (side faces) and two ㄷ (one at each end), so 4 bars per row (코핑철근.md §6.2).
-  const levels = sideRowLevels(model.levelBottom, model.endBottom);
-  const side = copingSideBars(model.copingL * 1000, levels.zBottom, levels.zBreak, model.copingGeom);
+  const levels = sideRowLevels(model.levelBottom, model.endBottom, model.copingRefTop);
+  const side = copingSideBars(model.copingL * 1000, levels.zBottom, levels.zBreak, model.copingGeom, levels.zTop);
   const hook = model.copingB * 1000 - 2 * 127 + 2 * SIDE_HOOK_LEG; // ㄷ body across the width + two legs
   const c12Range = side.c12.length ? `${Math.round(side.c12[0].straight)}–${Math.round(side.c12[side.c12.length - 1].straight)}` : '—';
   // Per bar: 2 일자 (straight) and 2 ㄷ (hook body + legs), so 4 bars per row position.

src/view/rebar3d.ts

@@ -204,8 +204,8 @@ export function buildRebar3D(m: PierModel, common: Material = DEFAULT_MATERIAL,
     // and two ㄷ bars: a body across the width at x_w, 25.4 above the row, with legs 1525 inward along the faces.
     const sideFace = B / 2 - 0.127;
     const dSide = NOMINAL_DIAMETER.H25;
-    const levels = sideRowLevels(m.levelBottom, m.endBottom);
-    const side = copingSideBars(L * 1000, levels.zBottom, levels.zBreak, m.copingGeom);
+    const levels = sideRowLevels(m.levelBottom, m.endBottom, m.copingRefTop);
+    const side = copingSideBars(L * 1000, levels.zBottom, levels.zBreak, m.copingGeom, levels.zTop);
     for (const [name, rows] of [['C12', side.c12], ['C13', side.c13]] as const) {
       for (const r of rows) {
         const xw = mm(r.xw);