/**
 * 코핑 철근 (plan C3). Source: RAG/코핑철근.md, 2026-10-22 최종 정리 (spec §6.4 is older and is not used here).
 * Positions are along the coping length from its start, in mm.
 */
export const COPING_REBAR = {
  /** 피복 (최외측 철근 중심까지). */
  cover: 100,
  /** 첫 전단철근 최소 여유 e_add. 끝 여유 e_min = cover + e_add = 300. */
  eAdd: 200,
  /** Level 폭 W_L. */
  levelWidth: 2100,
  /** C10 간격 s_L (기둥 중심부터). */
  spacingL: 300,
  /** C9·C11 간격 s_s (C10에서 바깥으로). */
  spacingS: 250,
  /** C12·C13 측면 수평 간격. */
  spacingSide: 250,
  /** C14 위 2줄 간격 / 아래 줄 수평 간격 / 아래 줄 연직 간격 / 끝 여유. */
  c14: { upperSpacing: 1000, lowerSpacing: 2000, verticalSpacing: 500, endGap: 500 },
} as const;

export const COPING_END_GAP = COPING_REBAR.cover + COPING_REBAR.eAdd;

export interface ShearBars {
  /** C10 positions (mm), from the first to the last. */
  c10: number[];
  /** C9 positions (mm), from the left end toward the column. */
  c9: number[];
  /** C11 positions (mm), from the column toward the right end. */
  c11: number[];
  /** Distance from the coping end to the outermost C9 / C11 bar (mm). */
  endGap: number;
}

/**
 * Shear bars C9–C11 along the axis (코핑철근.md §3). A single column at the coping centre.
 * C10: @300 from the column centre, out to the first position beyond the Level edge (k_max).
 * C9 / C11: @250 outward from the outermost C10, as many as fit with the end gap of at least 300.
 */
export function shearBars(coping: number, xc = coping / 2): ShearBars {
  const { spacingL, spacingS, levelWidth } = COPING_REBAR;
  const kMax = Math.floor(levelWidth / 2 / spacingL) + 1;
  const c10 = Array.from({ length: 2 * kMax + 1 }, (_, i) => Math.round(xc + (i - kMax) * spacingL));
  const left = c10[0];
  const right = c10[c10.length - 1];
  const n9 = Math.floor((left - COPING_END_GAP) / spacingS);
  if (n9 < 0) {
    throw new Error('RB-K01: C10 바깥 구간이 끝 여유보다 짧아 C9를 놓을 수 없습니다.');
  }
  const c9 = Array.from({ length: n9 }, (_, j) => Math.round(left - (n9 - j) * spacingS));
  const c11 = Array.from({ length: n9 }, (_, j) => Math.round(right + (j + 1) * spacingS));
  const endGap = Math.min(left - c9[0], coping - c11[c11.length - 1]);
  return { c10, c9, c11, endGap: endGap };
}

/**
 * Side horizontal bars (코핑철근.md §6): seven rows from the bottom at 250 mm.
 * Rows below the sloped-bottom break (z_7,end) are C12, the rows at and above it are C13.
 */
export function sideRows(zBottom: number, zBreak: number, rows = 7): { c12: number[]; c13: number[] } {
  const z = Array.from({ length: rows }, (_, i) => Math.round((zBottom + i * COPING_REBAR.spacingSide / 1000) * 1000) / 1000);
  return { c12: z.filter((v) => v < zBreak - 1e-9), c13: z.filter((v) => v >= zBreak - 1e-9) };
}

/** C14 counts (코핑철근.md §8): 2 upper lines of 11 plus the lower rows 5 / 6 / 3 / 2 = 38. */
export const C14_COUNTS = { upperLines: 2, upperPerLine: 11, lower: [5, 6, 3, 2] as const };

export function c14Total(): number {
  return C14_COUNTS.upperLines * C14_COUNTS.upperPerLine + C14_COUNTS.lower.reduce((a, b) => a + b, 0);
}

/** C15 (거꾸로 된 U, 가장 높은 계단) and C16 (L형, 2구간) counts (코핑철근.md §7). */
export const STEP_BAR_COUNTS = { C15: 11, C16: 22 } as const;

/**
 * C9·C10 lower U length (코핑철근.md §4.3): 1740 + 2h. h rises linearly along the slope between the document's
 * ends (x 300 → h 890.9, x 4550 → h 2178.8) and stays at the Level height 2300 from the Level edge (4950) on.
 * The bar's upper cap (삿갓) length depends on l_cap, which is still open (Q-K5), so only the U is given here.
 */
export const SHEAR_U = { x0: 300, h0: 890.9, x1: 4550, h1: 2178.8, levelH: 2300, levelEdgeFromCentre: 1050, flat: 1740 } as const;

export function shearUHeight(x: number, coping: number): number {
  const xs = Math.min(x, coping - x); // mirror to the left half
  const slope = (SHEAR_U.h1 - SHEAR_U.h0) / (SHEAR_U.x1 - SHEAR_U.x0);
  const h = SHEAR_U.h0 + (xs - SHEAR_U.x0) * slope;
  return Math.min(h, SHEAR_U.levelH);
}

export function shearULength(x: number, coping: number): number {
  return SHEAR_U.flat + 2 * shearUHeight(x, coping);
}

/** C12 straight lengths per row (코핑철근.md §6 table, mm) and C13. */
export const SIDE_LENGTHS = { C12: [3717, 5333, 6950, 8567, 10183], C13: 11746 } as const;

/** C15 (거꾸로 된 U, 3852) and C16 (L형, 4070 / 4069) lengths, mm (코핑철근.md §7). */
export const STEP_LENGTHS = { C15: 3852, C16: [4070, 4069] as const, C14: 3447.5 } as const;

/**
 * 삿갓 (upper cap) of C9–C11 (코핑철근.md §4.3). l_cap is open (Q-K5); recommended here: l_cap = h − c (top cover 100),
 * so that l_cap stays below h (RB-K04). Cap length = 1740 + 2·l_cap.
 */
export const CAP = { flat: 1740, cover: 100 } as const;

export function capLength(x: number, coping: number): number {
  const h = shearUHeight(x, coping);
  const lCap = h - CAP.cover;
  return CAP.flat + 2 * lCap;
}

/** Pieces per position: 3 closed stirrups × (U + cap) = 6. Total 270 for C9 + C10 + C11 (document). */
export const PIECES_PER_POSITION = 6;

/**
 * 전단철근 구간 표 (시안 ③ · 코핑): C9 / C10 / C11 grouped by segment, from the bar positions.
 * Positions are along the coping length (mm); the table shows the first and last bar of each segment.
 */
export function shearSegments(coping: number): { segment: string; from: number; to: number; spacing: number; count: number; bar: 'C9' | 'C10' | 'C11' }[] {
  const b = shearBars(coping);
  const seg = (name: string, xs: number[], bar: 'C9' | 'C10' | 'C11', spacing: number) => ({
    segment: name,
    from: Math.min(...xs),
    to: Math.max(...xs),
    spacing,
    count: xs.length,
    bar,
  });
  return [
    seg('좌 경사', b.c9, 'C9', COPING_REBAR.spacingS),
    seg('Level', b.c10, 'C10', COPING_REBAR.spacingL),
    seg('우 경사', b.c11, 'C11', COPING_REBAR.spacingS),
  ];
}