ypshimandClaude Haiku 5.5 cf8410e450 feat(rebar): 길이 단면의 주철근 B5–B8을 굵게 표시하고 양끝 다리를 그림 ...

- B5–B8 선 굵기 2, B5 양끝 아래, B6·B7 양끝 위, B8 직선 (확대기초철근 (1).md §6)
- 테스트: 다리 6개 확인

Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>

2026-10-27 13:58:27 +09:00

..

backup.ts

feat(view): project save/open, Ctrl+S, save status, IndexedDB auto-backup (plan B2–B5)

2026-10-22 09:44:49 +09:00

bearing-plan-svg.ts

feat(bearing): show each bearing's 방위 in the plan and turn the overlays with it

2026-10-26 13:24:20 +09:00

bearing-section-svg.ts

feat(bearing): section and solplate detail drawings with the drawing values overlaid (승인 2026-10-26)

2026-10-26 12:33:05 +09:00

block-rebar-plan-svg.ts

fix(rebar): S1 layout dimensions on the outer side of each block in the plan

2026-10-26 14:22:00 +09:00

block-rebar-svg.ts

fix(rebar): cut the C–C section through the selected pair only

2026-10-26 14:14:31 +09:00

column-elevation-svg.ts

feat(rebar): 기둥 정면 삽도 (P 번호, 단부 배치구간·기초 안 깊이 계산값 표시)

2026-10-26 16:37:36 +09:00

column-section-svg.ts

feat(rebar): 단면 삽도 순서 P3·P4·P5, 치수선·규격 표기·커플러 지시선

2026-10-26 16:54:27 +09:00

coping-rebar-svg.ts

feat(rebar): 단면·폐합 at two fixed stations side by side (단부 0.3 m, first column centre)

2026-10-26 15:15:47 +09:00

footing-section-l-svg.ts

feat(rebar): 길이 단면의 주철근 B5–B8을 굵게 표시하고 양끝 다리를 그림

2026-10-27 13:58:27 +09:00

footing-section-svg.ts

Revert "feat(rebar): 확대기초 단면 그림에서 B1–B4와 B10-1 제외"

2026-10-27 11:21:07 +09:00

footing-svg.ts

feat(view): dimension lines on the plan — overall length and width, and the pile chains (끝단 거리 700, 간격 2250)

2026-10-23 16:15:39 +09:00

ground-svg.ts

feat(ground): 해상 selectable with MSL levels, 고조위·저조위, and checks

2026-10-26 11:11:31 +09:00

rebar3d.ts

Reapply "feat(rebar): B1–B4와 B5–B8 방향 교환 (B1–B4는 W 방향, B5–B8은 L 방향)"

2026-10-27 09:51:04 +09:00

scene.ts

feat(bearing): 일체 block as one stepped block per pair, with its rebar (승인 2026-10-26)

2026-10-26 12:02:33 +09:00

solplate-svg.ts

feat(bearing): section and solplate detail drawings with the drawing values overlaid (승인 2026-10-26)

2026-10-26 12:33:05 +09:00

terrain.ts

feat(ground): draw the terrain grid around the piers in the 3D view

2026-10-23 17:57:30 +09:00