chore(rebar): Pier_T_rebar 작업 폴더 초기 구성 및 외부 의존 파일 통합

- Code\rebar_pipeline, review_pipeline, pier-program을 정션에서 실제 폴더로 전환
- Code\rhino_mcp 및 CLAUDE_rhino배경.md 추가, .mcp.json은 PYTHONPATH로 새 위치 사용
- pier-program 내부 .git 제거(이력은 backup\pier-program_20261028.bundle에 보관)
- worktree 가이드 반영(CLAUDE.local.md, HANDOFF.md)
- D:\Rhino-MCP 경로 참조를 새 위치로 치환

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

Code/교각모델링앱/검증/_rerun_test_web_20261019.log

@@ -0,0 +1,50 @@
+PASS non-T pier rejected ␍
+PASS T pier created from template ␍
+PASS upload converts 3 DWG and indexes texts 2366 texts, 4s␍
+PASS non-DWG upload refused ␍
+PASS search finds 'EL. 26.208' ␍
+PASS bad regex reported, no crash ␍
+PASS candidates: 257 rows (166 + 91 params), 0 different ␍
+PASS edited value detected as different ␍
+PASS apply candidate restores drawing value ␍
+PASS type change refused ␍
+PASS invalid JSON refused ␍
+PASS G1 blocked while sections unconfirmed ␍
+PASS all required sections confirmed 23␍
+PASS G2 blocked before G1 approval ␍
+PASS G1 run via app -> PASS {'total': 171, 'passed': 171, 'failed': 0, 'volumes_m3': {'lean': 6.792, 'footing': 160.446, 'column': 37.709, 'coping': 89.586}, 'pile_volume_each_m3': 6.899} ␍
+PASS G1 approval needs a name ␍
+PASS G1 approved ␍
+PASS G2 run via app -> PASS {'total': 42, 'passed': 42, 'failed': 0, 'min_cover': {'P1': 113.5, 'P2': 158.5, 'P3': 93.5, 'P4': 109.7, 'P5': 93.5, 'P6': 74.0}} 66s ␍
+PASS G2 approval needs a name ␍
+PASS G2 approved ␍
+PASS G3 run via app -> PASS {'total': 73, 'passed': 72, 'failed': 1, 'cover': {'B1': 87.5, 'B2': 87.5, 'B3': 90.5, 'B4': 87.5, 'B5': 58.5, 'B6': 57.5, 'B7': 90.5, 'B8': 85.5, 'B9': 69.5, '␍
+PASS G3 approval needs a name ␍
+PASS G3 approved ␍
+PASS G4 run via app -> PASS {'total': 116, 'passed': 111, 'failed': 5, 'cover': {'C1': 85.4, 'C2': 85.2, 'C3': 85.5, 'C4': 85.4, 'C5': 85.2, 'C6': 85.5, 'C7': 84.4, 'C8': 84.4, 'C9': 87.5,␍
+PASS G4 approval needs a name ␍
+PASS G4 approved ␍
+PASS G5 run via app -> PASS {'total': 183, 'passed': 183, 'failed': 0} 33s ␍
+PASS G5 approval needs a name ␍
+PASS G5 approved ␍
+PASS download G5.3dm 48288068 bytes␍
+PASS report self-check ok (chapters, vocabulary, 37 schedule rows, 5 gate rows) {'chapters_missing': [], 'vocab_bad': [], 'finding_rows': 6, 'finding_rows_without_source': 0, 'schedule_rows': 37, 'schedule_marks': 37, 'gate_rows': 5, 'sched␍
+PASS report: all gates PASS and approved ␍
+PASS report: 6 planned FAIL listed as 불일치 6␍
+PASS report: B12 schedule 34 vs model 28 -> 불일치 ␍
+PASS report: other modelled marks match (35) 35␍
+PASS report: UA1 outside model ␍
+PASS report PDF download 123148␍
+PASS input change -> gate stale and approval void ␍
+PASS changed section needs re-confirmation ␍
+PASS orphaned running job shown as 중단됨 ␍
+PASS pile length +5 mm -> G1 FAIL (pile length) ['pile length'] trace [(0, True, '대기'), (3, True, '실행 중')]..[(27, True, '실행 중'), (30, True, '완료')]␍
+PASS FAIL gate cannot be approved ␍
+PASS rejection needs a reason ␍
+PASS rejection recorded ␍
+PASS page renders / ␍
+PASS page renders /pier/테스트P1 ␍
+PASS page renders /pier/테스트P1/gates ␍
+PASS page renders /pier/테스트P1/candidates ␍
+PASS page renders /pier/테스트P1/section/params/footing ␍
+TOTAL 49 / 49␍