Sprint 36~39 — IFC Alignment/Camber + proc-macro 스캐폴딩 + 변단면 거더

## Sprint 36: IfcAlignment (IFC Phase 3b)
- write_straight_alignment(): 직선 horizontal(.LINE.) + 평지
  vertical(.CONSTANTGRADIENT.) 세그먼트 + IfcRelNests 계층.
- IfcAlignmentSegment × IfcAlignmentHorizontalSegment × IfcAlignmentVerticalSegment.
- Site aggregate 에 Bridge 와 Alignment 동시 포함.

## Sprint 37: IFC 거더 Camber 반영
- BridgeExportParams.camber_mid_mm 추가.
- camber > 0 일 때: 거더 1 개를 CAMBER_SEGMENTS(10) 세그먼트로 분할, 각 세그먼트
  Y 에 포물선 값 적용 → 곡선 거더 근사. Pset 는 첫 세그먼트에 한 번만 부착.
- viewer scene_params_to_ifc() 에서 camber_mid_mm 매핑.

## Sprint 38: cimery-macros 크레이트 (proc-macro 스캐폴딩)
- 신규 크레이트, proc-macro = true, deps: syn/quote/proc-macro2.
- #[derive(ParamSummary)] 구현:
  · 구조체 named field 의 PARAM_COUNT (usize) + PARAM_NAMES (&[&str]) 생성.
  · 선언 순서 보존, 빈 구조체 지원, tuple/enum 은 컴파일 에러.
- 테스트 3개 (tests/derive_test.rs).
- ADR-002 D 로드맵: #[param(unit, range, default)] 전면 attribute 는 후속.

## Sprint 39: 변단면 거더 (Variable Depth)
- SceneParams.variable_depth_mm (0~800mm) 추가.
- apply_variable_depth(mesh, z0, z1, max, girder_h):
  · lift(u) = 4·max·u·(span-u)/span²  (중앙에서 최대)
  · y_new = y + lift(u)·(1 - y/h)
  · 상면 y=h 는 고정, 소핏 y=0 을 최대 lift 만큼 올림. 연속교 중앙부
    web 축소 관례와 정합. camber 와 독립 조합 가능.
- build_bridge_scene / build_selectable_scene 거더 생성 루프에 각각 적용
  (거더 local 좌표계에서 먼저 → translate → camber 순).
- UI "변단면 (mm)" 슬라이더 (선형·기하 섹션).
- ProjectFile variable_depth_mm 필드 (default 0).

모든 테스트 통과: kernel 18 + ifc 20 + macros 3.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

PROGRESS.md

@@ -12,6 +12,11 @@
 ## 타임라인
 
 ### 2026-04-15 (계속)
+- code — Sprint 36~39: IFC Alignment + Camber + proc-macro 스캐폴딩 + 변단면 거더.
+  - Sprint 36 (IFC Phase 3b): IfcAlignment + 직선 horizontal/constantgradient vertical segment + IfcRelNests 계층. `write_straight_alignment()` helper. Site 가 Bridge·Alignment 동시 aggregate.
+  - Sprint 37 (IFC Camber): `BridgeExportParams.camber_mid_mm` 추가. camber > 0 일 때 거더를 `CAMBER_SEGMENTS`(=10)개 세그먼트로 분할, 각 세그먼트 Y 오프셋에 포물선 값 적용. Pset 는 첫 세그먼트에만 부착(전체 거더 대표). viewer scene_params_to_ifc 에 매핑.
+  - Sprint 38 (proc-macro 스캐폴딩): `cimery-macros` 크레이트 신설 (proc-macro=true, syn/quote/proc-macro2). `#[derive(ParamSummary)]` 구현 — struct named field 개수·이름 compile-time 상수 생성. 테스트 3개 (count/names/empty). ADR-002 D `#[param(unit,range,default)]` 전면 구현은 후속 스프린트.
+  - Sprint 39 (변단면 거더): `SceneParams.variable_depth_mm`(0~800mm) 추가. `apply_variable_depth()` — 경간 [z0,z1]에서 포물선 soffit lift 를 정점 Y 에 선형 보간 적용(`y_new = y + lift(u)·(1 - y/h)`). 거더 상면은 고정, 소핏이 중앙부에서 올라가 web 축소 → 연속교 관례 형상. camber 와 독립 조합 가능.
 - code — Sprint 35: IFC 뷰어 통합 + Pset_BeamCommon.
   - `cimery-viewer` 에 `cimery-ifc` 의존성 추가. `project_file::scene_params_to_ifc()` 변환 함수 (SceneParams → BridgeExportParams 전 필드 매핑).
   - 프로젝트 섹션에 "📤 IFC4X3 익스포트" 버튼. `projects/bridge.ifc` 로 저장, 현재 파라미터(경간 수·교각 형식·skew·헌치·단면 등) 그대로 반영.

cimery/Cargo.toml

@@ -9,6 +9,7 @@ members = [
     "crates/viewer",
     "crates/usd",
     "crates/ifc",
+    "crates/macros",
     "crates/app",
 ]
 resolver = "2"
@@ -30,8 +31,14 @@ cimery-incremental = { path = "crates/incremental" }
 cimery-evaluator   = { path = "crates/evaluator" }
 cimery-usd         = { path = "crates/usd" }
 cimery-ifc         = { path = "crates/ifc" }
+cimery-macros      = { path = "crates/macros" }
 cimery-app         = { path = "crates/app" }
 
+# proc-macro support (Sprint 38)
+syn        = { version = "2", features = ["full", "extra-traits"] }
+quote      = "1"
+proc-macro2 = "1"
+
 # Serialization
 serde      = { version = "1", features = ["derive"] }
 serde_json = "1"

cimery/crates/ifc/src/bridge_export.rs

@@ -50,8 +50,15 @@ pub struct BridgeExportParams {
     pub haunch_depth:   f64,  // mm
     pub show_parapets:  bool,
     pub show_joints:    bool,
+    /// Sprint 37: 거더 중앙 camber 솟음량 [mm]. 0 = 직선.
+    /// > 0 일 때는 beam 을 `CAMBER_SEGMENTS` 개로 분할해 포물선 근사.
+    pub camber_mid_mm:  f64,
 }
 
+/// Sprint 37: camber > 0 일 때 각 거더를 N 개 세그먼트로 분할.
+/// 각 세그먼트는 독립 IfcBeam(extrude) 로 Y 오프셋 차등 적용.
+const CAMBER_SEGMENTS: usize = 10;
+
 impl Default for BridgeExportParams {
     fn default() -> Self {
         Self {
@@ -68,6 +75,7 @@ impl Default for BridgeExportParams {
             haunch_depth:   0.0,
             show_parapets:  true,
             show_joints:    true,
+            camber_mid_mm:  0.0,
         }
     }
 }
@@ -115,18 +123,28 @@ pub fn export_bridge(p: &BridgeExportParams) -> String {
         ),
     );
 
-    // Project aggregates Site, Site aggregates Bridge
+    // Project aggregates Site, Site aggregates Bridge + Alignment
     w.write(&format!(
         "IFCRELAGGREGATES({},$,$,$,{},({}))",
         lit(&new_ifc_guid()),
         project,
         site,
     ));
+
+    // Sprint 36: IfcAlignment — 교량 선형(직선 horizontal + 평지 vertical).
+    // Phase 3b 단순화: 교량 시점(0,0,0) 에서 total_mm 만큼 직선, 경사 0.
+    let alignment = write_straight_alignment(
+        &mut w, world_placement, geom_ctx,
+        p.span_m * p.span_count as f64 * 1_000.0,
+    );
+
+    // Site 가 Bridge 와 Alignment 를 동시에 집계.
     w.write(&format!(
-        "IFCRELAGGREGATES({},$,$,$,{},({}))",
+        "IFCRELAGGREGATES({},$,$,$,{},({},{}))",
         lit(&new_ifc_guid()),
         site,
         bridge,
+        alignment,
     ));
 
     // ── Bridge elements ───────────────────────────────────────────────────
@@ -137,37 +155,60 @@ pub fn export_bridge(p: &BridgeExportParams) -> String {
     let total_mm   = span_mm * span_count as f64;
 
     let skew_rad = p.skew_deg.to_radians();
+    let use_camber = p.camber_mid_mm.abs() > 0.1;
 
-    // Girders (span_count × girder_count) — Phase 2: PSC-I 실제 단면.
+    // Girders (span_count × girder_count) — 거더 직선 유지(precast 관례).
-    // 거더는 직선 유지(precast 관례) → skew 미적용.
+    // Sprint 37: camber 있으면 CAMBER_SEGMENTS 분할 근사.
     for s in 0..span_count {
         let z0 = span_mm * s as f64;
         for i in 0..p.girder_count {
             let x = (i as f64 - (p.girder_count as f64 - 1.0) * 0.5) * p.girder_spacing;
+            let beam_center_y = p.bearing_height + p.girder_height * 0.5;
+            let girder_label = format!("Girder S{}-G{}", s + 1, i + 1);
+
+            if !use_camber {
+                // 직선 — 단일 extrude.
                 let placement = write_local_placement(
-                &mut w,
+                    &mut w, world_placement,
-                world_placement,
+                    x, beam_center_y, z0 + span_mm * 0.5,
-                x,
-                p.bearing_height + p.girder_height * 0.5,
-                z0 + span_mm * 0.5,
                 );
                 let profile = write_girder_profile(&mut w, p.section_kind, p.girder_height);
                 let shape = write_extrude_shape(&mut w, geom_ctx, profile, span_mm);
                 let beam = w.alloc();
-            let girder_label = format!("Girder S{}-G{}", s + 1, i + 1);
+                w.emit(beam, &format!(
-            w.emit(
-                beam,
-                &format!(
                     "IFCBEAM({},$,{},$,$,{},{},$,.BEAM.)",
-                    lit(&new_ifc_guid()),
+                    lit(&new_ifc_guid()), lit(&girder_label), placement, shape,
-                    lit(&girder_label),
+                ));
-                    placement,
-                    shape,
-                ),
-            );
-            // Pset_BeamCommon (Sprint 35).
                 write_pset_beam_common(&mut w, beam, &girder_label, span_mm);
                 elements.push(beam);
+            } else {
+                // Camber — N 세그먼트로 포물선 Y 오프셋 근사.
+                let seg_len = span_mm / CAMBER_SEGMENTS as f64;
+                for k in 0..CAMBER_SEGMENTS {
+                    let u_mid = (k as f64 + 0.5) * seg_len; // 세그먼트 중심 u
+                    let y_off = 4.0 * p.camber_mid_mm * u_mid * (span_mm - u_mid)
+                                / (span_mm * span_mm);
+                    let placement = write_local_placement(
+                        &mut w, world_placement,
+                        x, beam_center_y + y_off,
+                        z0 + (k as f64 + 0.5) * seg_len,
+                    );
+                    let profile = write_girder_profile(&mut w, p.section_kind, p.girder_height);
+                    let shape = write_extrude_shape(&mut w, geom_ctx, profile, seg_len);
+                    let beam = w.alloc();
+                    w.emit(beam, &format!(
+                        "IFCBEAM({},$,{},$,$,{},{},$,.BEAM.)",
+                        lit(&new_ifc_guid()),
+                        lit(&format!("{}-seg{}", girder_label, k + 1)),
+                        placement, shape,
+                    ));
+                    // Pset 는 첫 세그먼트에만 (전체 거더 속성으로 처리).
+                    if k == 0 {
+                        write_pset_beam_common(&mut w, beam, &girder_label, span_mm);
+                    }
+                    elements.push(beam);
+                }
+            }
         }
     }
 
@@ -441,6 +482,96 @@ fn write_girder_profile(
     }
 }
 
+/// Sprint 36 Phase 3b: 직선 수평·평지 수직 IfcAlignment 생성.
+///
+/// # 구조 (IFC4X3)
+/// ```text
+/// IfcAlignment
+///   └ IfcRelNests
+///       ├ IfcAlignmentHorizontal
+///       │   └ IfcRelNests → IfcAlignmentSegment(LINE)
+///       └ IfcAlignmentVertical
+///           └ IfcRelNests → IfcAlignmentSegment(CONSTANTGRADIENT)
+/// ```
+///
+/// Phase 3b 단순화: 직선·평지 고정. curve/grade 는 SceneParams 확장 후 Phase 3c.
+fn write_straight_alignment(
+    w:                &mut IfcWriter,
+    world_placement:  Ref,
+    _geom_ctx:        Ref,
+    total_mm:         f64,
+) -> Ref {
+    // ── Horizontal alignment segment (LINE) ───────────────────────────────
+    let start_pt = w.write(&format!("IFCCARTESIANPOINT(({},{}))", real(0.0), real(0.0)));
+    let h_seg_def = w.write(&format!(
+        "IFCALIGNMENTHORIZONTALSEGMENT($,$,{},{},$,{},{},$,.LINE.)",
+        start_pt,                      // StartPoint (2D)
+        real(0.0),                     // StartDirection [rad]
+        real(total_mm),                // SegmentLength
+        real(0.0),                     // StartRadiusOfCurvature (0 = line)
+    ));
+    let h_seg = w.write(&format!(
+        "IFCALIGNMENTSEGMENT({},$,$,$,$,{},$,{})",
+        lit(&new_ifc_guid()),
+        world_placement,
+        h_seg_def,
+    ));
+    let horizontal = w.write(&format!(
+        "IFCALIGNMENTHORIZONTAL({},$,'Horizontal',$,$,{},$)",
+        lit(&new_ifc_guid()),
+        world_placement,
+    ));
+    w.write(&format!(
+        "IFCRELNESTS({},$,$,$,{},({}))",
+        lit(&new_ifc_guid()),
+        horizontal,
+        h_seg,
+    ));
+
+    // ── Vertical alignment segment (constant gradient = 0) ────────────────
+    let v_seg_def = w.write(&format!(
+        "IFCALIGNMENTVERTICALSEGMENT($,$,{},{},{},{},{},$,.CONSTANTGRADIENT.)",
+        real(0.0),        // StartDistAlong
+        real(total_mm),   // HorizontalLength
+        real(0.0),        // StartHeight
+        real(0.0),        // StartGradient
+        real(0.0),        // EndGradient
+    ));
+    let v_seg = w.write(&format!(
+        "IFCALIGNMENTSEGMENT({},$,$,$,$,{},$,{})",
+        lit(&new_ifc_guid()),
+        world_placement,
+        v_seg_def,
+    ));
+    let vertical = w.write(&format!(
+        "IFCALIGNMENTVERTICAL({},$,'Vertical',$,$,{},$)",
+        lit(&new_ifc_guid()),
+        world_placement,
+    ));
+    w.write(&format!(
+        "IFCRELNESTS({},$,$,$,{},({}))",
+        lit(&new_ifc_guid()),
+        vertical,
+        v_seg,
+    ));
+
+    // ── Alignment aggregate ───────────────────────────────────────────────
+    let alignment = w.write(&format!(
+        "IFCALIGNMENT({},$,'Bridge Alignment',$,$,{},$,.USERDEFINED.,$)",
+        lit(&new_ifc_guid()),
+        world_placement,
+    ));
+    w.write(&format!(
+        "IFCRELNESTS({},$,$,$,{},({},{}))",
+        lit(&new_ifc_guid()),
+        alignment,
+        horizontal,
+        vertical,
+    ));
+
+    alignment
+}
+
 /// Pset_BeamCommon 생성 + `IfcRelDefinesByProperties` 로 beam 에 연결 (Sprint 35 Phase 3a).
 ///
 /// # 속성
@@ -611,6 +742,45 @@ mod tests {
         assert_ne!(zero, skewed);
     }
 
+    #[test]
+    fn camber_zero_produces_single_beam_per_girder() {
+        let p = BridgeExportParams {
+            camber_mid_mm: 0.0,
+            girder_count: 1,
+            span_count: 1,
+            ..Default::default()
+        };
+        let ifc = export_bridge(&p);
+        // 거더 1개 + 경간 1 → IFCBEAM 1 개.
+        assert_eq!(ifc.matches("IFCBEAM(").count(), 1);
+    }
+
+    #[test]
+    fn camber_positive_subdivides_beam() {
+        let p = BridgeExportParams {
+            camber_mid_mm: 50.0,
+            girder_count: 1,
+            span_count: 1,
+            ..Default::default()
+        };
+        let ifc = export_bridge(&p);
+        // 10 세그먼트 → IFCBEAM 10 개.
+        assert_eq!(ifc.matches("IFCBEAM(").count(), CAMBER_SEGMENTS);
+        // Pset 는 첫 세그먼트 1개만.
+        assert_eq!(ifc.matches("'Pset_BeamCommon'").count(), 1);
+    }
+
+    #[test]
+    fn alignment_present_in_output() {
+        let ifc = export_bridge(&BridgeExportParams::default());
+        assert!(ifc.contains("IFCALIGNMENT("), "IfcAlignment missing");
+        assert!(ifc.contains("IFCALIGNMENTHORIZONTAL("), "horizontal missing");
+        assert!(ifc.contains("IFCALIGNMENTVERTICAL("), "vertical missing");
+        assert!(ifc.contains("IFCALIGNMENTSEGMENT("), "segment missing");
+        assert!(ifc.contains(".LINE."), "horizontal LINE predefined type missing");
+        assert!(ifc.contains(".CONSTANTGRADIENT."), "vertical CONSTANTGRADIENT missing");
+    }
+
     #[test]
     fn pset_beam_common_attached_to_girders() {
         let ifc = export_bridge(&BridgeExportParams::default());

cimery/crates/macros/Cargo.toml

@@ -0,0 +1,13 @@
+[package]
+name    = "cimery-macros"
+version.workspace = true
+edition.workspace = true
+description = "proc-macro helpers for cimery DSL (Sprint 38 scaffolding)."
+
+[lib]
+proc-macro = true
+
+[dependencies]
+syn         = { workspace = true }
+quote       = { workspace = true }
+proc-macro2 = { workspace = true }

cimery/crates/macros/src/lib.rs

@@ -0,0 +1,82 @@
+//! cimery-macros — Feature DSL proc-macro 인프라 (Sprint 38).
+//!
+//! # 현재 범위
+//! - `#[derive(ParamSummary)]` — 구조체의 필드 이름·개수·타입을 컴파일 타임에
+//!   요약 제공. UI 자동생성·파라미터 인스펙터의 기반.
+//!
+//! # ADR-002 D 로드맵 (미래)
+//! - `#[param(unit="mm", range=1000..=3000, default=1800)]` 속성 attribute
+//! - `#[derive(Feature)]` — validation / builder / IFC 매핑 자동 생성
+//! - 선언적 `feature!` 매크로 — DSL 설탕
+//!
+//! # 현 시점 사용 예
+//! ```ignore
+//! use cimery_macros::ParamSummary;
+//!
+//! #[derive(ParamSummary)]
+//! pub struct GirderParams {
+//!     pub total_height:     f64,
+//!     pub top_flange_width: f64,
+//! }
+//!
+//! fn main() {
+//!     assert_eq!(GirderParams::PARAM_COUNT, 2);
+//!     assert_eq!(GirderParams::PARAM_NAMES, &["total_height", "top_flange_width"]);
+//! }
+//! ```
+
+use proc_macro::TokenStream;
+use quote::quote;
+use syn::{parse_macro_input, Data, DeriveInput, Fields};
+
+/// `#[derive(ParamSummary)]` — named field 구조체의 필드 이름·개수 상수 생성.
+///
+/// - `Self::PARAM_COUNT: usize`
+/// - `Self::PARAM_NAMES: &'static [&'static str]`
+///
+/// # 제약
+/// - named field 구조체만 지원 (tuple/unit/enum 은 컴파일 에러).
+/// - 모든 필드가 노출됨 (private 필드 포함). 필터링은 Phase 2.
+#[proc_macro_derive(ParamSummary)]
+pub fn derive_param_summary(input: TokenStream) -> TokenStream {
+    let input = parse_macro_input!(input as DeriveInput);
+    let name = &input.ident;
+
+    let fields = match &input.data {
+        Data::Struct(s) => match &s.fields {
+            Fields::Named(named) => &named.named,
+            _ => {
+                return syn::Error::new_spanned(
+                    name,
+                    "ParamSummary only supports structs with named fields",
+                )
+                .to_compile_error()
+                .into();
+            }
+        },
+        _ => {
+            return syn::Error::new_spanned(
+                name,
+                "ParamSummary only supports structs, not enums or unions",
+            )
+            .to_compile_error()
+            .into();
+        }
+    };
+
+    let names: Vec<String> = fields
+        .iter()
+        .filter_map(|f| f.ident.as_ref().map(|i| i.to_string()))
+        .collect();
+    let count = names.len();
+
+    let expanded = quote! {
+        impl #name {
+            /// `#[derive(ParamSummary)]` 로 생성된 필드 개수.
+            pub const PARAM_COUNT: usize = #count;
+            /// `#[derive(ParamSummary)]` 로 생성된 필드 이름 목록 (선언 순서).
+            pub const PARAM_NAMES: &'static [&'static str] = &[ #( #names ),* ];
+        }
+    };
+    expanded.into()
+}

cimery/crates/macros/tests/derive_test.rs

@@ -0,0 +1,34 @@
+//! `#[derive(ParamSummary)]` 기본 동작 검증.
+
+use cimery_macros::ParamSummary;
+
+#[derive(ParamSummary)]
+#[allow(dead_code)]
+struct GirderParams {
+    pub total_height:     f64,
+    pub top_flange_width: f64,
+    pub web_thickness:    f64,
+}
+
+#[test]
+fn param_count_matches_field_count() {
+    assert_eq!(GirderParams::PARAM_COUNT, 3);
+}
+
+#[test]
+fn param_names_in_declaration_order() {
+    assert_eq!(
+        GirderParams::PARAM_NAMES,
+        &["total_height", "top_flange_width", "web_thickness"],
+    );
+}
+
+#[derive(ParamSummary)]
+#[allow(dead_code)]
+struct Empty {}
+
+#[test]
+fn empty_struct_handled() {
+    assert_eq!(Empty::PARAM_COUNT, 0);
+    assert_eq!(Empty::PARAM_NAMES, &[] as &[&str]);
+}

cimery/crates/viewer/src/bridge_scene.rs

@@ -65,6 +65,10 @@ pub struct SceneParams {
     /// 데크 헌치 (Haunch) 깊이 [mm]. Sprint 31.
     /// 거더 상부와 데크 soffit 사이 전환부 두께. 0 = 헌치 없음(데크 = 거더 상부 직접 접촉).
     pub haunch_depth: f32,
+    /// 변단면 거더 (Variable Depth, Sprint 39).
+    /// 연속교의 경우 지점부가 높고 경간 중앙이 낮은 포물선 변화.
+    /// 값 = 지점 대비 중앙부 단면 높이 **감소량** [mm]. 0 = 상수 단면.
+    pub variable_depth_mm: f32,
 }
 
 impl Default for SceneParams {
@@ -86,6 +90,7 @@ impl Default for SceneParams {
             show_diaphragms: true,
             camber_mid_mm: 0.0,
             haunch_depth: 0.0,
+            variable_depth_mm: 0.0,
         }
     }
 }
@@ -154,6 +159,27 @@ fn translate(mut mesh: Mesh, dx: f32, dy: f32, dz: f32) -> Mesh {
     mesh
 }
 
+/// Sprint 39: 변단면 거더 — 지점부 대비 중앙 단면 높이 감소 (연속교 관례).
+/// 경간 [z0, z1] 에서 soffit 을 포물선으로 들어올림:
+///   u = z - z0 ∈ [0, span]
+///   soffit_lift(u) = 4·max·u·(span-u) / span²  (u=span/2 에서 최대)
+/// 각 정점 Y 를 선형 보간:
+///   y_new = y + lift(u) · (1 - y/h)
+/// → y=0(소핏) 에서 lift 만큼 들어올리고, y=h(상면) 에서 0.
+fn apply_variable_depth(mesh: &mut Mesh, z0: f32, z1: f32, max_mm: f32, girder_h: f32) {
+    if max_mm.abs() < 1e-3 || girder_h <= 0.0 { return; }
+    let span = z1 - z0;
+    if span <= 0.0 { return; }
+    for v in &mut mesh.vertices {
+        let u = v[2] - z0;
+        if u > 0.0 && u < span {
+            let lift = 4.0 * max_mm * u * (span - u) / (span * span);
+            let t = 1.0 - (v[1] / girder_h).clamp(0.0, 1.0);
+            v[1] += lift * t;
+        }
+    }
+}
+
 /// Sprint 30: Camber(솟음) 포물선 Y 오프셋.
 /// 경간 [z0, z1] 내에서 중앙에서 `mid_mm` 만큼 위로 솟음.
 /// z - z0 = u ∈ [0, span]. y_off = 4 · mid · u · (span - u) / span²  (중앙 u=span/2 에서 최대 = mid)
@@ -261,6 +287,10 @@ pub fn build_bridge_scene<K: GeomKernel>(kernel: &K, p: &SceneParams) -> Result<
             };
             let mut mesh = kernel.girder_mesh(&ir)?;
             mesh.recolor(COL_GIRDER);
+            // Variable depth 는 거더 local 좌표계(Y=0 소핏 기준)에서 먼저 적용, 그 후 translate.
+            apply_variable_depth(
+                &mut mesh, 0.0, span_mm, p.variable_depth_mm, girder_h,
+            );
             let mut placed = translate(mesh, x, 0.0, z_base);
             apply_camber_mesh(&mut placed, z_base, z_end, p.camber_mid_mm);
             parts.push(placed);
@@ -607,6 +637,10 @@ pub fn build_selectable_scene<K: GeomKernel>(
             };
             let mut mesh = kernel.girder_mesh(&ir)?;
             mesh.recolor(COL_GIRDER);
+            // Variable depth: local 좌표(Z: 0~span_mm)에서 먼저 적용.
+            apply_variable_depth(
+                &mut mesh, 0.0, span_mm, p.variable_depth_mm, girder_h,
+            );
             for v in &mut mesh.vertices { v[0] += x; v[2] += z_base; }
             apply_camber_mesh(&mut mesh, z_base, z_end, p.camber_mid_mm);
             let label = if span_count > 1 {

cimery/crates/viewer/src/lib.rs

@@ -656,6 +656,8 @@ impl RenderState {
                         .show(ui, |ui| {
                             ps!(ui, "경사각 (°)",       &mut p.skew_deg,       -30.0..=30.0,      1.0);
                             ps!(ui, "솟음 (mm)",        &mut p.camber_mid_mm,  0.0..=200.0,       5.0);
+                            // Sprint 39: 변단면 거더
+                            ps!(ui, "변단면 (mm)",      &mut p.variable_depth_mm, 0.0..=800.0,    20.0);
                         });
 
                     // ── 하부구조 (Substructure) ───────────────────────────

cimery/crates/viewer/src/project_file.rs

@@ -47,6 +47,9 @@ pub struct ProjectFile {
     /// Sprint 31: 데크 헌치(Haunch) 깊이 [mm]
     #[serde(default)]
     pub haunch_depth:          f32,
+    /// Sprint 39: 변단면 거더 중앙부 높이 감소 [mm]
+    #[serde(default)]
+    pub variable_depth_mm:     f32,
 }
 
 fn default_true() -> bool { true }
@@ -81,6 +84,7 @@ impl ProjectFile {
             show_diaphragms:       p.show_diaphragms,
             camber_mid_mm:         p.camber_mid_mm,
             haunch_depth:          p.haunch_depth,
+            variable_depth_mm:     p.variable_depth_mm,
         }
     }
 
@@ -108,6 +112,7 @@ impl ProjectFile {
             show_diaphragms:       self.show_diaphragms,
             camber_mid_mm:         self.camber_mid_mm,
             haunch_depth:          self.haunch_depth,
+            variable_depth_mm:     self.variable_depth_mm,
         }
     }
 
@@ -163,5 +168,6 @@ pub fn scene_params_to_ifc(p: &SceneParams, name: &str) -> cimery_ifc::BridgeExp
         haunch_depth:   p.haunch_depth as f64,
         show_parapets:  true,
         show_joints:    p.show_expansion_joints,
+        camber_mid_mm:  p.camber_mid_mm as f64,
     }
 }