chore(rebar): Pier_T_rebar 작업 폴더 초기 구성 및 외부 의존 파일 통합

- Code\rebar_pipeline, review_pipeline, pier-program을 정션에서 실제 폴더로 전환
- Code\rhino_mcp 및 CLAUDE_rhino배경.md 추가, .mcp.json은 PYTHONPATH로 새 위치 사용
- pier-program 내부 .git 제거(이력은 backup\pier-program_20261028.bundle에 보관)
- worktree 가이드 반영(CLAUDE.local.md, HANDOFF.md)
- D:\Rhino-MCP 경로 참조를 새 위치로 치환

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

Code/교각모델링앱/검증/_rerun_test_saejae_20261020.log

@@ -0,0 +1,12 @@
+PASS 운곡교P1: table records / proposals unchanged ␍
+PASS 운곡교p2: table records / proposals unchanged ␍
+PASS 산외교울산P1: table records / proposals unchanged ␍
+PASS scope G1 + G2 + G3 + G4 + G5, checker g1_pedestal.py ␍
+PASS spread footing (no piles), 10 bearings on 5 shared pedestals ␍
+PASS saved template ␍
+PASS G1 gate PASS 138/138, negatives detected {'total': 138, 'passed': 138, 'failed': 0, 'volumes_m3': {'lean': 6.241, 'footing': 154.154, 'column': 64.242, 'coping': 86.923, 'pile_each': 0}}␍
+PASS G2 gate PASS 41/41, negatives detected {'total': 41, 'passed': 41, 'failed': 0, 'min_cover': {'P1': 109.0, 'P2': 134.0, 'P3': 84.0, 'P4': 90.0, 'P5': 65.5}}␍
+PASS G3 gate PASS 72/76, negatives detected {'total': 76, 'passed': 72, 'failed': 4, 'cover': {'B1': 87.5, 'B2': 87.5, 'B3': 87.5, 'B4': 87.5, 'B5': 87.5, 'B6': 65.0, 'B7': 87.5, 'B8': 65.0, 'B9': 68.5, 'B10': 68.0, 'B11': 90.5, 'B12': 90.5}}␍
+PASS G4 gate PASS 189/189, negatives detected {'total': 189, 'passed': 189, 'failed': 0, 'cover': {'C1': 110.0, 'C4': 110.0, 'C2': 110.5, 'C3': 110.5, 'C5': 110.5, 'C6': 110.5, 'C7': 110.5, 'C8': 89.5, 'C9': 89.5, 'C10': 89.5, 'C11': 89.5, 'C12': 84.3, 'C13': 89.5, 'C14': 114.0, 'C15': 114.0, 'C16': 114.0, 'C17': 114.0, 'C18': 115.5, 'C19': 115␍
+PASS G5 gate PASS 183/183, negatives detected {'total': 183, 'passed': 183, 'failed': 0}␍
+RESULT PASS␍