chore(rebar): Pier_T_rebar 작업 폴더 초기 구성 및 외부 의존 파일 통합
- Code\rebar_pipeline, review_pipeline, pier-program을 정션에서 실제 폴더로 전환 - Code\rhino_mcp 및 CLAUDE_rhino배경.md 추가, .mcp.json은 PYTHONPATH로 새 위치 사용 - pier-program 내부 .git 제거(이력은 backup\pier-program_20261028.bundle에 보관) - worktree 가이드 반영(CLAUDE.local.md, HANDOFF.md) - D:\Rhino-MCP 경로 참조를 새 위치로 치환 Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
This commit is contained in:
ahnyongjooandClaude Sonnet 5.5 committed
commit
964a841de1
3978 files changed
+58013356
No files matched your search
@@ -0,0 +1,158 @@
|
||||
"""Verify bridge bearings (P1-BB) and sole plates (P1-SP), check C11, inside Rhino 8.
|
||||
|
||||
Expected values typed from D2 ELEVATION TABLE (EL.'X', h3) and 솔플레이트 상세 TABLE (S, L, W, T);
|
||||
orientation is compared with the modelled h2 pads (P1-BP). params.json is not read.
|
||||
Globals: __rhino_doc__, RESULT_PATH; optional FINGERPRINT_REF / FINGERPRINT_OUT (all objects except BB/SP).
|
||||
"""
|
||||
import json
|
||||
import math
|
||||
|
||||
import Rhino.Geometry as rg
|
||||
from Rhino.DocObjects import ObjectColorSource, ObjectEnumeratorSettings
|
||||
|
||||
doc = __rhino_doc__
|
||||
ELX = {1: 43625, 2: 43697, 3: 43768, 4: 43840, 5: 43912, 6: 43600, 7: 43672, 8: 43744, 9: 43816, 10: 43887}
|
||||
S = {1: -1.910, 2: -1.907, 3: -1.905, 4: -1.903, 5: -1.901, 6: -1.910, 7: -1.907, 8: -1.905, 9: -1.903, 10: -1.901}
|
||||
W = {1: 740, 2: 740, 3: 890, 4: 740, 5: 740, 6: 640, 7: 640, 8: 750, 9: 640, 10: 640}
|
||||
L, T, H3 = 800, 30, 181
|
||||
results = []
|
||||
|
||||
|
||||
def ALL():
|
||||
s = ObjectEnumeratorSettings()
|
||||
s.HiddenObjects = True
|
||||
s.LockedObjects = True
|
||||
return list(doc.Objects.GetObjectList(s))
|
||||
|
||||
|
||||
def check(item, exp, act, tol=1.0):
|
||||
results.append(dict(check="C11", item=item, expected=round(exp, 4), actual=round(act, 4),
|
||||
diff=round(act - exp, 4), tol=tol, result="PASS" if abs(act - exp) <= tol else "FAIL"))
|
||||
|
||||
|
||||
def flag(item, ok, detail=""):
|
||||
results.append(dict(check="C11", item=item, detail=detail, result="PASS" if ok else "FAIL"))
|
||||
|
||||
|
||||
def fingerprints():
|
||||
fp = {}
|
||||
for o in ALL():
|
||||
oid = o.Attributes.GetUserString("id")
|
||||
if not oid or oid.startswith(("P1-BB", "P1-SP")):
|
||||
continue
|
||||
g = o.Geometry
|
||||
bb = g.GetBoundingBox(True)
|
||||
if isinstance(g, rg.Brep):
|
||||
size = g.Faces.Count if oid.startswith("P1-R-") else rg.VolumeMassProperties.Compute(g).Volume / 1e6
|
||||
else:
|
||||
size = g.GetLength() if isinstance(g, rg.Curve) else 0
|
||||
fp[oid] = [round(v, 3) for v in (bb.Min.X, bb.Min.Y, bb.Min.Z, bb.Max.X, bb.Max.Y, bb.Max.Z, size)]
|
||||
return fp
|
||||
|
||||
|
||||
def edges_xy(brep):
|
||||
"""Return horizontal edge vectors of the lowest face (4 edges)."""
|
||||
zmin = min(v.Location.Z for v in brep.Vertices)
|
||||
out = []
|
||||
for e in brep.Edges:
|
||||
a, b = e.PointAtStart, e.PointAtEnd
|
||||
if abs(a.Z - zmin) < 0.01 and abs(b.Z - zmin) < 0.01 and a.DistanceTo(b) > 1:
|
||||
out.append(b - a)
|
||||
return out
|
||||
|
||||
|
||||
def split_axes(vecs):
|
||||
"""Bridge-axis (along) edge = within 45 deg of +Y; the other is across. Not by length: NO.3 has W > L
|
||||
(checker fix 2026-10-08)."""
|
||||
along = [v for v in vecs if abs(v.Y) > abs(v.X)]
|
||||
across = [v for v in vecs if abs(v.Y) <= abs(v.X)]
|
||||
return along[0], across[0]
|
||||
|
||||
|
||||
def axis_deg(vec):
|
||||
"""Angle of a plan vector from +Y, clockwise positive, folded to [-90, 90)."""
|
||||
a = math.degrees(math.atan2(vec.X, vec.Y))
|
||||
while a >= 90:
|
||||
a -= 180
|
||||
while a < -90:
|
||||
a += 180
|
||||
return a
|
||||
|
||||
|
||||
def main():
|
||||
if "FINGERPRINT_OUT" in globals():
|
||||
fp = fingerprints()
|
||||
json.dump(fp, open(FINGERPRINT_OUT, "w", encoding="utf-8"), indent=0)
|
||||
print("fingerprints written", len(fp))
|
||||
return
|
||||
objs = ALL()
|
||||
by = lambda p: {int(o.Attributes.GetUserString("id")[len(p):]): o for o in objs
|
||||
if (o.Attributes.GetUserString("id") or "").startswith(p)}
|
||||
bb, sp, pad = by("P1-BB"), by("P1-SP"), by("P1-BP")
|
||||
check("bearing count", 10, len(bb), tol=0)
|
||||
check("sole plate count", 10, len(sp), tol=0)
|
||||
flag("all 20 closed solids", all(o.Geometry.IsSolid for o in list(bb.values()) + list(sp.values())))
|
||||
for no in range(1, 11):
|
||||
gb, gs, gp = bb[no].Geometry, sp[no].Geometry, pad[no].Geometry
|
||||
bx, sx = gb.GetBoundingBox(True), gs.GetBoundingBox(True)
|
||||
check(f"NO.{no} bearing bottom = EL.'X'", ELX[no], bx.Min.Z)
|
||||
check(f"NO.{no} bearing height h3", H3, bx.Max.Z - bx.Min.Z, tol=0.01)
|
||||
ab, cb_ = split_axes(edges_xy(gb))
|
||||
check(f"NO.{no} bearing across (W-100)", W[no] - 100, cb_.Length, tol=0.5)
|
||||
check(f"NO.{no} bearing along (L-100)", L - 100, ab.Length, tol=0.5)
|
||||
e_s = edges_xy(gs)
|
||||
as_, cs_ = split_axes(e_s)
|
||||
check(f"NO.{no} sole plate across W", W[no], cs_.Length, tol=0.5)
|
||||
check(f"NO.{no} sole plate along L", L, as_.Length, tol=0.5)
|
||||
check(f"NO.{no} sole plate bottom = bearing top", bx.Max.Z, sx.Min.Z, tol=0.01)
|
||||
# orientation: long edges of bearing / sole plate vs h2 pad long edge
|
||||
long_b, long_s, long_p = ab, as_, split_axes(edges_xy(gp))[0]
|
||||
# plan centre = pad centre (horizontal position)
|
||||
pc = gp.GetBoundingBox(True).Center
|
||||
for nm, g in (("bearing", gb), ("sole plate", gs)):
|
||||
c = g.GetBoundingBox(True).Center
|
||||
check(f"NO.{no} {nm} plan centre offset from pad (mm)", 0, math.hypot(c.X - pc.X, c.Y - pc.Y), tol=1.0)
|
||||
check(f"NO.{no} bearing axis vs pad (deg)", axis_deg(long_p), axis_deg(long_b), tol=0.01)
|
||||
check(f"NO.{no} sole plate axis vs pad (deg)", axis_deg(long_p), axis_deg(long_s), tol=0.01)
|
||||
# slope along the long axis and thick end at -Y
|
||||
top = [v.Location for v in gs.Vertices if v.Location.Z > sx.Min.Z + 1]
|
||||
ua = rg.Vector3d(long_s.X, long_s.Y, 0)
|
||||
ua.Unitize()
|
||||
if ua.Y < 0:
|
||||
ua = -ua # along points to +Y
|
||||
c = rg.Point3d(sum(p.X for p in top) / 4, sum(p.Y for p in top) / 4, 0)
|
||||
proj = [((p - c) * ua, p.Z) for p in top]
|
||||
lo = [z for s_, z in proj if s_ < 0]
|
||||
hi = [z for s_, z in proj if s_ > 0]
|
||||
slope = (sum(hi) / len(hi) - sum(lo) / len(lo)) / L * 100
|
||||
check(f"NO.{no} sole plate slope S (%) along +Y-ward axis", S[no], slope, tol=0.01)
|
||||
check(f"NO.{no} sole plate centre thickness T", T, sum(z for _, z in proj) / 4 - sx.Min.Z, tol=0.01)
|
||||
flag(f"NO.{no} thick end at -Y", sum(lo) > sum(hi))
|
||||
# no transverse slope: the two top vertices at the same along-coordinate have equal Z
|
||||
pairs = sorted(proj)
|
||||
check(f"NO.{no} no transverse slope", 0, max(abs(pairs[0][1] - pairs[1][1]), abs(pairs[2][1] - pairs[3][1])),
|
||||
tol=0.01)
|
||||
for a, b2, name in ((gb, gp, "bearing-pad"), (gb, gs, "bearing-sole plate")):
|
||||
r = rg.Brep.CreateBooleanIntersection(a, b2, 0.01)
|
||||
v = sum(rg.VolumeMassProperties.Compute(x).Volume for x in r) if r else 0.0
|
||||
check(f"NO.{no} overlap {name} (mm3)", 0, v, tol=1.0)
|
||||
cb, cs = bb[no].Attributes, sp[no].Attributes
|
||||
flag(f"NO.{no} colours (bearing black, sole plate 150)",
|
||||
cb.ColorSource == ObjectColorSource.ColorFromObject and (cb.ObjectColor.R, cb.ObjectColor.G, cb.ObjectColor.B) == (0, 0, 0)
|
||||
and cs.ColorSource == ObjectColorSource.ColorFromObject and (cs.ObjectColor.R, cs.ObjectColor.G, cs.ObjectColor.B) == (150, 150, 150))
|
||||
if "FINGERPRINT_REF" in globals():
|
||||
ref = json.load(open(FINGERPRINT_REF, encoding="utf-8"))
|
||||
now = fingerprints()
|
||||
worst = max(abs(a - b) for k in ref for a, b in zip(ref[k], now.get(k, [1e9] * 7)))
|
||||
flag("existing objects (v0.1.08) unchanged", set(ref) == set(now) and worst <= 0.001,
|
||||
f"{len(now)}/{len(ref)} max diff {worst}")
|
||||
summ = dict(total=len(results), passed=sum(r["result"] == "PASS" for r in results),
|
||||
failed=sum(r["result"] == "FAIL" for r in results))
|
||||
json.dump(dict(summary=summ, results=results), open(RESULT_PATH, "w", encoding="utf-8"), ensure_ascii=False, indent=1)
|
||||
print(json.dumps(summ))
|
||||
for r in results:
|
||||
if r["result"] == "FAIL":
|
||||
print("FAIL", r)
|
||||
|
||||
|
||||
main()
|
||||
Reference in new issue
Block a user