chore(rebar): Pier_T_rebar 작업 폴더 초기 구성 및 외부 의존 파일 통합

- Code\rebar_pipeline, review_pipeline, pier-program을 정션에서 실제 폴더로 전환
- Code\rhino_mcp 및 CLAUDE_rhino배경.md 추가, .mcp.json은 PYTHONPATH로 새 위치 사용
- pier-program 내부 .git 제거(이력은 backup\pier-program_20261028.bundle에 보관)
- worktree 가이드 반영(CLAUDE.local.md, HANDOFF.md)
- D:\Rhino-MCP 경로 참조를 새 위치로 치환

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

Code/교각모델링앱/검증/web_test_data/운곡교P1/expected.json

@@ -0,0 +1,118 @@
+{
+ "_schema": "pier-T-expected/1",
+ "_note": "독립 기대값: 도면 치수 문자·표(D1~D3)에서 직접 옮긴 값. 생성용 params.json과 별도로 관리하며 검사기는 params를 읽지 않는다. 원출처: Code/교각모델링/verify_*.py (검증서 v0.1.05).",
+ "pier_id": "P1",
+ "tol_mm": 1.0,
+ "G1": {
+  "footing": {"dx": 9350, "dy": 7800, "z0": 26208, "thickness": 2200, "src": "D1 '9.350' '7.800' 'EL. 26.208' '2.200'"},
+  "lean": {"margin": 100, "thickness": 100, "src": "D1 footing +100 each side, 100 thick"},
+  "column": {"d": 2000, "height": 12003, "src": "D1 '2.000' '12.003'"},
+  "coping": {"dx": 12400, "dy": 3100, "z_top_left": 43411, "rise_upper": 1500, "rise_lower": 1500,
+             "z_top_right": 43698, "z_top_center": 43555, "flat_from_tip": 5100, "end_inset": 200, "radius": 12000,
+             "src": "D1 '12.400' '3.100' 'EL. 43.411' '1.500' x2 'EL. 43.698' 'EL. 43.555' '5.100' '200' 'R=12.000'"},
+  "coping_outline": [[-1100, 40411], [1100, 40411], [6200, 41911], [6000, 43698], [3715, 43698], [3715, 43627],
+                     [1210, 43627], [1210, 43555], [-1296, 43555], [-1296, 43483], [-3801, 43483], [-3801, 43411],
+                     [-6000, 43411], [-6200, 41911]],
+  "coping_outline_src": "D1 정면도 외형 (원호는 현으로 대체 후 활꼴 2개 차감)",
+  "dxf_arc_centres": {"datum_x": 12159.4, "datum_y": 16515.6, "datum_el": 40411,
+                      "left": [5207.5, 6039.2], "right": [19111.2, 6039.2],
+                      "src": "DXF ARC 1C4BF centre; datum CS-CNTL 1C546 / coping bottom line 1C4BD"},
+  "piles": {"nx": 6, "ny": 5, "pitch": 1550, "edge": 800, "d": 600, "length": 24400, "head_embedment": 100,
+            "src": "D1 '5@1.550' '4@1.550' '800' 'Ø600' 'L=24.4M'; 매입 100 (CS-CNTL)"},
+  "seats": {
+   "table": {"1": [43625, 164, 50, 700, 640], "2": [43697, 164, 50, 700, 640], "3": [43768, 164, 50, 700, 790],
+             "4": [43840, 164, 50, 700, 640], "5": [43912, 164, 50, 700, 640], "6": [43600, 139, 50, 700, 540],
+             "7": [43672, 139, 50, 700, 540], "8": [43744, 139, 50, 700, 650], "9": [43816, 139, 50, 700, 540],
+             "10": [43887, 139, 50, 700, 540]},
+   "table_columns": ["EL.'X'", "h1", "h2", "A", "B"],
+   "girders": 5,
+   "step_top": {"1": 43411, "2": 43483, "3": 43555, "4": 43627, "5": 43698},
+   "step_x": {"1": [-6000, -3801], "2": [-3801, -1296], "3": [-1296, 1210], "4": [1210, 3715], "5": [3715, 6000]},
+   "row_y": {"front": -698, "rear": 600},
+   "pitch_chain": [3, 7516],
+   "pedestal_plan": [1250, 1200],
+   "pad_margin": [200, 100],
+   "rear_first_from_tip": 1232,
+   "src": "D2 ELEVATION TABLE; D1 EL texts + drawn steps; D1 평면도 S1/S2 + D2 TABLE S1 (1550-852 / 1550-950); '3@2.505=7.516'; 대좌 2500x1200 반쪽; '1.232'"
+  }
+ },
+ "G2": {
+  "schedule_L": {"P1": 17247, "P2": 16553, "P3": 6436, "P4": 5636, "P5": 5636, "P6": 2136},
+  "schedule_n": {"P1": 46, "P2": 46, "P3": 36, "P4": 9, "P5": 22, "P6": 36},
+  "dia": {"P1": 32, "P2": 32, "P3": 19, "P4": 19, "P5": 19, "P6": 16},
+  "hoop_chain": {"start": [150, 1030], "groups": [[8, 120], [22, 120], [36, 300]]},
+  "hoop_marks_by_zone": [["P4", 9], ["P5", 22], ["P3", 36]],
+  "tie_chain": {"start": [150, 1030], "groups": [[8, 1800]]},
+  "tie_offset": 17.5,
+  "r_outer": 870.5, "r_inner": 825.5, "r_hoop": 897,
+  "main_divisions": 46,
+  "bottom_above_footing": 300,
+  "p1_top_parts": [300, 340, 16213],
+  "no_fillet_marks": ["P1", "P2", "P4", "P5"],
+  "src": "D3 L·수량; D1 '150','1.030','8@120=960','22@120=2.640','36@300=10.800','8@1.800=14.400'; HITL H2 반지름(단면 CAD)·D3 R"
+ },
+ "G3": {
+  "schedule": {"B1": [8000, 38], "B2": [11500, 38], "B3": [8000, 38], "B4": [7600, 35], "B5": [9550, 32],
+               "B6": [13050, 32], "B7": [9550, 32], "B8": [9150, 29], "B9": [2155, 493], "B10": [33684, 9],
+               "B11": [9350, 28], "B12": [7800, 34]},
+  "dia": {"B1": 25, "B2": 25, "B3": 19, "B4": 25, "B5": 29, "B6": 29, "B7": 19, "B8": 29, "B9": 16, "B10": 19,
+          "B11": 16, "B12": 16},
+  "layer_z": {"B2": 122, "B4": 122, "B6": 178, "B8": 178, "B3": 227.5, "B7": 277, "B1": 2073, "B5": 2127},
+  "rows": {"Y_BOT": {"ends": [-4575, 4575], "start": -4375, "pitch": 125, "n": 71},
+           "Y_250": {"ends": [-4575, 4575], "start": -4375, "pitch": 250, "n": 36},
+           "X_BOT": {"ends": [-3800, 3800], "start": -3625, "pitch": 125, "n": 59},
+           "X_250": {"ends": [-3800, 3800], "start": -3625, "pitch": 250, "n": 30}},
+  "b10_levels": {"start": 350, "pitch": 200, "n": 9},
+  "b10_size": [9198, 7644],
+  "b9_grid": {"x": {"start": -4125, "pitch": 250, "n": 34}, "y": {"start": -3500, "pitch": 250, "n": 29}},
+  "b9_erec": [150, 2100], "b9_a": 1995, "b9_c": 64,
+  "mid_levels": [550, 950, 1350, 1750],
+  "src": "D3 L·수량; D1/D2 '100','200','70@125=8.750' / '35@250' / '100','175','58@125=7.250' / '29@250'; F1 층 높이(작도점); '150','9@200=1.800'; '450','33@250=8.250' / '300','28@250=7.000'; EREC 150~2100; 중간층 작도점 [derived]"
+ },
+ "G4": {
+  "count": {"C1": 12, "C2": 12, "C3": 12, "C4": 12, "C5": 12, "C6": 12, "C7": 12, "C8": 12, "C9": 60, "C10": 21,
+            "C11": 60, "C12": 18, "C13": 9, "C14": 41, "C15": 13, "C16": 13, "S1": 50, "S2": 105},
+  "L": {"C1": 14490, "C2": 12081, "C3": 12106, "C4": 14490, "C5": 12081, "C6": 12106, "C7": 13994, "C8": 13994,
+        "C9": 8647, "C10": 10310, "C11": 8934, "C12": 20513, "C13": 29345, "C14": 3600, "C15": 2784, "C16": 5611,
+        "S1": 3800, "S2": 2500},
+  "range": {"C9": ["b_sched", 2956, 1376], "C11": ["b_sched", 2956, 1664], "C10": ["b_sched", 2998, 2998],
+            "C12": ["a_sched", 12228, 3151], "C13": ["a_sched", 12167, 12044]},
+  "range_convention": {"b_sched": {"a": 1407, "c": 750, "c_times": 2}, "a_sched": {"b": 1407, "c": 580, "c_times": 4}},
+  "dia": {"C1": 29, "C2": 29, "C3": 29, "C4": 29, "C5": 29, "C6": 29, "C7": 29, "C8": 29, "C9": 25, "C10": 25,
+          "C11": 25, "C12": 25, "C13": 25, "C14": 19, "C15": 19, "C16": 19, "S1": 19, "S2": 19},
+  "half_width": 1550,
+  "y24_chain": {"start": [100, 237], "pitch": 125, "n": 21, "end": 3000},
+  "y13_chain": {"start": [100, 237], "pitch": 250, "n": 10, "end": 3000},
+  "pairs": [["C1", "C4"], ["C2", "C5"], ["C3", "C6"], ["C7", "C8"]],
+  "tier_z": {"C1": 43311, "C4": 43311, "C2": 43211, "C5": 43211, "C3": 43111, "C6": 43111},
+  "stirrup_x": {"C10": [-900, -600, -300, 0, 300, 600, 900],
+                "C11": {"start": 1150, "pitch": 250, "n": 20}, "C9": {"start": -1150, "pitch": -250, "n": 20}},
+  "stirrups_per_x": 3,
+  "c10_bottom": 40511,
+  "loop_z": {"C12": {"start": 40761, "pitch": 250, "n": 6}, "C13": [42261, 42511, 42761]},
+  "c15_top": 43598.4, "c16_top": 43454.7,
+  "c14_levels": [[43088.5, 11], [43188.5, 11], [41011, 3], [42011, 5], [41511, 4], [42511, 6], [43442.4, 1]],
+  "s_per_girder": {"S1": [10, 50], "S2": [21, 100]},
+  "step_top": {"1": 43411, "2": 43483, "3": 43555, "4": 43627, "5": 43698},
+  "src": "D3 수량·L·a/b 범위; D1 A-A 사슬 '100','137','21@125','3000' / B-B '10@250'; 정면도 단 높이·스터럽 X·루프 EL; D2 '50','50'"
+ },
+ "G5": {
+  "el_x": {"1": 43625, "2": 43697, "3": 43768, "4": 43840, "5": 43912, "6": 43600, "7": 43672, "8": 43744, "9": 43816, "10": 43887},
+  "S": {"1": -1.910, "2": -1.907, "3": -1.905, "4": -1.903, "5": -1.901, "6": -1.910, "7": -1.907, "8": -1.905, "9": -1.903, "10": -1.901},
+  "W": {"1": 740, "2": 740, "3": 890, "4": 740, "5": 740, "6": 640, "7": 640, "8": 750, "9": 640, "10": 640},
+  "L": 800, "T": 30, "h3": 181,
+  "bearing_shrink": 100,
+  "colours": {"bearing": [0, 0, 0], "sole_plate": [150, 150, 150]},
+  "src": "D2 ELEVATION TABLE (EL.'X', h3), 솔플레이트 상세 TABLE (S, L, W, T); (L-100)x(W-100)·색 = 사용자 지시 2026-10-08"
+ },
+ "rebar_palette": {"32": [214, 39, 40], "29": [255, 127, 14], "25": [188, 60, 160], "19": [44, 160, 44], "16": [31, 119, 180]},
+ "rebar_palette_src": "디자인지침_경로.md R8 (2026-10-07)",
+ "planned_fail": [
+  {"gate": "G3", "item": "B12 bar count vs schedule", "reason": "작도 28본 채택(F2) vs D3 34본 — OPEN #9", "approved": "사용자 2026-10-07"},
+  {"gate": "G4", "item_prefix": "C9 original length vs L", "reason": "작도 폭 채택(K1)", "approved": "사용자 2026-10-07"},
+  {"gate": "G4", "item_prefix": "C10 original length vs L", "reason": "작도 폭 채택(K1)", "approved": "사용자 2026-10-07"},
+  {"gate": "G4", "item_prefix": "C11 original length vs L", "reason": "작도 폭 채택(K1)", "approved": "사용자 2026-10-07"},
+  {"gate": "G4", "item_prefix": "C12 original length vs L", "reason": "작도 폭 채택(C12·C13 drawn width)", "approved": "사용자 2026-10-07"},
+  {"gate": "G4", "item_prefix": "C13 original length vs L", "reason": "작도 폭 채택(C12·C13 drawn width)", "approved": "사용자 2026-10-07"}
+ ]
+}

Code/교각모델링앱/검증/web_test_data/테스트P1/confirm.json

@@ -0,0 +1,163 @@
+{
+ "expected:G1": {
+  "sha": "ebd00116a06211a5",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "g"
+ },
+ "expected:G2": {
+  "sha": "12df59aa062bde7a",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "g"
+ },
+ "expected:G3": {
+  "sha": "378eee3b312640dd",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "g"
+ },
+ "expected:G4": {
+  "sha": "9d14cf310e66f7cf",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "g"
+ },
+ "expected:G5": {
+  "sha": "4dd5a0aacc7137e4",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "g"
+ },
+ "expected:pier_id": {
+  "sha": "97086571f822df69",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "g"
+ },
+ "expected:planned_fail": {
+  "sha": "1c2024ffeca8d63f",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "x"
+ },
+ "expected:rebar_palette": {
+  "sha": "c41013bf3e985022",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "x"
+ },
+ "expected:tol_mm": {
+  "sha": "d0ff5974b6aa52cf",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "x"
+ },
+ "params:bearing_seats": {
+  "sha": "f212a2858946a702",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "g"
+ },
+ "params:column": {
+  "sha": "74c090c09f61aa42",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "n"
+ },
+ "params:column_rebar": {
+  "sha": "6e5cd384a1c43c80",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "n"
+ },
+ "params:coping": {
+  "sha": "9e3209026614e2d9",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "n"
+ },
+ "params:coping_rebar": {
+  "sha": "c98e1cc7779f604b",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "n"
+ },
+ "params:display": {
+  "sha": "b1b126034742709b",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "g"
+ },
+ "params:footing": {
+  "sha": "b7c5056daeed1f8b",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "n"
+ },
+ "params:footing_rebar": {
+  "sha": "3d11859aa672975b",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "n"
+ },
+ "params:lean_concrete": {
+  "sha": "8c9222a4b2112cbd",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "n"
+ },
+ "params:materials": {
+  "sha": "84f210201086bd7c",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "n"
+ },
+ "params:pier_id": {
+  "sha": "97086571f822df69",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "g"
+ },
+ "params:piles": {
+  "sha": "16b4cdea037fa977",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "n"
+ },
+ "params:rebar_marks": {
+  "sha": "c5d7818e0137ed86",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "g"
+ },
+ "params:sole_plates": {
+  "sha": "8cc6a2a1a125311c",
+  "by": "테스트",
+  "at": "2026-10-20 14:01:27",
+  "why": "시험",
+  "app_st": "g"
+ }
+}

Code/교각모델링앱/검증/web_test_data/테스트P1/drawings/audit.json

@@ -0,0 +1,26 @@
+[
+ {
+  "source": "C0050205-025-운곡교 교각도(1)(완도방향 P1).dwg",
+  "source_sha256": "d275fc3541eb2598c67563a366be893183f0a86063bf80fbad22bc4a41ad0694",
+  "dxf": "C0050205-025-운곡교 교각도(1)(완도방향 P1).dxf",
+  "dxf_sha256": "dfdf13ec2d006f20ec9d75f11cfb21177f7525c608b621fd50ce0f9dd04eaac5",
+  "engine": "ODA File Converter 27.1.0",
+  "label": "D1"
+ },
+ {
+  "source": "C0050205-026-운곡교 교각도(2)(완도방향 P1).dwg",
+  "source_sha256": "0aa03f2145935b1a2d91ac6f50ed8f37269ada03ec69c22fc8a94e6a3b0584e1",
+  "dxf": "C0050205-026-운곡교 교각도(2)(완도방향 P1).dxf",
+  "dxf_sha256": "3b85340056dab77de59e6a9f541f9a9083117409487eba1a199207b575c52993",
+  "engine": "ODA File Converter 27.1.0",
+  "label": "D2"
+ },
+ {
+  "source": "C0050205-027-운곡교 교각도(3)(완도방향 P1).dwg",
+  "source_sha256": "f77980c5f8592d50be0b22c72b626154af1f492884ad2803e310771643e442b5",
+  "dxf": "C0050205-027-운곡교 교각도(3)(완도방향 P1).dxf",
+  "dxf_sha256": "492735eb2ffc143ef918aed169fbda5f94f1fd4bcb11aadbcdb31eeb0d8ed391",
+  "engine": "ODA File Converter 27.1.0",
+  "label": "D3"
+ }
+]

Code/교각모델링앱/검증/web_test_data/테스트P1/drawings/texts.json

@@ -0,0 +1 @@
+[{"dwg": "D1", "layer": "CS-DIMT", "x": 43035.4, "y": 27654.4, "h": 150.0, "text": "137", "handle": "1BC7F"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 45797.9, "y": 27654.4, "h": 150.0, "text": "138", "handle": "1BC80"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 46137.4, "y": 27605.8, "h": 150.0, "text": "(1~3단)", "handle": "1BC81"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 43035.4, "y": 20658.1, "h": 150.0, "text": "137", "handle": "1BC82"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 45797.9, "y": 20658.1, "h": 150.0, "text": "138", "handle": "1BC83"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 44314.7, "y": 20268.1, "h": 150.0, "text": "3.100", "handle": "1BC84"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 42641.9, "y": 20868.1, "h": 150.0, "text": "100", "handle": "1BC85"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 43956.2, "y": 20868.1, "h": 150.0, "text": "21@125=2.625", "handle": "1BC86"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 46341.9, "y": 20868.1, "h": 150.0, "text": "100", "handle": "1BC87"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 44314.7, "y": 28464.4, "h": 150.0, "text": "3.100", "handle": "1BC88"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 42641.9, "y": 27864.4, "h": 150.0, "text": "100", "handle": "1BC89"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 43956.2, "y": 27864.4, "h": 150.0, "text": "21@125=2.625", "handle": "1BC8A"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 46341.9, "y": 27864.4, "h": 150.0, "text": "100", "handle": "1BC8B"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 42641.9, "y": 21468.1, "h": 150.0, "text": "100", "handle": "1BC8C"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 43256.9, "y": 21468.1, "h": 150.0, "text": "580", "handle": "1BC8D"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 43836.9, "y": 21468.1, "h": 150.0, "text": "580", "handle": "1BC8E"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 44416.9, "y": 21468.1, "h": 150.0, "text": "580", "handle": "1BC8F"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 44996.9, "y": 21468.1, "h": 150.0, "text": "580", "handle": "1BC90"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 45576.9, "y": 21468.1, "h": 150.0, "text": "580", "handle": "1BC91"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 46266.9, "y": 21468.1, "h": 150.0, "text": "100", "handle": "1BC92"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 44479.7, "y": 7438.8, "h": 150.0, "text": "3.100", "handle": "1BC93"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 42807.0, "y": 8038.8, "h": 150.0, "text": "100", "handle": "1BC94"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 44121.3, "y": 8038.8, "h": 150.0, "text": "21@125=2.625", "handle": "1BC95"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 46507.0, "y": 8038.8, "h": 150.0, "text": "100", "handle": "1BC96"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 44479.7, "y": 17682.6, "h": 150.0, "text": "3.100", "handle": "1BC97"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 46582.0, "y": 17082.6, "h": 150.0, "text": "100", "handle": "1BC98"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 44058.8, "y": 17082.6, "h": 150.0, "text": "10@250=2.500", "handle": "1BC99"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 42807.0, "y": 17082.6, "h": 150.0, "text": "100", "handle": "1BC9A"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 42807.0, "y": 16482.6, "h": 150.0, "text": "100", "handle": "1BC9B"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 44121.3, "y": 16482.6, "h": 150.0, "text": "21@125=2.625", "handle": "1BC9C"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 46507.0, "y": 16482.6, "h": 150.0, "text": "100", "handle": "1BC9D"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 42807.0, "y": 8638.8, "h": 150.0, "text": "100", "handle": "1BC9E"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 43422.0, "y": 8638.8, "h": 150.0, "text": "580", "handle": "1BC9F"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 44002.0, "y": 8638.8, "h": 150.0, "text": "580", "handle": "1BCA0"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 44582.0, "y": 8638.8, "h": 150.0, "text": "580", "handle": "1BCA1"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 45162.0, "y": 8638.8, "h": 150.0, "text": "580", "handle": "1BCA2"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 45742.0, "y": 8638.8, "h": 150.0, "text": "580", "handle": "1BCA3"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 46432.0, "y": 8638.8, "h": 150.0, "text": "100", "handle": "1BCA4"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 40260.3, "y": 10101.8, "h": 150.0, "text": "100", "handle": "1BCA5"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 40260.3, "y": 11142.7, "h": 150.0, "text": "9@250=2.250", "handle": "1BCA6"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 40260.3, "y": 13017.5, "h": 150.0, "text": "694", "handle": "1BCA7"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 40260.3, "y": 13770.8, "h": 150.0, "text": "100", "handle": "1BCA8"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 39660.3, "y": 11790.2, "h": 150.0, "text": "3.144", "handle": "1BCA9"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 43200.5, "y": 16272.6, "h": 150.0, "text": "137", "handle": "1BCAA"}, {"dwg": "D1", "layer": "CS-DIMT", "x": 45963.0, "y": 16272.6, "h": 150.0, "text": "138", "handle": "1BCAB"}, {"dwg": "D1", "layer": "CS-DIMT", "xLine truncated

Code/교각모델링앱/검증/web_test_data/테스트P1/expected.json

@@ -0,0 +1,840 @@
+{
+ "_schema": "pier-T-expected/1",
+ "_note": "독립 기대값: 도면 치수 문자·표(D1~D3)에서 직접 옮긴 값. 생성용 params.json과 별도로 관리하며 검사기는 params를 읽지 않는다. 원출처: Code/교각모델링/verify_*.py (검증서 v0.1.05).",
+ "pier_id": "P1",
+ "tol_mm": 1.0,
+ "G1": {
+  "footing": {
+   "dx": 9350,
+   "dy": 7800,
+   "z0": 26208,
+   "thickness": 2200,
+   "src": "D1 '9.350' '7.800' 'EL. 26.208' '2.200'"
+  },
+  "lean": {
+   "margin": 100,
+   "thickness": 100,
+   "src": "D1 footing +100 each side, 100 thick"
+  },
+  "column": {
+   "d": 2000,
+   "height": 12003,
+   "src": "D1 '2.000' '12.003'"
+  },
+  "coping": {
+   "dx": 12400,
+   "dy": 3100,
+   "z_top_left": 43411,
+   "rise_upper": 1500,
+   "rise_lower": 1500,
+   "z_top_right": 43698,
+   "z_top_center": 43555,
+   "flat_from_tip": 5100,
+   "end_inset": 200,
+   "radius": 12000,
+   "src": "D1 '12.400' '3.100' 'EL. 43.411' '1.500' x2 'EL. 43.698' 'EL. 43.555' '5.100' '200' 'R=12.000'"
+  },
+  "coping_outline": [
+   [
+    -1100,
+    40411
+   ],
+   [
+    1100,
+    40411
+   ],
+   [
+    6200,
+    41911
+   ],
+   [
+    6000,
+    43698
+   ],
+   [
+    3715,
+    43698
+   ],
+   [
+    3715,
+    43627
+   ],
+   [
+    1210,
+    43627
+   ],
+   [
+    1210,
+    43555
+   ],
+   [
+    -1296,
+    43555
+   ],
+   [
+    -1296,
+    43483
+   ],
+   [
+    -3801,
+    43483
+   ],
+   [
+    -3801,
+    43411
+   ],
+   [
+    -6000,
+    43411
+   ],
+   [
+    -6200,
+    41911
+   ]
+  ],
+  "coping_outline_src": "D1 정면도 외형 (원호는 현으로 대체 후 활꼴 2개 차감)",
+  "dxf_arc_centres": {
+   "datum_x": 12159.4,
+   "datum_y": 16515.6,
+   "datum_el": 40411,
+   "left": [
+    5207.5,
+    6039.2
+   ],
+   "right": [
+    19111.2,
+    6039.2
+   ],
+   "src": "DXF ARC 1C4BF centre; datum CS-CNTL 1C546 / coping bottom line 1C4BD"
+  },
+  "piles": {
+   "nx": 6,
+   "ny": 5,
+   "pitch": 1550,
+   "edge": 800,
+   "d": 600,
+   "length": 24400,
+   "head_embedment": 100,
+   "src": "D1 '5@1.550' '4@1.550' '800' 'Ø600' 'L=24.4M'; 매입 100 (CS-CNTL)"
+  },
+  "seats": {
+   "table": {
+    "1": [
+     43625,
+     164,
+     50,
+     700,
+     640
+    ],
+    "2": [
+     43697,
+     164,
+     50,
+     700,
+     640
+    ],
+    "3": [
+     43768,
+     164,
+     50,
+     700,
+     790
+    ],
+    "4": [
+     43840,
+     164,
+     50,
+     700,
+     640
+    ],
+    "5": [
+     43912,
+     164,
+     50,
+     700,
+     640
+    ],
+    "6": [
+     43600,
+     139,
+     50,
+     700,
+     540
+    ],
+    "7": [
+     43672,
+     139,
+     50,
+     700,
+     540
+    ],
+    "8": [
+     43744,
+     139,
+     50,
+     700,
+     650
+    ],
+    "9": [
+     43816,
+     139,
+     50,
+     700,
+     540
+    ],
+    "10": [
+     43887,
+     139,
+     50,
+     700,
+     540
+    ]
+   },
+   "table_columns": [
+    "EL.'X'",
+    "h1",
+    "h2",
+    "A",
+    "B"
+   ],
+   "girders": 5,
+   "step_top": {
+    "1": 43411,
+    "2": 43483,
+    "3": 43555,
+    "4": 43627,
+    "5": 43698
+   },
+   "step_x": {
+    "1": [
+     -6000,
+     -3801
+    ],
+    "2": [
+     -3801,
+     -1296
+    ],
+    "3": [
+     -1296,
+     1210
+    ],
+    "4": [
+     1210,
+     3715
+    ],
+    "5": [
+     3715,
+     6000
+    ]
+   },
+   "row_y": {
+    "front": -698,
+    "rear": 600
+   },
+   "pitch_chain": [
+    3,
+    7516
+   ],
+   "pedestal_plan": [
+    1250,
+    1200
+   ],
+   "pad_margin": [
+    200,
+    100
+   ],
+   "rear_first_from_tip": 1232,
+   "src": "D2 ELEVATION TABLE; D1 EL texts + drawn steps; D1 평면도 S1/S2 + D2 TABLE S1 (1550-852 / 1550-950); '3@2.505=7.516'; 대좌 2500x1200 반쪽; '1.232'"
+  }
+ },
+ "G2": {
+  "schedule_L": {
+   "P1": 17247,
+   "P2": 16553,
+   "P3": 6436,
+   "P4": 5636,
+   "P5": 5636,
+   "P6": 2136
+  },
+  "schedule_n": {
+   "P1": 46,
+   "P2": 46,
+   "P3": 36,
+   "P4": 9,
+   "P5": 22,
+   "P6": 36
+  },
+  "dia": {
+   "P1": 32,
+   "P2": 32,
+   "P3": 19,
+   "P4": 19,
+   "P5": 19,
+   "P6": 16
+  },
+  "hoop_chain": {
+   "start": [
+    150,
+    1030
+   ],
+   "groups": [
+    [
+     8,
+     120
+    ],
+    [
+     22,
+     120
+    ],
+    [
+     36,
+     300
+    ]
+   ]
+  },
+  "hoop_marks_by_zone": [
+   [
+    "P4",
+    9
+   ],
+   [
+    "P5",
+    22
+   ],
+   [
+    "P3",
+    36
+   ]
+  ],
+  "tie_chain": {
+   "start": [
+    150,
+    1030
+   ],
+   "groups": [
+    [
+     8,
+     1800
+    ]
+   ]
+  },
+  "tie_offset": 17.5,
+  "r_outer": 870.5,
+  "r_inner": 825.5,
+  "r_hoop": 897,
+  "main_divisions": 46,
+  "bottom_above_footing": 300,
+  "p1_top_parts": [
+   300,
+   340,
+   16213
+  ],
+  "no_fillet_marks": [
+   "P1",
+   "P2",
+   "P4",
+   "P5"
+  ],
+  "src": "D3 L·수량; D1 '150','1.030','8@120=960','22@120=2.640','36@300=10.800','8@1.800=14.400'; HITL H2 반지름(단면 CAD)·D3 R"
+ },
+ "G3": {
+  "schedule": {
+   "B1": [
+    8000,
+    38
+   ],
+   "B2": [
+    11500,
+    38
+   ],
+   "B3": [
+    8000,
+    38
+   ],
+   "B4": [
+    7600,
+    35
+   ],
+   "B5": [
+    9550,
+    32
+   ],
+   "B6": [
+    13050,
+    32
+   ],
+   "B7": [
+    9550,
+    32
+   ],
+   "B8": [
+    9150,
+    29
+   ],
+   "B9": [
+    2155,
+    493
+   ],
+   "B10": [
+    33684,
+    9
+   ],
+   "B11": [
+    9350,
+    28
+   ],
+   "B12": [
+    7800,
+    34
+   ]
+  },
+  "dia": {
+   "B1": 25,
+   "B2": 25,
+   "B3": 19,
+   "B4": 25,
+   "B5": 29,
+   "B6": 29,
+   "B7": 19,
+   "B8": 29,
+   "B9": 16,
+   "B10": 19,
+   "B11": 16,
+   "B12": 16
+  },
+  "layer_z": {
+   "B2": 122,
+   "B4": 122,
+   "B6": 178,
+   "B8": 178,
+   "B3": 227.5,
+   "B7": 277,
+   "B1": 2073,
+   "B5": 2127
+  },
+  "rows": {
+   "Y_BOT": {
+    "ends": [
+     -4575,
+     4575
+    ],
+    "start": -4375,
+    "pitch": 125,
+    "n": 71
+   },
+   "Y_250": {
+    "ends": [
+     -4575,
+     4575
+    ],
+    "start": -4375,
+    "pitch": 250,
+    "n": 36
+   },
+   "X_BOT": {
+    "ends": [
+     -3800,
+     3800
+    ],
+    "start": -3625,
+    "pitch": 125,
+    "n": 59
+   },
+   "X_250": {
+    "ends": [
+     -3800,
+     3800
+    ],
+    "start": -3625,
+    "pitch": 250,
+    "n": 30
+   }
+  },
+  "b10_levels": {
+   "start": 350,
+   "pitch": 200,
+   "n": 9
+  },
+  "b10_size": [
+   9198,
+   7644
+  ],
+  "b9_grid": {
+   "x": {
+    "start": -4125,
+    "pitch": 250,
+    "n": 34
+   },
+   "y": {
+    "start": -3500,
+    "pitch": 250,
+    "n": 29
+   }
+  },
+  "b9_erec": [
+   150,
+   2100
+  ],
+  "b9_a": 1995,
+  "b9_c": 64,
+  "mid_levels": [
+   550,
+   950,
+   1350,
+   1750
+  ],
+  "src": "D3 L·수량; D1/D2 '100','200','70@125=8.750' / '35@250' / '100','175','58@125=7.250' / '29@250'; F1 층 높이(작도점); '150','9@200=1.800'; '450','33@250=8.250' / '300','28@250=7.000'; EREC 150~2100; 중간층 작도점 [derived]"
+ },
+ "G4": {
+  "count": {
+   "C1": 12,
+   "C2": 12,
+   "C3": 12,
+   "C4": 12,
+   "C5": 12,
+   "C6": 12,
+   "C7": 12,
+   "C8": 12,
+   "C9": 60,
+   "C10": 21,
+   "C11": 60,
+   "C12": 18,
+   "C13": 9,
+   "C14": 41,
+   "C15": 13,
+   "C16": 13,
+   "S1": 50,
+   "S2": 105
+  },
+  "L": {
+   "C1": 14490,
+   "C2": 12081,
+   "C3": 12106,
+   "C4": 14490,
+   "C5": 12081,
+   "C6": 12106,
+   "C7": 13994,
+   "C8": 13994,
+   "C9": 8647,
+   "C10": 10310,
+   "C11": 8934,
+   "C12": 20513,
+   "C13": 29345,
+   "C14": 3600,
+   "C15": 2784,
+   "C16": 5611,
+   "S1": 3800,
+   "S2": 2500
+  },
+  "range": {
+   "C9": [
+    "b_sched",
+    2956,
+    1376
+   ],
+   "C11": [
+    "b_sched",
+    2956,
+    1664
+   ],
+   "C10": [
+    "b_sched",
+    2998,
+    2998
+   ],
+   "C12": [
+    "a_sched",
+    12228,
+    3151
+   ],
+   "C13": [
+    "a_sched",
+    12167,
+    12044
+   ]
+  },
+  "range_convention": {
+   "b_sched": {
+    "a": 1407,
+    "c": 750,
+    "c_times": 2
+   },
+   "a_sched": {
+    "b": 1407,
+    "c": 580,
+    "c_times": 4
+   }
+  },
+  "dia": {
+   "C1": 29,
+   "C2": 29,
+   "C3": 29,
+   "C4": 29,
+   "C5": 29,
+   "C6": 29,
+   "C7": 29,
+   "C8": 29,
+   "C9": 25,
+   "C10": 25,
+   "C11": 25,
+   "C12": 25,
+   "C13": 25,
+   "C14": 19,
+   "C15": 19,
+   "C16": 19,
+   "S1": 19,
+   "S2": 19
+  },
+  "half_width": 1550,
+  "y24_chain": {
+   "start": [
+    100,
+    237
+   ],
+   "pitch": 125,
+   "n": 21,
+   "end": 3000
+  },
+  "y13_chain": {
+   "start": [
+    100,
+    237
+   ],
+   "pitch": 250,
+   "n": 10,
+   "end": 3000
+  },
+  "pairs": [
+   [
+    "C1",
+    "C4"
+   ],
+   [
+    "C2",
+    "C5"
+   ],
+   [
+    "C3",
+    "C6"
+   ],
+   [
+    "C7",
+    "C8"
+   ]
+  ],
+  "tier_z": {
+   "C1": 43311,
+   "C4": 43311,
+   "C2": 43211,
+   "C5": 43211,
+   "C3": 43111,
+   "C6": 43111
+  },
+  "stirrup_x": {
+   "C10": [
+    -900,
+    -600,
+    -300,
+    0,
+    300,
+    600,
+    900
+   ],
+   "C11": {
+    "start": 1150,
+    "pitch": 250,
+    "n": 20
+   },
+   "C9": {
+    "start": -1150,
+    "pitch": -250,
+    "n": 20
+   }
+  },
+  "stirrups_per_x": 3,
+  "c10_bottom": 40511,
+  "loop_z": {
+   "C12": {
+    "start": 40761,
+    "pitch": 250,
+    "n": 6
+   },
+   "C13": [
+    42261,
+    42511,
+    42761
+   ]
+  },
+  "c15_top": 43598.4,
+  "c16_top": 43454.7,
+  "c14_levels": [
+   [
+    43088.5,
+    11
+   ],
+   [
+    43188.5,
+    11
+   ],
+   [
+    41011,
+    3
+   ],
+   [
+    42011,
+    5
+   ],
+   [
+    41511,
+    4
+   ],
+   [
+    42511,
+    6
+   ],
+   [
+    43442.4,
+    1
+   ]
+  ],
+  "s_per_girder": {
+   "S1": [
+    10,
+    50
+   ],
+   "S2": [
+    21,
+    100
+   ]
+  },
+  "step_top": {
+   "1": 43411,
+   "2": 43483,
+   "3": 43555,
+   "4": 43627,
+   "5": 43698
+  },
+  "src": "D3 수량·L·a/b 범위; D1 A-A 사슬 '100','137','21@125','3000' / B-B '10@250'; 정면도 단 높이·스터럽 X·루프 EL; D2 '50','50'"
+ },
+ "G5": {
+  "el_x": {
+   "1": 43625,
+   "2": 43697,
+   "3": 43768,
+   "4": 43840,
+   "5": 43912,
+   "6": 43600,
+   "7": 43672,
+   "8": 43744,
+   "9": 43816,
+   "10": 43887
+  },
+  "S": {
+   "1": -1.91,
+   "2": -1.907,
+   "3": -1.905,
+   "4": -1.903,
+   "5": -1.901,
+   "6": -1.91,
+   "7": -1.907,
+   "8": -1.905,
+   "9": -1.903,
+   "10": -1.901
+  },
+  "W": {
+   "1": 740,
+   "2": 740,
+   "3": 890,
+   "4": 740,
+   "5": 740,
+   "6": 640,
+   "7": 640,
+   "8": 750,
+   "9": 640,
+   "10": 640
+  },
+  "L": 800,
+  "T": 30,
+  "h3": 181,
+  "bearing_shrink": 100,
+  "colours": {
+   "bearing": [
+    0,
+    0,
+    0
+   ],
+   "sole_plate": [
+    150,
+    150,
+    150
+   ]
+  },
+  "src": "D2 ELEVATION TABLE (EL.'X', h3), 솔플레이트 상세 TABLE (S, L, W, T); (L-100)x(W-100)·색 = 사용자 지시 2026-10-08"
+ },
+ "rebar_palette": {
+  "32": [
+   214,
+   39,
+   40
+  ],
+  "29": [
+   255,
+   127,
+   14
+  ],
+  "25": [
+   188,
+   60,
+   160
+  ],
+  "19": [
+   44,
+   160,
+   44
+  ],
+  "16": [
+   31,
+   119,
+   180
+  ]
+ },
+ "rebar_palette_src": "디자인지침_경로.md R8 (2026-10-07)",
+ "planned_fail": [
+  {
+   "gate": "G3",
+   "item": "B12 bar count vs schedule",
+   "reason": "작도 28본 채택(F2) vs D3 34본 — OPEN #9",
+   "approved": "사용자 2026-10-07"
+  },
+  {
+   "gate": "G4",
+   "item_prefix": "C9 original length vs L",
+   "reason": "작도 폭 채택(K1)",
+   "approved": "사용자 2026-10-07"
+  },
+  {
+   "gate": "G4",
+   "item_prefix": "C10 original length vs L",
+   "reason": "작도 폭 채택(K1)",
+   "approved": "사용자 2026-10-07"
+  },
+  {
+   "gate": "G4",
+   "item_prefix": "C11 original length vs L",
+   "reason": "작도 폭 채택(K1)",
+   "approved": "사용자 2026-10-07"
+  },
+  {
+   "gate": "G4",
+   "item_prefix": "C12 original length vs L",
+   "reason": "작도 폭 채택(C12·C13 drawn width)",
+   "approved": "사용자 2026-10-07"
+  },
+  {
+   "gate": "G4",
+   "item_prefix": "C13 original length vs L",
+   "reason": "작도 폭 채택(C12·C13 drawn width)",
+   "approved": "사용자 2026-10-07"
+  }
+ ]
+}

Code/교각모델링앱/검증/web_test_data/테스트P1/pier.json

@@ -0,0 +1,109 @@
+{
+ "name": "테스트P1",
+ "type": "T형",
+ "created": "2026-10-20 14:01:22",
+ "template": "운곡교P1",
+ "origin": {
+  "label": "운곡교P1",
+  "at": "2026-10-20 14:01:22",
+  "sha": {
+   "params:_meta": "68466a4e497800d6",
+   "params:lean_concrete": "8c9222a4b2112cbd",
+   "params:footing": "b7c5056daeed1f8b",
+   "params:column": "74c090c09f61aa42",
+   "params:coping": "9e3209026614e2d9",
+   "params:piles": "16b4cdea037fa977",
+   "params:hitl_decisions_2026_10_07": "1a6acbe25bc01948",
+   "params:bearing_seats": "f212a2858946a702",
+   "params:column_rebar": "6e5cd384a1c43c80",
+   "params:footing_rebar": "3d11859aa672975b",
+   "params:coping_rebar": "c98e1cc7779f604b",
+   "params:sole_plates": "8cc6a2a1a125311c",
+   "params:_schema": "78a2cba5e3555141",
+   "params:pier_id": "97086571f822df69",
+   "params:rebar_marks": "c5d7818e0137ed86",
+   "params:rebar_marks_src": "a7a01d0421958fc4",
+   "params:materials": "84f210201086bd7c",
+   "params:display": "b1b126034742709b",
+   "expected:_schema": "21dc6d01b07f7ac8",
+   "expected:_note": "624c308bbfcdf519",
+   "expected:pier_id": "97086571f822df69",
+   "expected:tol_mm": "d0ff5974b6aa52cf",
+   "expected:G1": "ebd00116a06211a5",
+   "expected:G2": "12df59aa062bde7a",
+   "expected:G3": "378eee3b312640dd",
+   "expected:G4": "9d14cf310e66f7cf",
+   "expected:G5": "4dd5a0aacc7137e4",
+   "expected:rebar_palette": "c41013bf3e985022",
+   "expected:rebar_palette_src": "249b3cde71fb0eb8",
+   "expected:planned_fail": "1c2024ffeca8d63f"
+  },
+  "fixed": {
+   "params:column": {
+    "shape": "\"circular\""
+   },
+   "params:coping": {
+    "form": "null"
+   },
+   "params:piles": {
+    "kind": "\"composite pile\""
+   },
+   "params:bearing_seats": {
+    "pedestal": "null",
+    "pedestals": "null"
+   },
+   "params:column_rebar": {
+    "form": "null"
+   },
+   "params:footing_rebar": {
+    "form": "null"
+   },
+   "params:coping_rebar": {
+    "form": "null",
+    "host": "null",
+    "group": "null"
+   },
+   "params:sole_plates": {
+    "bearing_size": "null"
+   },
+   "params:rebar_marks": {
+    "P1.shape": "\"XIV\"",
+    "P2.shape": "\"XVI\"",
+    "P3.shape": "\"VI\"",
+    "P4.shape": "\"V\"",
+    "P5.shape": "\"IX\"",
+    "P6.shape": "\"III\"",
+    "B1.shape": "\"III\"",
+    "B2.shape": "\"XII\"",
+    "B3.shape": "\"III\"",
+    "B4.shape": "\"I\"",
+    "B5.shape": "\"XII\"",
+    "B6.shape": "\"XII\"",
+    "B7.shape": "\"XII\"",
+    "B8.shape": "\"XVI\"",
+    "B9.shape": "\"XI\"",
+    "B10.shape": "\"XIII\"",
+    "B11.shape": "\"XII\"",
+    "B12.shape": "\"III\"",
+    "C1.shape": "\"VIII\"",
+    "C2.shape": "\"VIII\"",
+    "C3.shape": "\"VIII\"",
+    "C4.shape": "\"VIII\"",
+    "C5.shape": "\"VIII\"",
+    "C6.shape": "\"VIII\"",
+    "C7.shape": "\"VII\"",
+    "C8.shape": "\"VII\"",
+    "C9.shape": "\"IV\"",
+    "C10.shape": "\"IV\"",
+    "C11.shape": "\"IV\"",
+    "C12.shape": "\"X\"",
+    "C13.shape": "\"X\"",
+    "C14.shape": "\"III\"",
+    "C15.shape": "\"III\"",
+    "C16.shape": "\"II\"",
+    "S1.shape": "\"III\"",
+    "S2.shape": "\"III\""
+   }
+  }
+ }
+}

Code/교각모델링앱/검증/web_test_data/테스트P1/runs/current/G1_fp.json

@@ -0,0 +1 @@
+{"model": "C:\\Users\\User\\Desktop\\바이브코딩\\pier_T\\Code\\교각모델링앱\\검증\\web_test_data\\테스트P1\\runs\\current\\G1.3dm", "units": "Millimeters", "tolerance": 0.001, "count": 54, "layers": {"P1::받침패드": [90, 160, 90, true], "P1::받침대좌": [190, 90, 90, true], "P1::말뚝": [110, 110, 110, true], "P1::코핑": [210, 180, 80, true], "P1::기둥": [200, 140, 90, true], "P1::기초": [120, 150, 200, true], "P1::버림콘크리트": [160, 160, 160, true]}, "objects": {"P1-BP10": {"layer": "P1::받침패드", "type": "Brep", "hidden": false, "locked": false, "colour_source": 0, "colour": [0, 0, 0], "bbox": [4659.59, 130.44, 43837.0, 5447.21, 1069.16, 43887.0], "user": {"fck": "-", "id": "P1-BP10", "role": "bearing pad h2 NO.10 2800 kN 양방향", "source_views": "D1 평면도, D1 단면도, D2 교량받침 상세·ELEVATION TABLE"}, "faces": 6, "solid": true, "volume": 29366666.7}, "P1-BS10": {"layer": "P1::받침대좌", "type": "Brep", "hidden": false, "locked": false, "colour_source": 0, "colour": [0, 0, 0], "bbox": [4420.0, -95.8, 43698.0, 5712.5, 1242.6, 43837.0], "user": {"fck": "40MPa", "id": "P1-BS10", "role": "bearing pedestal h1 NO.10 girder 5 rear", "source_views": "D1 평면도, D1 단면도, D2 ELEVATION TABLE"}, "faces": 6, "solid": true, "volume": 208505497.5}, "P1-BP09": {"layer": "P1::받침패드", "type": "Brep", "hidden": false, "locked": false, "colour_source": 0, "colour": [0, 0, 0], "bbox": [2154.29, 130.44, 43766.0, 2941.91, 1069.16, 43816.0], "user": {"fck": "-", "id": "P1-BP09", "role": "bearing pad h2 NO.9 2800 kN 양방향", "source_views": "D1 평면도, D1 단면도, D2 교량받침 상세·ELEVATION TABLE"}, "faces": 6, "solid": true, "volume": 29366666.7}, "P1-BS09": {"layer": "P1::받침대좌", "type": "Brep", "hidden": false, "locked": false, "colour_source": 0, "colour": [0, 0, 0], "bbox": [1914.67, -95.8, 43627.0, 3207.17, 1242.6, 43766.0], "user": {"fck": "40MPa", "id": "P1-BS09", "role": "bearing pedestal h1 NO.9 girder 4 rear", "source_views": "D1 평면도, D1 단면도, D2 ELEVATION TABLE"}, "faces": 6, "solid": true, "volume": 208505497.4}, "P1-BP08": {"layer": "P1::받침패드", "type": "Brep", "hidden": false, "locked": false, "colour_source": 0, "colour": [0, 0, 0], "bbox": [-406.03, 127.46, 43694.0, 491.43, 1072.14, 43744.0], "user": {"fck": "-", "id": "P1-BP08", "role": "bearing pad h2 NO.8 2800 kN 교축방향", "source_views": "D1 평면도, D1 단면도, D2 교량받침 상세·ELEVATION TABLE"}, "faces": 6, "solid": true, "volume": 34041666.7}, "P1-BS08": {"layer": "P1::받침대좌", "type": "Brep", "hidden": false, "locked": false, "colour_source": 0, "colour": [0, 0, 0], "bbox": [-590.67, -95.8, 43555.0, 701.83, 1242.6, 43694.0], "user": {"fck": "40MPa", "id": "P1-BS08", "role": "bearing pedestal h1 NO.8 girder 3 rear", "source_views": "D1 평면도, D1 단면도, D2 ELEVATION TABLE"}, "faces": 6, "solid": true, "volume": 208505497.4}, "P1-BP07": {"layer": "P1::받침패드", "type": "Brep", "hidden": false, "locked": false, "colour_source": 0, "colour": [0, 0, 0], "bbox": [-2856.41, 130.44, 43622.0, -2068.79, 1069.16, 43672.0], "user": {"fck": "-", "id": "P1-BP07", "role": "bearing pad h2 NO.7 2800 kN 양방향 [추론: 평행 이동]", "source_views": "D1 평면도, D1 단면도, D2 교량받침 상세·ELEVATION TABLE"}, "faces": 6, "solid": true, "volume": 29366666.7}, "P1-BS07": {"layer": "P1::받침대좌", "type": "Brep", "hidden": false, "locked": false, "colour_source": 0, "colour": [0, 0, 0], "bbox": [-3096.0, -95.8, 43483.0, -1803.5, 1242.6, 43622.0], "user": {"fck": "40MPa", "id": "P1-BS07", "role": "bearing pedestal h1 NO.7 girder 2 rear [추론: 평행 이동]", "source_views": "D1 평면도, D1 단면도, D2 ELEVATION TABLE"}, "faces": 6, "solid": true, "volume": 208505497.5}, "P1-BP06": {"layer": "P1::받침패드", "type": "Brep", "hidden": false, "locked": false, "colour_source": 0, "colour": [0, 0, 0], "bbox": [-5361.71, 130.44, 43550.0, -4574.09, 1069.16, 43600.0], "user": {"fck": "-", "id": "P1-BP06", "role": "bearing pad h2 NO.6 2800 kN 양방향 [추론: 평행 이동]", "source_views": "D1 평면도, D1 단면도, D2 교량받침 상세·ELEVATION TABLE"}, "faces": 6, "solid": true, "volume": 29366666.7}, "P1-BS06": {"layer": "P1::받침대좌", "type": "Brep", "hidden": false, "locked": false, "colour_source": 0, "colour": [0, 0, 0], "bbox": [-5601.33, -95.8, 43411.0, -4308.83, 1242.6, 43550.0], "user": {"fck": "40MPa", "id": "P1-BS06", "role": "bearing pedestal h1 NO.6 girder 1 rear [추론: 평행 이동]", "source_views": "D1 평면도, D1 단면도, D2 ELEVATION TABLE"}, "faces": 6, "solid": true, "volume": 208505497.4}, "P1-BP05": {"layer": "P1::받침패드", "type": "Brep", "hidden": false, "locked": false, "colour_source": 0, "colour": [0, 0, 0], "bbox": [4514.99, -1178.72, 43862.0, 5421.61, -216.88, 43912.0], "user": {"fck": "-", "id": "P1-BP05", "role": "bearing pad h2 NO.5 3500 kN 양Line truncated

Code/교각모델링앱/검증/web_test_data/테스트P1/runs/current/G1_gate.json

@@ -0,0 +1,78 @@
+{
+ "gate": "G1",
+ "checker": "g1_shape.py",
+ "verdict": "PASS",
+ "summary": {
+  "total": 171,
+  "passed": 171,
+  "failed": 0,
+  "volumes_m3": {
+   "lean": 6.792,
+   "footing": 160.446,
+   "column": 37.709,
+   "coping": 89.586
+  },
+  "pile_volume_each_m3": 6.899
+ },
+ "unplanned_fails": [],
+ "planned_fails": [],
+ "negative": {
+  "negH": {
+   "move": {
+    "id": "BS08",
+    "d": [
+     3,
+     0,
+     0
+    ]
+   },
+   "new_fails": [
+    "rear pedestal pitch girder 2-3",
+    "rear pedestal pitch girder 3-4"
+   ],
+   "detected": true
+  },
+  "negV": {
+   "move": {
+    "id": "BP03",
+    "d": [
+     0,
+     0,
+     2
+    ]
+   },
+   "new_fails": [
+    "NO.3 pad top = EL.'X'"
+   ],
+   "detected": true
+  }
+ },
+ "reload": {
+  "built": 54,
+  "reopened": 54,
+  "fingerprint": 54,
+  "ok": true
+ },
+ "unchanged": {
+  "compared": 0,
+  "diffs": [],
+  "missing": [],
+  "ok": true,
+  "against": null
+ },
+ "model": "C:\\Users\\User\\Desktop\\바이브코딩\\pier_T\\Code\\교각모델링앱\\검증\\web_test_data\\테스트P1\\runs\\current\\G1.3dm",
+ "mode": "single",
+ "secs": 28.6,
+ "build_steps": [
+  {
+   "name": "G1:concrete.py",
+   "secs": 0.38
+  },
+  {
+   "name": "display.py",
+   "secs": 0.02
+  }
+ ],
+ "inputs_sha": "a07fc78446227a14",
+ "job_id": "1978149fef91"
+}

Code/교각모델링앱/검증/web_test_data/테스트P1/runs/current/G1_job.json

@@ -0,0 +1,12 @@
+{
+ "id": "1978149fef91",
+ "pid": 9436,
+ "state": "완료",
+ "at": "2026-10-20 14:01:56",
+ "log": [
+  "Rhino 작업 시작",
+  "[G1] build G1..G1",
+  "[G1] re-open, check, negative tests, fingerprint",
+  "[G1] PASS  checks 171/171 (planned FAIL 0, unplanned 0)  negative H/V True/True  reload True  unchanged True (0)  28.6s"
+ ]
+}

Code/교각모델링앱/검증/web_test_data/테스트P1/runs/current/G2.json

@@ -0,0 +1,425 @@
+{
+ "summary": {
+  "total": 42,
+  "passed": 42,
+  "failed": 0,
+  "min_cover": {
+   "P1": 113.5,
+   "P2": 158.5,
+   "P3": 93.5,
+   "P4": 109.7,
+   "P5": 93.5,
+   "P6": 74.0
+  }
+ },
+ "results": [
+  {
+   "check": "C8",
+   "item": "P1 bar count",
+   "expected": 46,
+   "actual": 46,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P1 pipes closed & paired with centrelines",
+   "detail": "pipes 46 / centrelines 46",
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P2 bar count",
+   "expected": 46,
+   "actual": 46,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P2 pipes closed & paired with centrelines",
+   "detail": "pipes 46 / centrelines 46",
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P3 bar count",
+   "expected": 36,
+   "actual": 36,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P3 pipes closed & paired with centrelines",
+   "detail": "pipes 72 / centrelines 72",
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P4 bar count",
+   "expected": 9,
+   "actual": 9,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P4 pipes closed & paired with centrelines",
+   "detail": "pipes 18 / centrelines 18",
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P5 bar count",
+   "expected": 22,
+   "actual": 22,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P5 pipes closed & paired with centrelines",
+   "detail": "pipes 22 / centrelines 22",
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P6 bar count",
+   "expected": 36,
+   "actual": 36,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P6 pipes closed & paired with centrelines",
+   "detail": "pipes 36 / centrelines 36",
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P1 original length (+coupler b) vs schedule L (worst of 46)",
+   "expected": 0,
+   "actual": 0.071,
+   "diff": 0.071,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P1 curve length - L (record, fillets shorten hooks)",
+   "detail": "min 0.1 / max 0.1 mm",
+   "result": "INFO"
+  },
+  {
+   "check": "C8",
+   "item": "P1 curve length (+coupler b) vs L (no fillet)",
+   "expected": 0,
+   "actual": 0.071,
+   "diff": 0.071,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P2 original length (+coupler b) vs schedule L (worst of 46)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P2 curve length - L (record, fillets shorten hooks)",
+   "detail": "min 0.0 / max 0.0 mm",
+   "result": "INFO"
+  },
+  {
+   "check": "C8",
+   "item": "P2 curve length (+coupler b) vs L (no fillet)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P3 original length (+coupler b) vs schedule L (worst of 36)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P3 curve length - L (record, fillets shorten hooks)",
+   "detail": "min -493.1 / max -493.1 mm",
+   "result": "INFO"
+  },
+  {
+   "check": "C8",
+   "item": "P4 original length (+coupler b) vs schedule L (worst of 9)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P4 curve length - L (record, fillets shorten hooks)",
+   "detail": "min 0.0 / max 0.0 mm",
+   "result": "INFO"
+  },
+  {
+   "check": "C8",
+   "item": "P4 curve length (+coupler b) vs L (no fillet)",
+   "expected": 0,
+   "actual": 0.017,
+   "diff": 0.017,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P5 original length (+coupler b) vs schedule L (worst of 22)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P5 curve length - L (record, fillets shorten hooks)",
+   "detail": "min 0.0 / max 0.0 mm",
+   "result": "INFO"
+  },
+  {
+   "check": "C8",
+   "item": "P5 curve length (+coupler b) vs L (no fillet)",
+   "expected": 0,
+   "actual": 0.017,
+   "diff": 0.017,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P6 original length (+coupler b) vs schedule L (worst of 36)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P6 curve length - L (record, fillets shorten hooks)",
+   "detail": "min -20.6 / max -20.6 mm",
+   "result": "INFO"
+  },
+  {
+   "check": "C8",
+   "item": "P1 top EL",
+   "expected": 43061,
+   "actual": 43061.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P1 radius (worst)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 0.5,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P1 angle vs i*360/46 (worst, deg)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 0.01,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P2 top EL",
+   "expected": 43061,
+   "actual": 43061.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P2 radius (worst)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 0.5,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P2 angle vs i*360/46 (worst, deg)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 0.01,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P1 hook leg EL (footing bottom + 300)",
+   "expected": 26508,
+   "actual": 26508.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P2 bottom EL",
+   "expected": 26508,
+   "actual": 26508.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P4 radius",
+   "expected": 897,
+   "actual": 897.0,
+   "diff": 0.0,
+   "tol": 0.5,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P5 radius",
+   "expected": 897,
+   "actual": 897.0,
+   "diff": 0.0,
+   "tol": 0.5,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "hoop level count 67",
+   "detail": "67",
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "hoop levels vs dim chain (worst)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "hoop marks by zone (P4 x9, P5 x22, P3 x36)",
+   "detail": "",
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "tie levels vs chain + 17.5 (worst)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "concrete union for cover",
+   "detail": "1 brep",
+   "result": "INFO"
+  },
+  {
+   "check": "C8",
+   "item": "P1 sample points outside concrete",
+   "expected": 0,
+   "actual": 0,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P2 sample points outside concrete",
+   "expected": 0,
+   "actual": 0,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P3 sample points outside concrete",
+   "expected": 0,
+   "actual": 0,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P4 sample points outside concrete",
+   "expected": 0,
+   "actual": 0,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P5 sample points outside concrete",
+   "expected": 0,
+   "actual": 0,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P6 sample points outside concrete",
+   "expected": 0,
+   "actual": 0,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "min cover to concrete surface per mark (record)",
+   "detail": "{\"P1\": 113.5, \"P2\": 158.5, \"P3\": 93.5, \"P4\": 109.7, \"P5\": 93.5, \"P6\": 74.0}",
+   "result": "INFO"
+  },
+  {
+   "check": "C8",
+   "item": "clearance P1 outer surface vs hoop inner surface (record)",
+   "detail": "1.0 mm",
+   "result": "INFO"
+  }
+ ]
+}

Code/교각모델링앱/검증/web_test_data/테스트P1/runs/current/G2_job.json

@@ -0,0 +1,11 @@
+{
+ "id": "a136d9b52980",
+ "pid": 9436,
+ "state": "실행 중",
+ "at": "2026-10-20 14:02:10",
+ "log": [
+  "Rhino 작업 시작",
+  "[G2] build G1..G2",
+  "[G2] re-open, check, negative tests, fingerprint"
+ ]
+}

Code/교각모델링앱/검증/web_test_data/테스트P1/runs/current/G2_negH.json

@@ -0,0 +1,425 @@
+{
+ "summary": {
+  "total": 42,
+  "passed": 41,
+  "failed": 1,
+  "min_cover": {
+   "P1": 113.5,
+   "P2": 153.5,
+   "P3": 93.5,
+   "P4": 109.7,
+   "P5": 93.5,
+   "P6": 74.0
+  }
+ },
+ "results": [
+  {
+   "check": "C8",
+   "item": "P1 bar count",
+   "expected": 46,
+   "actual": 46,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P1 pipes closed & paired with centrelines",
+   "detail": "pipes 46 / centrelines 46",
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P2 bar count",
+   "expected": 46,
+   "actual": 46,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P2 pipes closed & paired with centrelines",
+   "detail": "pipes 46 / centrelines 46",
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P3 bar count",
+   "expected": 36,
+   "actual": 36,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P3 pipes closed & paired with centrelines",
+   "detail": "pipes 72 / centrelines 72",
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P4 bar count",
+   "expected": 9,
+   "actual": 9,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P4 pipes closed & paired with centrelines",
+   "detail": "pipes 18 / centrelines 18",
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P5 bar count",
+   "expected": 22,
+   "actual": 22,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P5 pipes closed & paired with centrelines",
+   "detail": "pipes 22 / centrelines 22",
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P6 bar count",
+   "expected": 36,
+   "actual": 36,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P6 pipes closed & paired with centrelines",
+   "detail": "pipes 36 / centrelines 36",
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P1 original length (+coupler b) vs schedule L (worst of 46)",
+   "expected": 0,
+   "actual": 0.071,
+   "diff": 0.071,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P1 curve length - L (record, fillets shorten hooks)",
+   "detail": "min 0.1 / max 0.1 mm",
+   "result": "INFO"
+  },
+  {
+   "check": "C8",
+   "item": "P1 curve length (+coupler b) vs L (no fillet)",
+   "expected": 0,
+   "actual": 0.071,
+   "diff": 0.071,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P2 original length (+coupler b) vs schedule L (worst of 46)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P2 curve length - L (record, fillets shorten hooks)",
+   "detail": "min 0.0 / max 0.0 mm",
+   "result": "INFO"
+  },
+  {
+   "check": "C8",
+   "item": "P2 curve length (+coupler b) vs L (no fillet)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P3 original length (+coupler b) vs schedule L (worst of 36)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P3 curve length - L (record, fillets shorten hooks)",
+   "detail": "min -493.1 / max -493.1 mm",
+   "result": "INFO"
+  },
+  {
+   "check": "C8",
+   "item": "P4 original length (+coupler b) vs schedule L (worst of 9)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P4 curve length - L (record, fillets shorten hooks)",
+   "detail": "min 0.0 / max 0.0 mm",
+   "result": "INFO"
+  },
+  {
+   "check": "C8",
+   "item": "P4 curve length (+coupler b) vs L (no fillet)",
+   "expected": 0,
+   "actual": 0.017,
+   "diff": 0.017,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P5 original length (+coupler b) vs schedule L (worst of 22)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P5 curve length - L (record, fillets shorten hooks)",
+   "detail": "min 0.0 / max 0.0 mm",
+   "result": "INFO"
+  },
+  {
+   "check": "C8",
+   "item": "P5 curve length (+coupler b) vs L (no fillet)",
+   "expected": 0,
+   "actual": 0.017,
+   "diff": 0.017,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P6 original length (+coupler b) vs schedule L (worst of 36)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P6 curve length - L (record, fillets shorten hooks)",
+   "detail": "min -20.6 / max -20.6 mm",
+   "result": "INFO"
+  },
+  {
+   "check": "C8",
+   "item": "P1 top EL",
+   "expected": 43061,
+   "actual": 43061.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P1 radius (worst)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 0.5,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P1 angle vs i*360/46 (worst, deg)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 0.01,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P2 top EL",
+   "expected": 43061,
+   "actual": 43061.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P2 radius (worst)",
+   "expected": 0,
+   "actual": 5.0,
+   "diff": 5.0,
+   "tol": 0.5,
+   "result": "FAIL"
+  },
+  {
+   "check": "C8",
+   "item": "P2 angle vs i*360/46 (worst, deg)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 0.01,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P1 hook leg EL (footing bottom + 300)",
+   "expected": 26508,
+   "actual": 26508.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P2 bottom EL",
+   "expected": 26508,
+   "actual": 26508.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P4 radius",
+   "expected": 897,
+   "actual": 897.0,
+   "diff": 0.0,
+   "tol": 0.5,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P5 radius",
+   "expected": 897,
+   "actual": 897.0,
+   "diff": 0.0,
+   "tol": 0.5,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "hoop level count 67",
+   "detail": "67",
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "hoop levels vs dim chain (worst)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "hoop marks by zone (P4 x9, P5 x22, P3 x36)",
+   "detail": "",
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "tie levels vs chain + 17.5 (worst)",
+   "expected": 0,
+   "actual": 0.0,
+   "diff": 0.0,
+   "tol": 1.0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "concrete union for cover",
+   "detail": "1 brep",
+   "result": "INFO"
+  },
+  {
+   "check": "C8",
+   "item": "P1 sample points outside concrete",
+   "expected": 0,
+   "actual": 0,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P2 sample points outside concrete",
+   "expected": 0,
+   "actual": 0,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P3 sample points outside concrete",
+   "expected": 0,
+   "actual": 0,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P4 sample points outside concrete",
+   "expected": 0,
+   "actual": 0,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P5 sample points outside concrete",
+   "expected": 0,
+   "actual": 0,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "P6 sample points outside concrete",
+   "expected": 0,
+   "actual": 0,
+   "diff": 0,
+   "tol": 0,
+   "result": "PASS"
+  },
+  {
+   "check": "C8",
+   "item": "min cover to concrete surface per mark (record)",
+   "detail": "{\"P1\": 113.5, \"P2\": 153.5, \"P3\": 93.5, \"P4\": 109.7, \"P5\": 93.5, \"P6\": 74.0}",
+   "result": "INFO"
+  },
+  {
+   "check": "C8",
+   "item": "clearance P1 outer surface vs hoop inner surface (record)",
+   "detail": "1.0 mm",
+   "result": "INFO"
+  }
+ ]
+}

Code/교각모델링앱/검증/web_test_data/테스트P1/runs/current/approvals.json

@@ -0,0 +1,9 @@
+{
+ "G1": {
+  "decision": "승인",
+  "by": "테스트",
+  "note": "",
+  "at": "2026-10-20 14:01:58",
+  "inputs_sha": "a07fc78446227a14"
+ }
+}

Code/교각모델링앱/검증/web_test_data/테스트P1/variability.json

@@ -0,0 +1,309 @@
+{
+ "_schema": "variability/1",
+ "status": "초안 — 템플릿 담당자 확정 전",
+ "grades": {
+  "V1": "값 변수",
+  "V2": "목록 변수",
+  "V3": "생성 변수",
+  "F": "고정"
+ },
+ "sections": {
+  "params:_meta": {
+   "grade": "F",
+   "source": [
+    "템플릿 고정"
+   ],
+   "fixed_fields": [],
+   "note": "참고 정보(게이트가 쓰지 않음)",
+   "info": true
+  },
+  "params:lean_concrete": {
+   "grade": "V1",
+   "source": [
+    "표 밖 치수"
+   ],
+   "fixed_fields": [],
+   "note": "버림콘크리트 치수·EL",
+   "info": false
+  },
+  "params:footing": {
+   "grade": "V1",
+   "source": [
+    "표 밖 치수"
+   ],
+   "fixed_fields": [],
+   "note": "기초 치수·EL (rot_deg = 기초 회전 각도 값)",
+   "info": false
+  },
+  "params:column": {
+   "grade": "V1",
+   "source": [
+    "표 밖 치수"
+   ],
+   "fixed_fields": [
+    "shape"
+   ],
+   "note": "기둥 지름·높이 (단면 형식 shape는 고정)",
+   "info": false
+  },
+  "params:coping": {
+   "grade": "V2",
+   "source": [
+    "표 밖 치수"
+   ],
+   "fixed_fields": [
+    "form"
+   ],
+   "note": "코핑 외곽·치수 (형식 form은 고정)",
+   "info": false
+  },
+  "params:piles": {
+   "grade": "V1",
+   "source": [
+    "표 밖 치수"
+   ],
+   "fixed_fields": [
+    "kind"
+   ],
+   "note": "말뚝 개수·간격·길이 (말뚝 유무는 템플릿 형식)",
+   "info": false
+  },
+  "params:hitl_decisions_2026_10_07": {
+   "grade": "F",
+   "source": [
+    "템플릿 고정"
+   ],
+   "fixed_fields": [],
+   "note": "참고 정보(게이트가 쓰지 않음)",
+   "info": true
+  },
+  "params:bearing_seats": {
+   "grade": "V1",
+   "source": [
+    "표",
+    "표 밖 치수"
+   ],
+   "fixed_fields": [
+    "pedestal",
+    "pedestals"
+   ],
+   "note": "받침 표 값 + 평면 위치 (대좌 구조는 고정)",
+   "info": false
+  },
+  "params:column_rebar": {
+   "grade": "V2",
+   "source": [
+    "표 밖 치수"
+   ],
+   "fixed_fields": [
+    "form"
+   ],
+   "note": "기둥 철근 사슬·위치",
+   "info": false
+  },
+  "params:footing_rebar": {
+   "grade": "V2",
+   "source": [
+    "표 밖 치수"
+   ],
+   "fixed_fields": [
+    "form"
+   ],
+   "note": "기초 철근 위치 사슬",
+   "info": false
+  },
+  "params:coping_rebar": {
+   "grade": "V2",
+   "source": [
+    "표 밖 치수"
+   ],
+   "fixed_fields": [
+    "form",
+    "host",
+    "group"
+   ],
+   "note": "코핑 철근",
+   "info": false
+  },
+  "params:sole_plates": {
+   "grade": "V1",
+   "source": [
+    "표"
+   ],
+   "fixed_fields": [
+    "bearing_size"
+   ],
+   "note": "솔플레이트 표 값 (받침 크기 규칙은 고정)",
+   "info": false
+  },
+  "params:_schema": {
+   "grade": "F",
+   "source": [
+    "템플릿 고정"
+   ],
+   "fixed_fields": [],
+   "note": "참고 정보(게이트가 쓰지 않음)",
+   "info": true
+  },
+  "params:pier_id": {
+   "grade": "F",
+   "source": [
+    "템플릿 고정"
+   ],
+   "fixed_fields": [],
+   "note": "교각 식별자",
+   "info": false
+  },
+  "params:rebar_marks": {
+   "grade": "V1",
+   "source": [
+    "표"
+   ],
+   "fixed_fields": [
+    "*.shape"
+   ],
+   "note": "재료표 직경·형상 (마크 체계의 형상은 고정)",
+   "info": false
+  },
+  "params:rebar_marks_src": {
+   "grade": "F",
+   "source": [
+    "템플릿 고정"
+   ],
+   "fixed_fields": [],
+   "note": "참고 정보(게이트가 쓰지 않음)",
+   "info": true
+  },
+  "params:materials": {
+   "grade": "V1",
+   "source": [
+    "표 밖 치수"
+   ],
+   "fixed_fields": [],
+   "note": "재료 강도 주기",
+   "info": false
+  },
+  "params:display": {
+   "grade": "F",
+   "source": [
+    "템플릿 고정"
+   ],
+   "fixed_fields": [],
+   "note": "표시·색 설정",
+   "info": false
+  },
+  "expected:_schema": {
+   "grade": "F",
+   "source": [
+    "템플릿 고정"
+   ],
+   "fixed_fields": [],
+   "note": "참고 정보(게이트가 쓰지 않음)",
+   "info": true
+  },
+  "expected:_note": {
+   "grade": "F",
+   "source": [
+    "템플릿 고정"
+   ],
+   "fixed_fields": [],
+   "note": "참고 정보(게이트가 쓰지 않음)",
+   "info": true
+  },
+  "expected:pier_id": {
+   "grade": "F",
+   "source": [
+    "템플릿 고정"
+   ],
+   "fixed_fields": [],
+   "note": "교각 식별자",
+   "info": false
+  },
+  "expected:tol_mm": {
+   "grade": "V1",
+   "source": [
+    "사람 입력"
+   ],
+   "fixed_fields": [],
+   "note": "허용 오차",
+   "info": false
+  },
+  "expected:G1": {
+   "grade": "V2",
+   "source": [
+    "표",
+    "표 밖 치수"
+   ],
+   "fixed_fields": [],
+   "note": "독립 기대값 (params와 따로 도면에서 옮긴 값)",
+   "info": false
+  },
+  "expected:G2": {
+   "grade": "V2",
+   "source": [
+    "표",
+    "표 밖 치수"
+   ],
+   "fixed_fields": [],
+   "note": "독립 기대값 (params와 따로 도면에서 옮긴 값)",
+   "info": false
+  },
+  "expected:G3": {
+   "grade": "V2",
+   "source": [
+    "표",
+    "표 밖 치수"
+   ],
+   "fixed_fields": [],
+   "note": "독립 기대값 (params와 따로 도면에서 옮긴 값)",
+   "info": false
+  },
+  "expected:G4": {
+   "grade": "V2",
+   "source": [
+    "표",
+    "표 밖 치수"
+   ],
+   "fixed_fields": [],
+   "note": "독립 기대값 (params와 따로 도면에서 옮긴 값)",
+   "info": false
+  },
+  "expected:G5": {
+   "grade": "V2",
+   "source": [
+    "표",
+    "표 밖 치수"
+   ],
+   "fixed_fields": [],
+   "note": "독립 기대값 (params와 따로 도면에서 옮긴 값)",
+   "info": false
+  },
+  "expected:rebar_palette": {
+   "grade": "V1",
+   "source": [
+    "사람 입력"
+   ],
+   "fixed_fields": [],
+   "note": "철근 직경별 색 (사람 결정 기록)",
+   "info": false
+  },
+  "expected:rebar_palette_src": {
+   "grade": "F",
+   "source": [
+    "템플릿 고정"
+   ],
+   "fixed_fields": [],
+   "note": "참고 정보(게이트가 쓰지 않음)",
+   "info": true
+  },
+  "expected:planned_fail": {
+   "grade": "V1",
+   "source": [
+    "사람 입력"
+   ],
+   "fixed_fields": [],
+   "note": "계획된 FAIL (사람 결정 기록)",
+   "info": false
+  }
+ }
+}