Pier_v1/src/core/validate.ts

import { DIM, type PierModel } from './geometry';
import type { Issue, PierInput, PierType } from './types';

const EXPECTED_COLUMNS: Record<PierType, number> = { 'T형': 1, '2주형': 2, '3주형': 3 };

/** Rules from spec §10 that are not implemented in this stage. Shown to the user, never silently skipped. */
export const NOT_IMPLEMENTED_RULES = [
  'I02 fck·fy가 기본값(가정) 그대로 (③ 배근 단계, 3단계)',
  'W06 속성 복사 건너뜀 (2단계)',
  'W08 솔플레이트 T1−T2 검사 (2단계)',
] as const;

/** Input-level checks (spec §10 E01, E02). Returns false when the pier must not be built. */
export function validateInput(input: PierInput, issues: Issue[]): boolean {
  let ok = true;
  if (input.columnCount !== EXPECTED_COLUMNS[input.type]) {
    issues.push({
      code: 'E01',
      level: 'E',
      pier: input.name,
      message: `교각형식 ${input.type}과 기둥갯수 ${input.columnCount}개가 맞지 않습니다. 기둥 ${EXPECTED_COLUMNS[input.type]}개로 맞추세요.`,
    });
    ok = false;
  }
  const front = input.bearings.filter((b) => b.row === '전열').length;
  const back = input.bearings.filter((b) => b.row === '후열').length;
  if (front !== back) {
    issues.push({ code: 'E02', level: 'E', pier: input.name, message: `전열 받침 ${front}개, 후열 받침 ${back}개로 수가 다릅니다.` });
    ok = false;
  }
  return ok;
}

/** Geometry-level checks (spec §10 W01–W05, W07, I01) on a built model. */
export function validatePier(input: PierInput, model: PierModel, issues: Issue[]): void {
  const ip2Gap = Math.hypot(model.ip2Input.e - model.ip2Calc.e, model.ip2Input.n - model.ip2Calc.n);
  if (ip2Gap > 0.001) {
    issues.push({
      code: 'W01',
      level: 'W',
      pier: input.name,
      message: `IP2 입력과 재계산값이 ${(ip2Gap * 1000).toFixed(1)} mm 다릅니다. 재계산값을 사용합니다.`,
    });
  }
  const minBlock = Math.min(model.derived.blockHeightFront, model.derived.blockHeightBack);
  if (minBlock <= 0) {
    issues.push({ code: 'W02', level: 'W', pier: input.name, message: '받침블럭 콘크리트 높이가 0 이하입니다. 블럭을 생략합니다.' });
  }
  // W03: bearing centre closer than half a block width to a step boundary (interior boundaries only).
  const halfBlock = DIM.blockSize / 2;
  const stepBounds = model.segments.slice(1).map((seg) => seg.s0);
  for (const b of model.bearings) {
    const nearest = Math.min(...stepBounds.map((s) => Math.abs(b.g - s)));
    if (nearest < halfBlock) {
      issues.push({
        code: 'W03',
        level: 'W',
        pier: input.name,
        message: `${b.row} 받침 ${b.no}번 중심이 계단 경계에서 ${(nearest * 1000).toFixed(0)} mm 떨어져 블럭 폭의 절반(${(halfBlock * 1000).toFixed(0)} mm)보다 가깝습니다.`,
      });
    }
  }
  // W04: block footprint extends beyond the coping plan (s in [0, L], n in [−B/2, B/2]).
  const planHalfB = model.copingB / 2;
  const outside = model.blocks.some(
    (b) =>
      b.g - halfBlock < 0 ||
      b.g + halfBlock > model.copingL ||
      b.n - halfBlock < -planHalfB ||
      b.n + halfBlock > planHalfB,
  );
  if (outside) {
    issues.push({ code: 'W04', level: 'W', pier: input.name, message: '받침블럭이 코핑 평면 밖으로 나갑니다.' });
  }
  if (input.foundationType !== '현장타설말뚝' && model.footings.some((f) => f.top > input.groundEl)) {
    issues.push({ code: 'W05', level: 'W', pier: input.name, message: '확대기초 상면이 지반고보다 높습니다.' });
  }
  if (model.derived.frontBackDiffSpread > DIM.lateralTolerance) {
    issues.push({ code: 'W07', level: 'I', pier: input.name, message: '전열·후열 EL 차이가 받침마다 다릅니다 (정보).' });
  }
  // I01: block concrete below cover + bar diameter (cover 100 mm, S1·S2 H19 from spec §6.3).
  const cover = 0.1;
  const barDia = 0.019;
  if (minBlock < cover + barDia) {
    issues.push({
      code: 'I01',
      level: 'I',
      pier: input.name,
      message: `받침블럭 높이 ${(minBlock * 1000).toFixed(0)} mm가 피복 + 철근 지름(${((cover + barDia) * 1000).toFixed(0)} mm)보다 작습니다. 블럭 철근은 코핑 안에 묻힙니다.`,
    });
  }
}