ypshimandClaude Haiku 5.5
b3a62850ab
- C4·C5 measured across the coping width (교각축 직각): the two coping edges at ±B/2 to the bearing centre. The former along-the-axis definition is replaced. - view/bearing-plan-svg.ts: the plan of one pair with the model's solplates and the block outline(s) (일체: one 2500 × 1200; 분리: two 1200 × 1200), and the drawing A/B overlaid as dashed outlines. - ② bearing card: 상세 보기 pair chips (①·⑥ …) and the overlay toggle. Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
78 lines
3.5 KiB
TypeScript
78 lines
3.5 KiB
TypeScript
import { describe, expect, it } from 'vitest';
|
|
import { buildPier, type BlockModel } from '../src/core/geometry';
|
|
import { bearingEdgeDistances, integratedCheck, PAIR_ECCENTRICITY_LIMIT_MM, pairEccentricities } from '../src/core/bearing-layout';
|
|
import { validatePier } from '../src/core/validate';
|
|
import type { Issue } from '../src/core/types';
|
|
import { loadP1 } from './helpers';
|
|
|
|
const model = buildPier(loadP1());
|
|
|
|
function block(no: number, row: '전열' | '후열', s: number): BlockModel {
|
|
return { no, row, s, n: 0, k: 0, g: 0, bottom: 0, top: 0, padTop: 0, rowSkewDeg: 0 } as BlockModel;
|
|
}
|
|
|
|
describe('받침 배치 규칙 (승인 2026-10-26)', () => {
|
|
it('C4 and C5 from the model: distances from the two coping edges across the width (교각축 직각), P1 front 852 / 2248', () => {
|
|
const d = bearingEdgeDistances(model);
|
|
expect(d).toHaveLength(10);
|
|
const first = d.find((x) => x.no === 1 && x.row === '전열')!;
|
|
expect(first.leftMm).toBeCloseTo(852, 0);
|
|
expect(first.rightMm).toBeCloseTo(2248, 0);
|
|
// the two edges are one coping width (3100) apart
|
|
for (const x of d) expect(x.leftMm + x.rightMm).toBeCloseTo(3100, 6);
|
|
});
|
|
|
|
it('the front and back bearings of one number are about 85 mm apart on P1, so 일체 is allowed', () => {
|
|
const pairs = pairEccentricities(model.blocks);
|
|
expect(pairs).toHaveLength(5);
|
|
for (const p of pairs) {
|
|
expect(p.eccentricityMm).toBeGreaterThan(80);
|
|
expect(p.eccentricityMm).toBeLessThan(90);
|
|
expect(p.allowed).toBe(true);
|
|
}
|
|
});
|
|
|
|
it('an eccentricity above 100 mm forbids 일체 for that pair (분리 우선)', () => {
|
|
expect(PAIR_ECCENTRICITY_LIMIT_MM).toBe(100);
|
|
const pairs = pairEccentricities([block(1, '전열', 1.0), block(1, '후열', 1.12), block(2, '전열', 3), block(2, '후열', 3.09)]);
|
|
expect(pairs.find((p) => p.frontNo === 1)!.allowed).toBe(false);
|
|
expect(pairs.find((p) => p.frontNo === 2)!.allowed).toBe(true);
|
|
});
|
|
|
|
it('pairs by order within each row, so 전열 1 pairs with 후열 6 on P1 (numbers run on across the rows)', () => {
|
|
const pairs = pairEccentricities(model.blocks);
|
|
expect(pairs[0]).toMatchObject({ frontNo: 1, backNo: 6 });
|
|
});
|
|
|
|
it('a bearing left without a partner (the rows have different counts) is not paired', () => {
|
|
expect(pairEccentricities([block(1, '전열', 1), block(2, '전열', 3), block(6, '후열', 1.05)])).toHaveLength(1);
|
|
});
|
|
});
|
|
|
|
describe('일체 배치 선택 (승인 2026-10-26)', () => {
|
|
it('P1 allows 일체 because every pair is within 100 mm', () => {
|
|
expect(integratedCheck(model.blocks)).toEqual({ allowed: true, overLimit: [] });
|
|
});
|
|
|
|
it('one pair over the limit blocks 일체 and lists that pair', () => {
|
|
const r = integratedCheck([block(1, '전열', 1.0), block(1, '후열', 1.12)]);
|
|
expect(r.allowed).toBe(false);
|
|
expect(r.overLimit.map((p) => p.frontNo)).toEqual([1]);
|
|
});
|
|
|
|
it('no pairs at all does not allow 일체', () => {
|
|
expect(integratedCheck([]).allowed).toBe(false);
|
|
});
|
|
|
|
it('the model keeps 분리 for now and says so (B01); a 일체 that is not allowed is refused with B02', () => {
|
|
const input = loadP1();
|
|
const ok: Issue[] = [];
|
|
validatePier({ ...input, bearingLayout: '일체' }, model, ok);
|
|
expect(ok.map((i) => i.code)).toContain('B01');
|
|
const bad: Issue[] = [];
|
|
const fake = { ...model, blocks: [block(1, '전열', 1.0), block(1, '후열', 1.12)] } as unknown as typeof model;
|
|
validatePier({ ...input, bearingLayout: '일체' }, fake, bad);
|
|
expect(bad.map((i) => i.code)).toContain('B02');
|
|
});
|
|
});
|