- The station input is removed. The section shows the 단부 (first shear
station, from the 3D bar records) and the first column centre, side by side.
- The 상면 간격 label is removed.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Other bars (C9–C11, C14–C16) are left out of the section; bubbles only for C1–6, C7·8, C12·13.
- The top-row chain carries the label 상면 간격.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Top row (C1–C8) spacing along the 교축 from chainDims, between the coping's
two long edges (±B/2).
- Side rows (C12·C13) along the EL, from the coping top EL down to the lowest
side bar.
- One bubble per bar group cut at the station, with a leader to its bars.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- The chain is computed from the column centre (0) and is now drawn at the
column's position on the coping (x = column s), so the 0 sits on the column.
- P1: the 10@1000 span runs from 1000 to 11000 mm, centred on the column at 6000 mm.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- The two chains are raised and their labels enlarged (220 mm).
- 코핑 길이 sits above both chains; 기둥 중심 has its own line between them.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- chainDims groups the repeated gaps (n@pitch = total) and writes a single gap as its length.
- Top chain: the 전단·띠 stations (C9 @250, C10 @300) from the coping ends.
- Lower chain: the upper C14 bars measured from the column centre (0), so
the 10@1000 span starts at the column centre.
- Stations are the lowest s of their pieces; pieces within 160 mm are one station.
- P1 gives the 시안 values: 300 · 18@250=4500 · 8@300=2400 · 18@250=4500 · 300 and
900 · 10@1000=10000 · 900.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- The column-centre line 900 · 10@1000=10000 (기둥 중심부터) · 900, from the
design values, under the first dimension.
- A legend of the bar groups and their colours under the drawing.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Nine bubbles (C1–6, C12·13, C9, C10, C11, C7·8, C14, C15, C16), each with a
leader to the middle of its bars.
- The top dimension 300 · 18@250=4500 · 8@300=2400 · 18@250=4500 · 300, drawn
only when it adds up to the coping length.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- The coping section listed every piece of a bar as its own crossing, so the
same spot and name were drawn many times. Each spot is drawn once and each
bar name is written once.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- rebar3d records every bar (name, stretch, local points, diameter) next to its
mesh, so the 2D drawings use the same data as the 3D view.
- view/coping-rebar-svg.ts: the 정면 (along the coping length, EL vertical) and
the 단면·폐합 at a chosen station (the bars crossing it, C9–C11 loops included).
- ③ coping tab: 정면 / 단면·폐합 toggle and the station input.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
