fix(abut): 날개벽·헌치·접속슬래브가 벽체와 흉벽 안으로 들어가지 않도록

- 날개벽: 벽체 배면(t −0.8) 뒤로만 세움. 벽체·흉벽 앞쪽 부분은 잘라냄 (프로파일을 dM ≥ 벽체 배면 위치로 자름)
- 위 헌치: 브라켓 상면이 s 방향으로 기울므로, 헌치 면적 안에서 가장 높은 브라켓 상면 위에 놓음
- 접속슬래브: 흉벽 배면 단차 위(t ≥ 벽체 배면)는 브라켓 상면에 평평하게 얹고, 벽체 뒤쪽에서만 4 % 하향
- 테스트: 날개벽 t ≤ −0.8, 벽체 배면 위치, 위 헌치와 슬래브가 배면 단차 아래로 내려가지 않음. 전체 638건 통과, 타입 검사·빌드 통과. 브라우저 시각 확인은 미실시

Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>

tests/abut-blocks-slab.test.ts

@@ -68,4 +68,29 @@ describe('교대 3D: 받침블럭과 접속슬래브 (spec §4.2, §4.8)', () =>
     const backs = (named('wall') as THREE.Group).children.map((w) => new THREE.Box3().setFromObject(w).min.z);
     expect(Math.min(...backs)).toBeCloseTo(members.shape.wallBackM, 6);
   });
+
+  it('the 날개벽 stays behind the 벽체 back face, so it does not enter the 벽체 or the 흉벽', () => {
+    // All 벽체 and 흉벽 parts lie at t ≥ 벽체 배면 (−0.8). A wing vertex with t ≤ −0.8 therefore has no volume in common with them.
+    const z = (g: THREE.Object3D) => {
+      const pos = (g as THREE.Mesh).geometry.getAttribute('position');
+      let max = -Infinity;
+      for (let i = 0; i < pos.count; i++) max = Math.max(max, pos.getZ(i));
+      return max;
+    };
+    for (const w of (named('wings') as THREE.Group).children) expect(z(w)).toBeLessThanOrEqual(members.shape.wallBackM + 1e-6);
+    for (const w of (named('wall') as THREE.Group).children) expect(new THREE.Box3().setFromObject(w).min.z).toBeGreaterThanOrEqual(members.shape.wallBackM - 1e-6);
+  });
+
+  it('the upper 헌치 and the 접속슬래브 stay on the 브라켓 상면 over the back strip, not in it', () => {
+    const backTop = (s: number) => members.parapetTopStartEl + ((members.parapetTopEndEl - members.parapetTopStartEl) * s) / model.length - members.shape.bracketHeightM;
+    for (const h of (named('haunches') as THREE.Group).children) {
+      const b = new THREE.Box3().setFromObject(h);
+      if (b.max.z < members.shape.parapetBackM + 1e-6) continue; // lower 헌치, behind the 벽체
+      expect(b.min.y).toBeGreaterThanOrEqual(Math.max(backTop(b.min.x), backTop(b.max.x)) - 1e-6);
+    }
+    const pos = ((named('slab') as THREE.Group).children[0] as THREE.Mesh).geometry.getAttribute('position');
+    for (let i = 0; i < pos.count; i++) {
+      if (pos.getZ(i) >= members.shape.wallBackM) expect(pos.getY(i)).toBeGreaterThanOrEqual(backTop(pos.getX(i)) - 1e-6);
+    }
+  });
 });

tests/abut-wings.test.ts

@@ -126,9 +126,11 @@ describe('교대 날개벽 하단 선 · 헌치 (AA3c, spec_abut §4.7)', () =>
 
   it('upper haunch runs from the bracket top (흉벽 상단 − 0.85) to the wing top; lower from the footing top to the bracket top', () => {
     const [up, low] = a2Left.haunches;
-    expect(up.zBottomEl).toBeCloseTo(46.838 - 0.85, 2);
+    // The upper haunch rests on the highest point of the 브라켓 top over its footprint (the top falls along s), never below it.
+    expect(up.zBottomEl).toBeGreaterThanOrEqual(46.838 - 0.85 - 1e-6);
+    expect(up.zBottomEl).toBeLessThan(46.838 - 0.85 + 0.05);
     expect(low.zBottomEl).toBeCloseTo(41.995, 3);
-    expect(low.zTopEl).toBeCloseTo(up.zBottomEl, 6);
+    expect(low.zTopEl).toBeCloseTo(46.838 - 0.85, 2);
     expect(up.zTopEl).toBeGreaterThan(up.zBottomEl);
   });
 });