- PierInput.blockRebar (partial): cover top, side cover, first gap, spacing S1
and S2 (separate), leg length. Defaults are the P1 values, so P1 is unchanged.
- S2 depth = top cover; S1 depth = top cover + S1/2 + S2/2 (H19: 69.1 at the default).
- The model carries the settings; the bearing-block rebar, the 3D bars, and the
summary use them.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- integrated-block.ts: per pair (전열 k · 후열 k) one block centred on the
pair midpoint, 2500 across the 교축 and 1200 along the 교각축, with a
stepped top (each half to its own bearing row top). Only when 일체 is chosen
and every pair is within 100 mm; otherwise 분리 is kept (B02).
- Rebar: S2 19 bars at 125 across the 2500 (10 front half, 9 back half), each
leg from its half's top; S1 8 bars across the 1200, 3800 long, depth from
the lower top. Totals per pier: S1 40, S2 95 (분리: 80 / 80).
- Scene and 3D rebar draw the stepped blocks instead of the per-bearing blocks.
- The per-bearing blocks stay for the solplate, the pads, and the body.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Drawing check (spec §6.3): an integrated 2500 × 1200 block gives 18@125 = 2250
along (ends 50 + 75) and 7@125 = 875 across (ends 162.5).
- C3 coping rebar, from RAG/코핑철근.md (2026-10-22 final):
- C10: 9 bars @300 at 4800–7200 (k_max 4, beyond the Level edge).
- C9 / C11: 18 bars each @250 outward, ends at 300 and 11700 (end gap 300).
- Refuses a coping too short for C9 (RB-K01).
- Side bars C12 5 rows / C13 2 rows at the 42.538 break; C14 38 bars;
C15 11 bars, C16 22 bars.
- spec §6.4 is older than 코핑철근.md (C10/C9/C11 layout, C12 row count, C14
dimensions). This follows the final document; spec §6.4 needs an update.
- Not yet: C1–C8 main bars (shape and lengths), the C12/C13 bar lengths and
shapes, the drawing check of the coping sheet, and the ③ screen.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- C1: development length l_d = 0.6·d_b·fy/(λ√fck), splice 1.3·l_d, standard
hooks (main 90°, tie 90°, stirrup 135° as written in the spec). fck 27 and
fy 400/500 are marked as assumed values (I02).
- C2: bearing-block bars, one block per bearing (배치 분리). Bars S1 and S2 at
@125 with 8 bars per 1200 mm side (7 gaps = 875, ends 162.5), 2500 mm long,
coping embedment from the block height (pad included, Q16 결정).
- Tests: development and splice lengths; hook table limits; embedment 600 /
550 / 619.1 / 569.1; P1 has 80 bars each of S1 and S2 over 10 blocks.
- Not yet: the ③ screen and the drawing check against the bearing-block drawing.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
