import { hookLength, NOMINAL_DIAMETER, type BarSize } from './common';

/**
 * 확대기초 철근 B1–B8, B10–B12 (plan C5). Source: RAG/확대기초철근 (1).md, 2026-10-22 최종 정리.
 * B9 (전단철근) is not computed yet. Lengths in mm, heights in mm from the 확대기초 하면.
 */
export const FOOTING_DEFAULTS = {
  /** 피복 상면 / 측면 / 하면 (최외측 철근 중심까지). */
  cTop: 100,
  cSide: 100,
  cBottom: 150,
  /** 첫 철근 최소 여유. */
  eMin: 150,
  /** 격자 실간격 s. */
  s: 125,
  /** 하면 1단과 2단의 간격 Δ_2. */
  delta2: 100,
  /** B10 높이 간격 s_v and 조립 단 배수 n. */
  sV: 200,
  n: 2,
  /** B1·B3 leg and B5·B7 leg (proposed values; Q-B5 open). */
  legB1: 300,
  legB3: 230,
  legB5: 343,
  legB7: 230,
} as const;

export interface GridResult {
  /** 격자 칸 수 n = floor((A − 2·e_min)/s); 위치 수 = n + 1. */
  n: number;
  /** 격자 길이 G = n·s. */
  G: number;
  /** 양끝 여유 e = (A − G)/2. */
  e: number;
  /** 위치 수 n + 1. */
  positions: number;
}

/** Grid along one side of the footing (§3.1). side = W for B1–B4, L for B5–B8. */
export function grid(side: number, s: number = FOOTING_DEFAULTS.s, cSide: number = FOOTING_DEFAULTS.cSide, eMin: number = FOOTING_DEFAULTS.eMin): GridResult {
  const A = side - 2 * cSide;
  const n = Math.floor((A - 2 * eMin) / s);
  const G = n * s;
  const e = (A - G) / 2;
  return { n, G, e, positions: n + 1 };
}

const d = (size: BarSize) => NOMINAL_DIAMETER[size];

/** Layer heights (§4.2), mm from the 하면. H = footing height. */
export interface Layers {
  B5: number;
  B1: number;
  B24: number;
  B68: number;
  B3: number;
  B7: number;
}

export function layers(H: number): Layers {
  const { cTop, cBottom, delta2 } = FOOTING_DEFAULTS;
  const zB5 = H - cTop;
  const zB1 = zB5 - (d('S29') + d('S25')) / 2;
  const zB24 = cBottom;
  const zB68 = cBottom + (d('S25') + d('S29')) / 2;
  return { B5: zB5, B1: zB1, B24: zB24, B68: zB68, B3: zB24 + delta2, B7: zB68 + delta2 };
}

/** Lengths of the B1–B4 family along the length L (§5.2). */
export function legB2(H: number): number {
  const z = layers(H);
  return z.B1 - z.B24; // 1723 at H 2000
}

export interface FootingBar {
  name: 'B1' | 'B2' | 'B3' | 'B4' | 'B5' | 'B6' | 'B7' | 'B8' | 'B10-1' | 'B10-2' | 'B11' | 'B12';
  size: BarSize;
  /** Bars in all (over the footing). */
  count: number;
  /** Length of one bar, mm (straight part + legs). */
  length: number;
}

/** B1–B4 (§5): the grid along W, with lengths from L. */
export function bottomBars(L: number, W: number, H: number): FootingBar[] {
  const g = grid(W);
  const n = g.positions;
  const N4 = Math.ceil(n / 2); // B4 at even i
  const N2 = Math.floor(n / 2); // B2 at odd i
  const l0 = L - 2 * FOOTING_DEFAULTS.cSide;
  const leg2 = legB2(H);
  return [
    { name: 'B1', size: 'S25', count: N2, length: l0 + 2 * FOOTING_DEFAULTS.legB1 },
    { name: 'B2', size: 'S25', count: N2, length: l0 + 2 * leg2 },
    { name: 'B3', size: 'S19', count: N2, length: l0 + 2 * FOOTING_DEFAULTS.legB3 },
    { name: 'B4', size: 'S25', count: N4, length: l0 },
  ];
}

/** B5–B8 (§6): the grid along L, with lengths from W. */
export function crossBars(L: number, W: number, H: number): FootingBar[] {
  const g = grid(L);
  const n = g.positions;
  const N8 = Math.ceil(n / 2); // B8 at even i
  const N6 = Math.floor(n / 2); // B6, B5, B7 at odd i
  const l0 = W - 2 * FOOTING_DEFAULTS.cSide;
  const z = layers(H);
  const leg6 = z.B5 - z.B68;
  return [
    { name: 'B5', size: 'S29', count: N6, length: l0 + 2 * FOOTING_DEFAULTS.legB5 },
    { name: 'B6', size: 'S29', count: N6, length: l0 + 2 * leg6 },
    { name: 'B7', size: 'S19', count: N6, length: l0 + 2 * FOOTING_DEFAULTS.legB7 },
    { name: 'B8', size: 'S29', count: N8, length: l0 },
  ];
}

/** B10-1 (on W sides) and B10-2 (on L sides): m + 1 levels at s_v, two faces each (§7). */
export function sideBars(L: number, W: number): FootingBar[] {
  const depth1 = 123.85; // B10-1 depth from the side
  const depth2 = 122.25; // B10-2 depth from the side
  const levels = 9; // 8 @ 200 (기본)
  const hook = hookLength('main90', d('S19'));
  return [
    { name: 'B10-1', size: 'S19', count: levels * 2, length: L - 2 * depth2 + 2 * hook },
    { name: 'B10-2', size: 'S19', count: levels * 2, length: W - 2 * depth1 + 2 * hookLength('main90', d('S19')) },
  ];
}

/** B11 (along W, between the B10-2 levels) and B12 (along L), 4s apart with a 2s stagger per level (§8). */
export function assemblyBars(L: number, W: number): FootingBar[] {
  const levelsJ = [2, 4, 6]; // j = n, 2n, 3n … inside the B10 levels (n = 2)
  const perLevel = (n: number, startOdd: number, startEven: number) =>
    levelsJ.map((_, idx) => {
      const i0 = idx % 2 === 0 ? startOdd : startEven;
      return Math.floor((n - i0) / 4) + 1;
    });
  const nW = grid(W).positions - 1; // 61
  const nL = grid(L).positions - 1; // 79
  // B11 is spread along L (n = 79) and B12 along W (n = 61); each level has its own count.
  const b11 = perLevel(nL, 0, 2).reduce((a, b) => a + b, 0);
  const b12 = perLevel(nW, 0, 2).reduce((a, b) => a + b, 0);
  const hook = hookLength('main90', d('S16'));
  return [
    { name: 'B11', size: 'S16', count: b11, length: W - 2 * 141.35 + 2 * hook },
    { name: 'B12', size: 'S16', count: b12, length: L - 2 * 139.75 + 2 * hook },
  ];
}

/**
 * B9 전단철근 (확대기초철근 (1).md §9). Wraps B5 (top outer) and B2·B4 (bottom outer), H16 @500 staggered.
 * Plane positions and hooks are proposed rules (Q-B18, Q-B19).
 */
export function shearB9(L: number, W: number, H: number): { rows: number; perRow: number[]; count: number; length: number } {
  const nW = grid(W).n; // 61
  const nL = grid(L).n; // 79
  const rowIndices: number[] = [];
  for (let i = 1; i <= nW; i += 4) rowIndices.push(i);
  // Even-numbered rows start at i_L = 1, odd-numbered rows at i_L = 3 (2s stagger).
  const perRow = rowIndices.map((_, r) => {
    const start = r % 2 === 0 ? 1 : 3;
    return Math.floor((nL - start) / 4) + 1;
  });
  const count = perRow.reduce((a, b) => a + b, 0);
  const lv = layers(H).B5 - layers(H).B24; // 1750
  const lh = hookLength('stirrup135', d('H16'));
  return { rows: rowIndices.length, perRow, count, length: lv + 2 * lh };
}

/** Leg offsets from the grid line (§5.3, §6.3): the B1/B3 and B5/B7 legs sit beside the outer leg. */
export function legOffsets(): { B1: number; B3: number; B5: number; B7: number } {
  const dB2 = NOMINAL_DIAMETER.S25;
  const dB1 = NOMINAL_DIAMETER.S25;
  const dB3 = NOMINAL_DIAMETER.S19;
  const dB6 = NOMINAL_DIAMETER.S29;
  const dB5 = NOMINAL_DIAMETER.S29;
  const dB7 = NOMINAL_DIAMETER.S19;
  return {
    B1: (dB2 + dB1) / 2,
    B3: (dB2 + dB3) / 2,
    B5: (dB6 + dB5) / 2,
    B7: (dB6 + dB7) / 2,
  };
}

/** B11/B12 heights (§8.1): B10 levels at 150 + k·s_v; the assembly levels are j = n, 2n, 3n (n = 2), and B12 sits d_B10 above B11. */
export function assemblyHeights(): { B11: number[]; B12: number[] } {
  const { cBottom } = FOOTING_DEFAULTS;
  const sV = FOOTING_DEFAULTS.sV;
  const n = FOOTING_DEFAULTS.n;
  const js = [n, 2 * n, 3 * n];
  const B11 = js.map((j) => cBottom + j * sV);
  const B12 = B11.map((z) => z + NOMINAL_DIAMETER.S19);
  return { B11, B12 };
}