chore(rebar): Pier_T_rebar 작업 폴더 초기 구성 및 외부 의존 파일 통합

- Code\rebar_pipeline, review_pipeline, pier-program을 정션에서 실제 폴더로 전환
- Code\rhino_mcp 및 CLAUDE_rhino배경.md 추가, .mcp.json은 PYTHONPATH로 새 위치 사용
- pier-program 내부 .git 제거(이력은 backup\pier-program_20261028.bundle에 보관)
- worktree 가이드 반영(CLAUDE.local.md, HANDOFF.md)
- D:\Rhino-MCP 경로 참조를 새 위치로 치환

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

Code/교각모델링앱/검증/rampa_g2_test_rampa.log

@@ -0,0 +1,20 @@
+PASS 운곡교P1: table records unchanged 
+PASS 운곡교P1: proposals unchanged 
+PASS 운곡교p2: table records unchanged 
+PASS 운곡교p2: proposals unchanged 
+PASS 산외교울산P1: table records unchanged 
+PASS 산외교울산P1: proposals unchanged 
+PASS ELEVATION TABLE: 2 rows NO.1 / NO.2 ['1', '2']
+PASS ELEVATION TABLE: all 15 columns read [16, 16]
+PASS ELEVATION TABLE NO.2 EL.'X' 60.427, C3 1400 
+PASS 솔플레이트 TABLE: 2 rows, L '1,000' [{'_key': '1', 'S(%)': '-5.526', 'L': '1,000', 'W': '900', 'T': '50', 'T1': '78', 'T2': '22'}, {'_key': '2', 'S(%)': '-5.526', 'L': '1,000', 'W': '900', 'T': '50', 'T1': '78', 'T2': '22'}]
+PASS thousands separator 
+PASS candidates all equal the typed inputs (36 rows) []
+PASS candidates cover G1 seats, G5 el_x, params bearings and sole plates ['expected.G1.seats', 'expected.G2.schedule_L', 'expected.G2.schedule_n', 'expected.G5.L', 'expected.G5.S', 'expected.G5.T', 'expected.G5.W', 'expected.G5.el_x', 'expected.G5.h3', 'params.bearing_seats.bearings', 'params.rebar_marks.P1', 'params.sole_plates.h3', 'params.sole_plates.table']
+PASS G1 gate PASS 97/97, negatives detected, reload ok {'total': 97, 'passed': 97, 'failed': 0, 'volumes_m3': {'pile1': 32.53, 'pile2': 25.525, 'column': 37.699, 'coping': 31.393}}
+PASS G2 gate PASS 26/26, negatives detected, reload ok {'total': 26, 'passed': 26, 'failed': 0, 'min_cover': {'P1': 107.5, 'P2': 91.0, 'P3': 76.0}}
+PASS G5 gate PASS 39/39, negatives detected, reload ok {'total': 39, 'passed': 39, 'failed': 0}
+PASS G2 min side cover P1 107.5 / P2 91 / P3 76 (R 1,000 - radial - bar radius) {'P1': 107.5, 'P2': 91.0, 'P3': 76.0}
+PASS scope G1, G2, G5 ['G1', 'G2', 'G5']
+PASS template Ramp-A교P1형 = pier inputs 
+RESULT PASS